Analyzing Pump Energy through Hydraulic Modeling

2015 ◽  
Author(s):  
Ron Miller ◽  
Tracey Liberi ◽  
John Scioscia
Keyword(s):  
Pump Energy ◽  
Hydraulic Modeling

Application of GIS, Hydraulic and Hydrologic Modelling to Investigate the Changes of Flood Inundation Characteristics due to the Construction of Dams for different scenarios

2018 ◽  
Vol 1 (2) ◽  
pp. 61-77
Author(s):  
Hossameldin M. Elhanafy
Keyword(s):  
Fluid Mechanics ◽  
Flood Control ◽  
Reduction Rate ◽  
Hydraulic Modeling ◽  
Direct Result ◽  
Flood Inundation ◽  
High Ability ◽  
The West ◽  
Hydrologic Modelling ◽  
New Location

The novelty of the research project reported in this paper is the coupling of hydrological and hydraulic modeling which are based on the first principal of fluid mechanics for the simulation of flash floods at Wadi Elarish watershed to optimize the a new location of another dam rather than Elrawfa dam which already exist. Results show that, the optimum scenario is obtained by the construction of the west dam. As a direct result of this dam, the downstream inundated area can be reduced up to 15.7 % as function of reservoir available storage behind the dam. Furthermore, calculations showed that the reduction rate of inundated area for 50-year floods is largely more than 100-year floods, implies the high ability of west dam on flood control especially for floods with shorter return period.

scholarly journals Design and experimental demonstration of a high conversion efficiency OPCPA pre-amplifier for petawatt laser facility

2018 ◽  
Vol 6 ◽  
Author(s):  
Xiao Liang ◽  
Xinglong Xie ◽  
Jun Kang ◽  
Qingwei Yang ◽  
Hui Wei ◽  
...  
Keyword(s):  
Conversion Efficiency ◽  
Nonlinear Crystal ◽  
Beam Quality ◽  
Pump Energy ◽  
High Conversion ◽  
Signal Pulse ◽  
High Conversion Efficiency ◽  
Optical Parametric ◽  
Good Beam Quality ◽  
Laser Facility

We present the design and experiment of a broadband optical parametric chirped-pulse amplifier (OPCPA) which provides high conversion efficiency and good beam quality at 808 nm wavelength. Using a three-dimensional spatial and temporal numerical model, several design considerations necessary to achieve high conversion efficiency, good beam quality and good output stability are discussed. To improve the conversion efficiency and broaden the amplified signal bandwidth simultaneously, the nonlinear crystal length and OPCPA parameters are analyzed and optimized with the concept of dissipating amplified idler between optical parametric amplification (OPA) of two crystals configuration. In the experiment, an amplifier consisting of two OPCPA stages of ‘L’ type configuration was demonstrated by using the optimized parameters. An amplified signal energy of 160 mJ was achieved with a total pump-to-signal efficiency of 35% (43% efficiency for the OPCPA stage 2). The output bandwidth of signal pulse reached 80 nm and the signal pulse was compressed to 24 fs. The energy stability reached 1.67% RMS at 3% pump energy variation. The optimized OPCPA amplifier operates at a repetition rate of 1 Hz and is used as a front-end injection for the main amplifier of SG-II 5PW laser facility.

scholarly journals Nature-Inspired Structures Applied in Heat Transfer Enhancement and Drag Reduction

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 656
Author(s):  
Zhangyu Zhu ◽  
Juan Li ◽  
Hao Peng ◽  
Dongren Liu
Keyword(s):  
Heat Transfer ◽  
Drag Reduction ◽  
Heat Transfer Enhancement ◽  
Optimization Design ◽  
Pump Energy ◽  
Research Review ◽  
Transfer Enhancement ◽  
Nano Structure ◽  
Transfer Structure ◽  
Biomimetic Structures

Heat exchangers are general equipment for energy exchange in the industrial field. Enhancing the heat transfer of a heat exchanger with low pump energy consumption is beneficial to the maximum utilization of energy. The optimization design for enhanced heat transfer structure is an effective method to improve the heat transfer coefficient. Present research shows that the biomimetic structures applied in different equipment could enhance heat transfer and reduce flow resistance significantly. Firstly, six biomimetic structures including the fractal-tree-like structure, conical column structure, hybrid wetting structure, scale structure, concave-convex structure and superhydrophobic micro-nano structure were summarized in this paper. The biomimetic structure characteristics and heat transfer enhancement and drag reduction mechanisms were analyzed. Secondly, four processing methods including photolithography, nanoimprinting, femtosecond laser processing and 3D printing were introduced as the reference of biomimetic structure machining. Finally, according to the systemic summary of the research review, the prospect of biomimetic heat transfer structure optimization was proposed.

Demonstration of a piston type integrated high pressure pump-energy recovery device for reverse osmosis desalination system

Desalination ◽  
2021 ◽  
Vol 507 ◽  
pp. 115033
Author(s):  
Daiwang Song ◽  
Yin Zhang ◽  
Haitao Wang ◽  
Lidong Jiang ◽  
Chengpeng Wang ◽  
...  
Keyword(s):  
High Pressure ◽  
Reverse Osmosis ◽  
Energy Recovery ◽  
Pump Energy ◽  
High Pressure Pump ◽  
Pressure Pump ◽  
Reverse Osmosis Desalination

Evaluation the effect of the ambient temperature on the liquid petroleum gas transportation pipeline

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ammar Ali Abd ◽  
Samah Zaki Naji ◽  
Ching Thian Tye ◽  
Mohd Roslee Othman
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gases ◽  
Ambient Temperature ◽  
Phase Change ◽  
Liquid State ◽  
Pump Energy ◽  
Compressible Liquid ◽  
Liquefied Petroleum Gas ◽  
Efficient Design ◽  
The Impact

Abstract Liquefied petroleum gas (LPG) plays a major role in worldwide energy consumption as a clean source of energy with low greenhouse gases emission. LPG transportation is exhibited through networks of pipelines, maritime, and tracks. LPG transmission using pipeline is environmentally friendly owing to the low greenhouse gases emission and low energy requirements. This work is a comprehensive evaluation of transportation petroleum gas in liquid state and compressible liquid state concerning LPG density, temperature and pressure, flow velocity, and pump energy consumption under the impact of different ambient temperatures. Inevitably, the pipeline surface exchanges heat between LPG and surrounding soil owing to the temperature difference and change in elevation. To prevent phase change, it is important to pay attention for several parameters such as ambient temperature, thermal conductivity of pipeline materials, soil type, and change in elevation for safe, reliable, and economic transportation. Transporting LPG at high pressure requests smaller pipeline size and consumes less energy for pumps due to its higher density. Also, LPG transportation under moderate or low pressure is more likely exposed to phase change, thus more thermal insulation and pressure boosting stations required to maintain the phase envelope. The models developed in this work aim to advance the existing knowledge and serve as a guide for efficient design by underling the importance of the mentioned parameters.

Pump energy absorption in a ruby rod

1965 ◽  
Vol 16 (1) ◽  
pp. 68-68 ◽  
Author(s):  
G. Lampis ◽  
C. A. Sacchi ◽  
O. Svelto
Keyword(s):  
Energy Absorption ◽  
Pump Energy

The Na+K+-pump, energy metabolism, and obesity

1982 ◽  
Vol 104 (2) ◽  
pp. 357-362 ◽  
Author(s):  
Torben Clausen ◽  
Otto Hansen
Keyword(s):  
Energy Metabolism ◽  
Pump Energy
Sign in / Sign up

Export Citation Format

Share Document