Fatigue characteristics of SrBi2Ta2O9 thin films prepared by metalorganic decomposition

1998 ◽  
Vol 73 (6) ◽  
pp. 788-790 ◽  
Author(s):  
Z. G. Zhang ◽  
J. S. Liu ◽  
Y. N. Wang ◽  
J. S. Zhu ◽  
F. Yan ◽  
...  
Keyword(s):  
Thin Films ◽  
Fatigue Characteristics ◽  
Metalorganic Decomposition

Ferroelectric C-Axis Oriented Pb5Ge3O11 Thin Films for One Transistor Memory Application

1998 ◽  
Vol 541 ◽  
Author(s):  
Tingkai Li ◽  
Fengyan Zhang ◽  
Sheng Teng Hsu
Keyword(s):  
Thin Films ◽  
Ferroelectric Properties ◽  
Hysteresis Loops ◽  
Chemical Vapor ◽  
Dielectric Constants ◽  
Memory Devices ◽  
Leakage Currents ◽  
Fatigue Characteristics ◽  
Ferroelectric Memory ◽  
Memory Applications

AbstractOne transistor memory devices have been proposed recently. To meet the needs of one transistor memory applications, C-axis oriented Pb5Ge3O11 (PGO) thin films were prepared using metalorganic chemical vapor deposition (MOCVD) and rapid thermal processing (RTP). It was found that the nucleation of C-axis Pb5Ge3O11 phase started at a deposition temperature below 400°C and grain growth dominated at 500°C or above. With increasing annealing temperature, the remanent polarization (Pr) and coercive field (Ec) values increased, and the hysteresis loops of the Pb5Ge3O11 films were well saturated and symmetrical after the post-annealing. The C-axis PGO thin film showed good ferroelectric properties at 5V: 2Pr and 2Ec values were 2.0 - 4.0 µC/cm2 and 90 - 110 kV/cm, respectively. The films also showed excellent fatigue characteristics: no fatigue was observed up to 1 × 109 switching cycles. The retention and imprint properties have also been studied. The leakage currents of the PGO films were 2 - 5 × 10−7 A/cm2 at 100 kV/cm and dielectric constants were 40 - 70. The high quality MOCVD Pb5Ge3O11 films can be used for single transistor ferroelectric memory devices.

EFFECT OF GRAIN SIZE ON THE FERROELECTRIC PROPERTIES OF Bi3.25La0.75Ti3O12 Thin Films

2002 ◽  
Vol 16 (28n29) ◽  
pp. 4469-4474 ◽  
Author(s):  
KYOUNG-TAE KIM ◽  
CHANG-IL KIM ◽  
DONG-HEE KANG ◽  
IL-WUN SHIM
Keyword(s):  
Thin Films ◽  
Grain Size ◽  
Remanent Polarization ◽  
Ferroelectric Properties ◽  
Fatigue Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Current Densities ◽  
Metalorganic Decomposition ◽  
Small Grains

The Bi 3.25 La 0.75 Ti 3 O 12 (BLT) thin films were prepared by metalorganic decomposition method. The effect of grain size on the ferroelectric properties during crystallization were investigated by x-ray diffraction and field emission scanning electron microscope. The grain size and the roughness of BLT films increase with increasing of drying temperature. The leakage current densities of the BLT thin film with large grains are higher than that with small grains. The remanent polarization of BLT increase with increasing grain size. As compared BLT with small grain size, the BLT film with larger grain size shows better fatigue properties. This may be explained that small grained films shows more degradation of switching charge than large grained films.

Preparation of PZT/YBCO/YAIO Heterostructure Thin Films by KrF Excimer Laser Ablation

1998 ◽  
Vol 526 ◽  
Author(s):  
Kenji Ebihara ◽  
Hiromnitsu Kurogi ◽  
Yukihiko Yamagata ◽  
Tomoaki Ikegami ◽  
Alexander M. Grishin
Keyword(s):  
Thin Films ◽  
Laser Ablation ◽  
Excimer Laser ◽  
Ferroelectric Properties ◽  
Perovskite Oxide ◽  
Excimer Laser Ablation ◽  
Fatigue Characteristics ◽  
Krf Excimer Laser ◽  
Operation Frequency ◽  
Deposition Conditions

AbstractThe perovskite oxide YBa2Cu3O7-x (YBCO) and Pb(ZrxTi1-x)O3 (PZT) thin films have been deposited for superconducting-ferroelectric devices. KrF excimer laser ablation technique was used at the deposition conditions of 200-600mTorr O2, 2-3J/cm2 and 5-10 Hz operation frequency. Heterostructures of PZT-YBCO-YAlO3:Nd show the zero resistivity critical temperature of 82K and excellent ferroelectric properties of remnant polarization 32 μC/cm2, coercive force of 80kV/cm and dielectric constant 800. Cycling fatigue characteristics and leakage current are also discussed.

217 Fatigue Characteristics of Shape Memory Alloy Thin Films

2000 ◽  
Vol 005.1 (0) ◽  
pp. 73-74
Author(s):  
Koji OKANO ◽  
Tetsuya YAGI ◽  
Hitoshi TAKAGI ◽  
Hiroaki MISAWA ◽  
Shigeki MATSUO ◽  
...  
Keyword(s):  
Thin Films ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
Fatigue Characteristics

323 Fatigue Characteristics of Thin Films

2001 ◽  
Vol 2001.9 (0) ◽  
pp. 339-340
Author(s):  
Akihiro NAKAMURA ◽  
Koichi AKITA ◽  
Hiroshi MISAWA
Keyword(s):  
Thin Films ◽  
Fatigue Characteristics

Enhanced fatigue characteristics of sol–gel derived PZT thin films

2008 ◽  
Vol 449 (1-2) ◽  
pp. 32-35 ◽  
Author(s):  
Donghyun Shim ◽  
Jaemoon Pak ◽  
Kuangwoo Nam ◽  
Gwangweo Park
Keyword(s):  
Thin Films ◽  
Sol Gel ◽  
Pzt Thin Films ◽  
Fatigue Characteristics
Sign in / Sign up

Export Citation Format

Share Document