Two-dimensional reconstruction theory of thermal conductivity profiles based on the thermal wave technique

2002 ◽  
Vol 92 (7) ◽  
pp. 4088-4094 ◽  
Author(s):  
Q. B. Zhou ◽  
Y. K. Lu ◽  
S. Y. Zhang ◽  
J. C. Cheng ◽  
X. J. Shui
Keyword(s):  
Thermal Conductivity ◽  
Thermal Wave ◽  
Two Dimensional ◽  
Dimensional Reconstruction ◽  
Wave Technique

In-Situ Characterization of Thin Polycrystalline Diamond Film Quality by Thermal Wave and Raman Techniques

1989 ◽  
Vol 162 ◽  
Author(s):  
R. W. Pryor ◽  
P. K. Kuo ◽  
L. Wei ◽  
R. L. Thomas ◽  
P. L. Talley
Keyword(s):  
Thermal Conductivity ◽  
Laser Beam ◽  
Probe Beam ◽  
Diamond Film ◽  
Thermal Wave ◽  
Diamond Films ◽  
Film Surface ◽  
Polycrystalline Diamond ◽  
Probe Laser ◽  
Wave Technique

ABSTRACTIn this paper, the thermal wave technique and microfocus Raman spectroscopy are used to measure the relative quality of thin diamond films deposited on silicon. The thermal wave technique uses a modulated heating laser beam, normal to the diamond film surface, to initiate a thermal wave which propagates into the film, the substrate, and the overlying gas(ses). The accompanying modulated gas density is then interrogated by a second (probe) laser beam. The probe beam is deflected by the corresponding periodic changes in the gradient of the refractive index of the gas. The measured probe beam deflection versus offset position is fitted, using a theoretical solution of the three-dimensional thermal diffusion equation for the gas/film/substrate system. The physically important fitting parameter is the thermal diffusivity of the diamond film. Thermal conductivities derived from our diffusivity measurements using this method compare well to previous measurements on similarly prepared films by other methods. Our measured values for the thermal conductivity of the highest-quality polycrystalline diamond films are of the order of 12 W/cm-K. Our measured values of thermal conductivity for diamond films range between this value and the thermal conductivity of graphite. We have also made measurements on bulk diamond using the thermal wave technique, and we obtain a thermal conductivity of 21 W/cm-K, in excellent agreement with values found in the literature. A multi-scan, microfocus ratio of “graphitic” material to diamond material for a relative assessment of film quality.

Computer Assisted Image Reconstruction of Oligomer Structure

1976 ◽  
Vol 34 ◽  
pp. 472-473
Author(s):  
A.M. Jones ◽  
A. Max Fiskin
Keyword(s):  
Three Dimensional ◽  
Depth Of Field ◽  
Computer Assisted ◽  
Projection Data ◽  
Two Dimensional ◽  
Single Particles ◽  
Dimensional Reconstruction ◽  
Computer Assisted Image ◽  
The Fourier Transform ◽  
Space Approach

If the tilt of a specimen can be varied either by the strategy of observing identical particles orientated randomly or by use of a eucentric goniometer stage, three dimensional reconstruction procedures are available (l). If the specimens, such as small protein aggregates, lack periodicity, direct space methods compete favorably in ease of implementation with reconstruction by the Fourier (transform) space approach (2). Regardless of method, reconstruction is possible because useful specimen thicknesses are always much less than the depth of field in an electron microscope. Thus electron images record the amount of stain in columns of the object normal to the recording plates. For single particles, practical considerations dictate that the specimen be tilted precisely about a single axis. In so doing a reconstructed image is achieved serially from two-dimensional sections which in turn are generated by a series of back-to-front lines of projection data.

Three-Dimensional Structure of Cloned T3 Connector Protein at 1.6nm Resolution

1990 ◽  
Vol 48 (1) ◽  
pp. 282-283
Author(s):  
José L. Carrascosa ◽  
José M. Valpuesta ◽  
Hisao Fujisawa
Keyword(s):  
Dna Sequences ◽  
Expression Vector ◽  
Three Dimensional ◽  
Deae Cellulose ◽  
Dna Packaging ◽  
Dimensional Structure ◽  
Two Dimensional ◽  
Freezing And Thawing ◽  
Three Dimensional Structure ◽  
Dimensional Reconstruction

The head to tail connector of bacteriophages plays a fundamental role in the assembly of viral heads and DNA packaging. In spite of the absence of sequence homology, the structure of connectors from different viruses (T4, Ø29, T3, P22, etc) share common morphological features, that are most clearly revealed in their three-dimensional structure. We have studied the three-dimensional reconstruction of the connector protein from phage T3 (gp 8) from tilted view of two dimensional crystals obtained from this protein after cloning and purification.DNA sequences including gene 8 from phage T3 were cloned, into Bam Hl-Eco Rl sites down stream of lambda promotor PL, in the expression vector pNT45 under the control of cI857. E R204 (pNT89) cells were incubated at 42°C for 2h, harvested and resuspended in 20 mM Tris HC1 (pH 7.4), 7mM 2 mercaptoethanol, ImM EDTA. The cells were lysed by freezing and thawing in the presence of lysozyme (lmg/ml) and ligthly sonicated. The low speed supernatant was precipitated by ammonium sulfate (60% saturated) and dissolved in the original buffer to be subjected to gel nitration through Sepharose 6B, followed by phosphocellulose colum (Pll) and DEAE cellulose colum (DE52). Purified gp8 appeared at 0.3M NaCl and formed crystals when its concentration increased above 1.5 mg/ml.

Three-Dimensional Reconstruction of Two Forms of the Chaperonin GRO EL

1990 ◽  
Vol 48 (1) ◽  
pp. 258-259
Author(s):  
J.L. Carrascosa ◽  
G. Abella ◽  
S. Marco ◽  
M. Muyal ◽  
J.M. Carazo
Keyword(s):  
Three Dimensional ◽  
The Other ◽  
Two Dimensional ◽  
Series Method ◽  
Three Dimensional Reconstruction ◽  
Structural Components ◽  
E Coli ◽  
Dimensional Reconstruction ◽  
Morphogenetic Factors ◽  
Tilt Series

Chaperonins are a class of proteins characterized by their role as morphogenetic factors. They trantsiently interact with the structural components of certain biological aggregates (viruses, enzymes etc), promoting their correct folding, assembly and, eventually transport. The groEL factor from E. coli is a conspicuous member of the chaperonins, as it promotes the assembly and morphogenesis of bacterial oligomers and/viral structures.We have studied groEL-like factors from two different bacteria:E. coli and B.subtilis. These factors share common morphological features , showing two different views: one is 6-fold, while the other shows 7 morphological units. There is also a correlation between the presence of a dominant 6-fold view and the fact of both bacteria been grown at low temperature (32°C), while the 7-fold is the main view at higher temperatures (42°C). As the two-dimensional projections of groEL were difficult to interprete, we studied their three-dimensional reconstruction by the random conical tilt series method from negatively stained particles.

scholarly journals Study of Thermometry in Two-Dimensional Sb2Te3 from Temperature-Dependent Raman Spectroscopy

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Manavendra P. Singh ◽  
Manab Mandal ◽  
K. Sethupathi ◽  
M. S. Ramachandra Rao ◽  
Pramoda K. Nayak
Keyword(s):  
Thermal Conductivity ◽  
Raman Spectroscopy ◽  
Temperature Coefficient ◽  
Heat Dissipation ◽  
Peak Position ◽  
Two Dimensional ◽  
Phonon Modes ◽  
Temperature Dependent ◽  
Excellent Candidate ◽  
High Figure

AbstractDiscovery of two-dimensional (2D) topological insulators (TIs) demonstrates tremendous potential in the field of thermoelectric since the last decade. Here, we have synthesized 2D TI, Sb2Te3 of various thicknesses in the range 65–400 nm using mechanical exfoliation and studied temperature coefficient in the range 100–300 K using micro-Raman spectroscopy. The temperature dependence of the peak position and line width of phonon modes have been analyzed to determine the temperature coefficient, which is found to be in the order of 10–2 cm−1/K, and it decreases with a decrease in Sb2Te3 thickness. Such low-temperature coefficient would favor to achieve a high figure of merit (ZT) and pave the way to use this material as an excellent candidate for thermoelectric materials. We have estimated the thermal conductivity of Sb2Te3 flake with the thickness of 115 nm supported on 300-nm SiO2/Si substrate which is found to be ~ 10 W/m–K. The slightly higher thermal conductivity value suggests that the supporting substrate significantly affects the heat dissipation of the Sb2Te3 flake.

scholarly journals Flame-retardant MXene/Polyimide Film with Outstanding Thermal and Mechanical Properties Based on the Secondary Orientation Strategy

2021 ◽  
Author(s):  
Yue Zhu ◽  
Qingyu Peng ◽  
Haowen Zheng ◽  
Fuhua Xue ◽  
Pengyang Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Transition Metal ◽  
Mechanical Performance ◽  
Polyimide Film ◽  
Polymeric Films ◽  
Two Dimensional ◽  
Thermal And Mechanical Properties ◽  
Metal Carbides ◽  
Transition Metal Carbides

With the development of multifunction and miniaturization in modern electronics, polymeric films with strong mechanical performance and high thermal conductivity are urgently needed. Two-dimensional transition metal carbides and nitrides (MXenes)...

TRIGGERING OF DETONATION PROCESSES IN PROPULSION CHAMBER

2021 ◽  
Vol 14 (2) ◽  
pp. 40-45
Author(s):  
D. V. VORONIN ◽  
Keyword(s):  
Thermal Conductivity ◽  
Numerical Modeling ◽  
Gas Flow ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Chemically Reacting ◽  
Plane Disk ◽  
And Diffusion

The Navier-Stokes equations have been used for numerical modeling of chemically reacting gas flow in the propulsion chamber. The chamber represents an axially symmetrical plane disk. Fuel and oxidant were fed into the chamber separately at some angle to the inflow surface and not parallel one to another to ensure better mixing of species. The model is based on conservation laws of mass, momentum, and energy for nonsteady two-dimensional compressible gas flow in the case of axial symmetry. The processes of viscosity, thermal conductivity, turbulence, and diffusion of species have been taken into account. The possibility of detonation mode of combustion of the mixture in the chamber was numerically demonstrated. The detonation triggering depends on the values of angles between fuel and oxidizer jets. This type of the propulsion chamber is effective because of the absence of stagnation zones and good mixing of species before burning.

Sign in / Sign up

Export Citation Format

Share Document