AbstractMulti-layer ultrathin polymer films have been deposited on the surfaces of nanoparticles of alumina using a plasma polymerization treatment. The nanoparticles ranged from 10-150 nm in spherical shapes. High-resolution transmission electron microscopy (HRTEM) experiments showed that an extremely thin film of the pyrrole layer (10-20 Å) was uniformly deposited on the surfaces of the nanoparticles. In particular, the particles of all sizes (10-150 nm) exhibited equally uniform ultrathin films indicating well-dispersed nanoparticles in the fluidized bed during the plasma treatment. After single layer coating, hexamethyldisiloxane (HMDSO) was coated again as a second layer onto the surface of pyrrole. Subsequently, a third layer of pyrrole was coated on the top of HMDSO film completing the multi-layer coating process. Time-of-Flight Secondary ion mass spectroscopy (TOFSIMS) experiments confirmed the deposition of these multi-layer thin films on the nanoparticles. The deposition mechanisms and the effects of plasma treatment parameters are discussed.
Uniform deposition of ultrathin polymer films on the surfaces of Al2O3 nanoparticles by a plasma treatment