Kinetics of arsenic-enhanced solid phase epitaxy in silicon

2004 ◽  
Vol 95 (8) ◽  
pp. 4427-4431 ◽  
Author(s):  
B. C. Johnson ◽  
J. C. McCallum
Keyword(s):  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Kinetics Of

Kinetics of solid phase epitaxy in thick amorphous Si layers formed by MeV ion implantation

1990 ◽  
Vol 57 (13) ◽  
pp. 1340-1342 ◽  
Author(s):  
J. A. Roth ◽  
G. L. Olson ◽  
D. C. Jacobson ◽  
J. M. Poate
Keyword(s):  
Ion Implantation ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Amorphous Si ◽  
Kinetics Of

The Effect of Hydrogen on the Kinetics of Solid Phase Epitaxy in Amorphous Silicon

1990 ◽  
Vol 205 ◽  
Author(s):  
J. A. Roth ◽  
G. L. Olson ◽  
D. C. Jacobson ◽  
J. M. Poate ◽  
C. Kirschbaum
Keyword(s):  
Growth Rate ◽  
Solid Phase ◽  
Intrinsic Value ◽  
Amorphous Layer ◽  
Inert Gas ◽  
Solid Phase Epitaxy ◽  
Depth Profiles ◽  
Kinetics Of ◽  
Crystal Interface ◽  
Good Agreement

AbstractThis paper discusses the intrusion of H into a-Si layers during solid phase epitaxy and the effect of this H on the growth kinetics. We show that during annealing in the presence of water vapor, H is continuously generated at the oxidizing a-Si surface and diffuses into the amorphous layer, where it causes a reduction in the epitaxial growth rate. The measured variation of growth rate with the depth of the amorphous/crystal interface is correlated with the concentration of H at the interface. The diffusion coefficient for H in a-Si is determined by comparing measured depth profiles with calculated values. Hydrogen intrusion is observed even in layers annealed in vacuum and in inert gas ambients. Thin (<;5000 Åthick) a-Si layers are especially susceptible to this effect, but we show that in spite of the presence of H the activation energy for SPE derived earlier from thin-layer data is in good agreement with the intrinsic value obtained from thick, hydrogen-free layers.

The Loss Kinetics of Substitutional Carbon in Si1-xCxRegrown by Solid Phase Epitaxy

2001 ◽  
Vol 40 (Part 1, No. 2A) ◽  
pp. 773-776 ◽  
Author(s):  
Yong Jeong Kim ◽  
Tae-Joon Kim ◽  
Tae-Kyung Kim ◽  
Byungwoo Park ◽  
Jong Han Song
Keyword(s):  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Kinetics Of

Crystallization Kinetics of Fe-DOPED A1203

1994 ◽  
Vol 357 ◽  
Author(s):  
Todd W. Simpson ◽  
Ian V. Mitchell ◽  
Ning Yu ◽  
Michael Nastasi ◽  
Paul C. Mcintyre
Keyword(s):  
Crystallization Kinetics ◽  
Annealing Temperature ◽  
Rutherford Backscattering Spectrometry ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Time Resolved ◽  
Α Phase ◽  
Kinetics Of ◽  
Beam Deposition

AbstractTime resolved optical reflectivity (TRR) and Rutherford backscattering spectrometry (RBS) and ion channelling methods have been applied to determine the crystallization kinetics of Fe-doped A1203 in the temperature range of 900-1050°C. Amorphous A1203 films, approximately 250 nm thick and with Fe cation concentrations of 0, 1.85, 2.2 and 4.5%, were formed by e-beam deposition on single crystal, [0001] oriented, A1203 substrates. Annealing was performed under an oxygen ambient in a conventional tube furnace, and the optical changes which accompany crystallization were monitored, in situ, by TRR with a 633nm wavelength laser.Crystallization is observed to proceed via solid phase epitaxy. An intermediate, epitaxial phase of -γ-Al203 is formed before the samples reach the ultimate annealing temperature. The 5% Fe-doped film transforms from γ to α-A1203 at a rate approximately 10 times that of the pure A1203 film and the 1.85% and 2.2% Fe-doped films transform at rates between these two extremes. The Fe-dopants occupy substitional lattice sites in the epilayer. Each of the four sets of specimens displays an activation energy in the range 5.0±0.2eV for the γ,α phase transition.

Kinetics and Mechanisms of Solid Phase Epitaxy and Competitive Processes in Silicon

1984 ◽  
Vol 35 ◽  
Author(s):  
G.L. Olson
Keyword(s):  
Amorphous Silicon ◽  
Epitaxial Growth ◽  
Recent Progress ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Temperature Dependent ◽  
Solid Phase Crystallization ◽  
Induced Changes ◽  
Kinetics Of ◽  
Very High

ABSTRACTRecent progress in studies of temperature dependent kinetic competition during solid phase crystallization of silicon is reviewed. Specific areas which are emphasized include: the enhancement of solid phase epitaxial growth rates by impurity-induced changes in electronic properties at the crystal/amorphous interface, the influence of impurity diffusion and precipitation in amorphous silicon on the kinetics of epitaxial growth, the effects of impurities on the kinetic competition between solid phase epitaxy and random crystallization, and the kinetics of solid phase crystallization at very high temperatures in silicon.

Growth kinetics of iron silicides fabricated by solid phase epitaxy or ion beam synthesis

1992 ◽  
Vol 215 (1) ◽  
pp. 76-83 ◽  
Author(s):  
K. Radermacher ◽  
S. Mantl ◽  
Ch. Dieker ◽  
H. Lüth ◽  
C. Freiburg
Keyword(s):  
Growth Kinetics ◽  
Solid Phase ◽  
Ion Beam ◽  
Solid Phase Epitaxy ◽  
Iron Silicides ◽  
Ion Beam Synthesis ◽  
Kinetics Of

Kinetics of Intrinsic and Dopant-Enhanced Solid Phase Epitaxy in Buried Amorphous Si Layers

1996 ◽  
Vol 439 ◽  
Author(s):  
J. C. McCallum
Keyword(s):  
Ion Implantation ◽  
Dopant Concentration ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Entire Concentration Range ◽  
Time Resolved ◽  
Amorphous Si ◽  
First Time ◽  
Kinetics Of ◽  
Suitable Environment

AbstractThe kinetics of intrinsic and dopant-enhanced solid phase epitaxy (SPE) have been measured in buried amorphous Si (a-Si) layers produced by ion implantation. Buried a-Si layers formed by self-ion implantation provide a suitable environment for studies of the intrinsic growth kinetics of amorphous Si, free from the rate-retarding effects of H. For the first time, dopant-enhanced SPE rates have been measured under these H-free conditions. Buried a-Si layers containing uniform As concentration profiles ranging from 1–16.1 × 1019 As.cm−3 were produced by multiple-energy ion implantation and time resolved reflectivity was used to measure SPE rates over the temperature range 480–660°C. In contrast to earlier studies, the dopant-enhanced SPE rate is found to depend linearly on the As concentration over the entire concentration range measured. The SPE rate can be expressed in the form, v/vi(T) = 1 + N/[No exp(-ΔE/kT)], where vi(T) is the intrinsic SPE rate, N is the dopant concentration and No = 1.2 × 1021 cm−3, ΔE = 0.21 eV.

Process and Mechanism of CoSi2/Si Solid Phase Epitaxy by Multilayer Reaction

1999 ◽  
Vol 580 ◽  
Author(s):  
Bing-Zong Li ◽  
Xin-Ping Qu ◽  
Guo-Ping Ru ◽  
Ning Wang ◽  
Paul Chu
Keyword(s):  
Epitaxial Growth ◽  
Solid Phase ◽  
Amorphous Layer ◽  
Solid Phase Epitaxy ◽  
Initial Stage ◽  
Vital Effect ◽  
Amorphous Si ◽  
Kinetics Of ◽  
State Amorphization

AbstractA multilayer structure of Co/a-Si/Ti/Si(100) together with Co/Ti/Si(100) is applied to investigate the process and mechanism of CoSi2 epitaxial growth on a Si(100) substrate. The experimental results show that by adding an amorphous Si layer with a certain thickness, the epitaxial quality of CoSi2 is significantly improved. A multi-element amorphous layer is formed by a solid state amorphization reaction at the initial stage of the multilayer reaction. This layer acts as a diffusion barrier, which controls the atomic interdiffusion of Co and Si and limits the supply of Co atoms. It has a vital effect on the multilayer reaction kinetics, and the epitaxial growth of CoSi2 on Si. The kinetics of the CoSi2 growth process from multilayer reactions is investigated.

Lateral Solid Phase Epitaxy of Evaporated Amorphous Si Films onto SiO2 Patterns

1983 ◽  
Vol 25 ◽  
Author(s):  
H. Yamamoto ◽  
H. Ishiwara ◽  
S. Furukawa ◽  
M. Tamura ◽  
T. Tokuyama
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Implantation ◽  
Solid Phase ◽  
Solid Phase Epitaxy ◽  
Si Substrates ◽  
Transmission Electron ◽  
Amorphous Si ◽  
Si Films ◽  
Kinetics Of

ABSTRACTLateral solid phase epitaxy (L-SPE) of amorphous Si (a-Si) films vacuum-evaporated on Si substrates with SiO2 patterns has been investigated, in which the film first grows vertically in the regions directly contacted to the Si substrates and then grows laterally onto SiO2 patterns. It has been found from transmission electron microscopy and Nomarski optical microscopy that use of dense a-Si films, which are formed by evaporation on heated substrates and subsequent amorphization by Si+ ion implantation, is essentially important for L-SPE. The maximum L-SPE length of 5–6μm was obtained along the <010> direction after 10hourannealing at 600°C. The kinetics of the L-SPE growth has also been investigated.

Sign in / Sign up

Export Citation Format

Share Document