scholarly journals High-purity and high-quality 4H–SiC grown at high speed by chimney-type vertical hot-wall chemical vapor deposition

2002 ◽  
Vol 80 (9) ◽  
pp. 1586-1588 ◽  
Author(s):  
K. Fujihira ◽  
T. Kimoto ◽  
H. Matsunami
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
High Purity ◽  
High Speed ◽  
Chemical Vapor ◽  
High Quality

Low Temperature Preparation of High-Quality Pb(Zr,Ti)O3 Films by Metal Organic Chemical Vapor Deposition with High Reproducibility

2001 ◽  
Vol 688 ◽  
Author(s):  
Hiroshi Funakubo ◽  
Kuniharu Nagashima ◽  
Masanori Aratani ◽  
Kouji Tokita ◽  
Takahiro Oikawa ◽  
...  
Keyword(s):  
Chemical Vapor Deposition ◽  
Leakage Current ◽  
Leakage Current Density ◽  
Current Density ◽  
Vapor Deposition ◽  
Deposition Temperature ◽  
Chemical Vapor ◽  
Process Window ◽  
High Quality ◽  
Low Temperature Preparation

AbstractPb(Zr,Ti)O3 (PZT) is one of the most promising materials for ferroelectric random access memory (FeRAM) application. Among the various preparation methods, metalorganic chemical vapor deposition (MOCVD) has been recognized as a most important one to realize high density FeRAM because of its potential of high-step-coverage and large-area-uniformity of the film quality.In the present study, pulsed-MOCVD was developed in which a mixture of the source gases was pulsed introduced into reaction chamber with interval. By using this deposition technique, simultaneous improvements of the crystallinity, surface smoothness, and electrical property of the film have been reached by comparing to the conventional continuous gas-supplied MOCVD. Moreover, this film had larger remanent polarization (Pr) and lower leakage current density. This is owing to reevaporation of excess Pb element from the film and increase of migration on the surface of substrate during the interval time.This process is also very effective to decrease the deposition temperature of the film having high quality. In fact, the Pr and the leakage current density of polycrystalline Pb(Zr0.35Ti0.65)O3 film deposited at 415 °C were 41.4 μC/cm2 and on the order of 10−7 A/cm2 at 200 kV/cm. This Pr value was almost the same as that of the epitaxially grown film deposited at 415 °C with the same composition corrected for the orientation difference. This suggests that the polycrystalline PZT film prepared by pulsed-MOCVD had the epitaxial-grade ferroelectric properties even through the deposition temperature was as low as 415 °C. Moreover, large “process window” comparable to the process window at 580 °C, above 150 °C higher temperature and was widely used condition, was achieved even at 395°C by the optimization of the deposition condition.

scholarly journals Bulk Production of High-Purity Carbon Nanosphere by Combination of Chemical Vapor Deposition Methods

2014 ◽  
Vol 23 (8) ◽  
pp. 669-675 ◽  
Author(s):  
Ferial Ghaemi ◽  
Robiah Yunus ◽  
Mohamad Amran Mohd Salleh ◽  
Hong Ngee Lim ◽  
Suraya Abdul Rashid
Keyword(s):  
Chemical Vapor Deposition ◽  
Vapor Deposition ◽  
High Purity ◽  
Chemical Vapor ◽  
Bulk Production

High Quality GaAs Mis Diodes With Very Low Surface State Density

1990 ◽  
Vol 209 ◽  
Author(s):  
Yoshihisa Fujisaki ◽  
Sumiko Sakai ◽  
Saburo Ataka ◽  
Kenji Shibata
Keyword(s):  
Chemical Vapor Deposition ◽  
Density Of States ◽  
Vapor Deposition ◽  
Photoelectron Spectroscopy ◽  
Chemical Vapor ◽  
State Density ◽  
High Quality ◽  
Metal Insulator ◽  
X Ray ◽  
Mis Devices

ABSTRACTHigh quality GaAs/SiO2 MIS( Metal Insulator Semiconductor ) diodes were fabricated using (NH4)2S treatment and photo-assisted CVD( Chemical Vapor Deposition ). The density of states at the GaAs and SiO2 interface is the order of 1011 cm-2eV-1 throughout the forbidden energy range, which is smaller by the order of two than that of the MIS devices made by the conventional CVD process. The mechanism attributable to the interface improvement was investigated through XPS( X-ray Photoelectron Spectroscopy ) analyses.

Sign in / Sign up

Export Citation Format

Share Document