CuO thin films thermal conductivity and interfacial thermal resistance estimation

2006 ◽  
Vol 35 (1) ◽  
pp. 17-27 ◽  
Author(s):  
A. Kusiak ◽  
J.-L. Battaglia ◽  
S. Gomez ◽  
J.-P. Manaud ◽  
Y. Lepetitcorps
Keyword(s):  
Thin Films ◽  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Interfacial Thermal Resistance

Thermal Properties of Thin Films

1992 ◽  
Vol 284 ◽  
Author(s):  
J. C. Lambropoulos ◽  
S.-S. Hwang
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Resistance ◽  
Interfacial Thermal Resistance ◽  
Bulk Solid ◽  
Ceramic Films ◽  
Film Substrate ◽  
Conductivity Of Thin Films

ABSTRACTWe summarize various measurements of the thermal conductivity of thin ceramic films which show that the thermal conductivity of thin films with thickness in the micron and sub-micron range may be up to two orders of magnitude lower than the thermal conductivityof the corresponding bulk solid. The reduction in the thin film effective thermal conductivity is attributed to the interfacial thermal resistance across the film/substrate interface.

scholarly journals Thermal Conductivity of Unidirectionally Aligned SiC Whisker Reinforced Al Alloy Matrix Composite with Interfacial Thermal Resistance

2005 ◽  
Vol 46 (2) ◽  
pp. 148-151 ◽  
Author(s):  
Yibin Xu ◽  
Yoshihisa Tanaka ◽  
Masaharu Murata ◽  
Kazushige Kamihira ◽  
Yukihiro Isoda ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Matrix Composite ◽  
Interfacial Thermal Resistance ◽  
Al Alloy ◽  
Alloy Matrix

Enhanced Thermal Conductivity of Composite Materials by Filling Sheet and Fiber Under Effect of Filler Contact

2021 ◽  
Author(s):  
Xiao-jian Wang ◽  
Liang-Bi Wang
Keyword(s):  
Thermal Conductivity ◽  
Heat Flux ◽  
Composite Materials ◽  
Thermal Resistance ◽  
Percolation Threshold ◽  
Filler Content ◽  
Interfacial Thermal Resistance ◽  
Combined Effects ◽  
Enhanced Thermal Conductivity ◽  
The Ideal

Abstract The most common non-granular fillers are sheet and fiber. When they are distributed along the heat flux direction, the thermal conductivity of composite increases greatly. Meanwhile, the filler contact also has large effect on the thermal conductivity. However, the effect of filler contact on the thermal conductivity of composite with directional fillers has not been investigated. In this paper, the combined effects of filler contact, content and orientation are investigated. The results show that the effect of filler orientation on the thermal conductivity is greater than filler contact in low filler content, and exact opposite in high filler content. The effect of filler contact on fibrous and sheet fillers is far greater than cube and sphere fillers. This rule is affected by the filler contact. The filler content of 8% is the ideal percolation threshold of composite with fibrous and sheet filler. It is lower than cube filler and previous reports. The space for thermal conductivity growth of composite with directional filler is still very large. The effect of interfacial thermal resistance should be considered in predicting the thermal conductivity of composite under high Rc (>10-4).

Effective Thermal Conductivity of Functionally Graded Particulate Nanocomposites With Interfacial Thermal Resistance

2008 ◽  
Vol 75 (5) ◽  
Author(s):  
H. M. Yin ◽  
G. H. Paulino ◽  
W. G. Buttlar ◽  
L. Z. Sun
Keyword(s):  
Thermal Conductivity ◽  
Thermal Resistance ◽  
Effective Thermal Conductivity ◽  
Functionally Graded ◽  
Interfacial Thermal Resistance ◽  
Conductivity Distribution ◽  
Consistent Model ◽  
The Matrix ◽  
Graded Material ◽  
Perfect Interface

By means of a fundamental solution for a single inhomogeneity embedded in a functionally graded material matrix, a self-consistent model is proposed to investigate the effective thermal conductivity distribution in a functionally graded particulate nanocomposite. The “Kapitza thermal resistance” along the interface between a particle and the matrix is simulated with a perfect interface but a lower thermal conductivity of the particle. The results indicate that the effective thermal conductivity distribution greatly depends on Kapitza thermal resistance, particle size, and degree of material gradient.

Thermal conductivity and interfacial Thermal Resistance Behavior for the Polyaniline (C3N)– boron carbide (BC3) Heterostructure

2021 ◽  
Author(s):  
Arian Mayelifartash ◽  
Mohammad Ali Abdol ◽  
Sadegh Sadeghzadeh
Keyword(s):  
Thermal Conductivity ◽  
Molecular Dynamics ◽  
Thermal Resistance ◽  
Boron Carbide ◽  
Molecular Dynamics Simulations ◽  
Thermal Conductance ◽  
Interfacial Thermal Resistance ◽  
Non Equilibrium Molecular Dynamics ◽  
Dynamics Simulations ◽  
Non Equilibrium

In this paper, by employing non-equilibrium molecular dynamics simulations (NEMD), the thermal conductance of hybrid formed by polyaniline (C3N) and boron carbide (BC3) in both armchair and zigzag configurations has...

Sign in / Sign up

Export Citation Format

Share Document