scholarly journals On articulated plates with micro-slits to tackle low-frequency noise

Acta Acustica ◽  
2021 ◽  
Vol 5 ◽  
pp. 31
Author(s):  
Massimo Emiliano D’Elia ◽  
Thomas Humbert ◽  
Yves Aurégan
Keyword(s):  
Low Frequency ◽  
Normal Incidence ◽  
Frequency Noise ◽  
Correct Identification ◽  
Low Frequency Noise ◽  
Perfect Absorption ◽  
Flow Measurements ◽  
Low Frequencies ◽  
Acoustic Liner ◽  
Acoustic Treatment

In recent years, new concepts of acoustic absorbers dedicated to the reduction of low-frequency noise have been developed. Among them, liners with moving parts, such as membrane-based liners, have been an object of particular interest. In the present paper, we propose a liner concept based on a cantilever beam made of articulated plates with micro-slits. Compared to membrane technologies, these micro-slits introduce a small leakage from the backing cavity that reduces the high compressibility effects occurring at very low frequencies in a small cavity. An acoustic liner including an ensemble of such articulated plates has been fabricated and characterized for grazing acoustic incidence in absence and in presence of flow. Measurements in an impedance tube at normal incidence have also been performed, and perfect absorption is obtained at a frequency where the liner thickness corresponds to 1/16th of the acoustic wavelength. A new and simple model is proposed to predict the attenuation of this type of acoustic treatment. The results are in good agreement with the measurements, indicating a correct identification of the physical phenomena here at stake.

Low Frequency Noise Annoyance Assessment by Low Frequency Noise Rating (LFNR) Curves

1983 ◽  
Vol 2 (1) ◽  
pp. 20-28 ◽  
Author(s):  
N. Broner ◽  
H.G. Leventhall
Keyword(s):  
Laboratory Experiments ◽  
Low Frequency ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Noise Annoyance

Over recent years, it has become apparent that low frequency noise annoyance is more widespread than originally believed. Annoyance has occurred where the emitted noise is unbalanced towards the low frequencies even though the dB(A) level has been low. Following laboratory experiments carried out as part of an investigation into low frequency annoyance, combined with field annoyance data, the Low Frequency Noise Rating (LFNR) curves are proposed for the assessment of low frequency noise annoyance complaints.

Low-frequency noise control using layered granular aerogel and limp porous media

2021 ◽  
Vol 263 (4) ◽  
pp. 2724-2729
Author(s):  
Yutong Xue ◽  
Amrutha Dasyam ◽  
J. Stuart Bolton ◽  
Bhisham Sharma
Keyword(s):  
Noise Control ◽  
Glass Fibers ◽  
Low Frequency ◽  
Normal Incidence ◽  
Frequency Noise ◽  
Fibrous Materials ◽  
Low Frequency Noise ◽  
Frequency Range ◽  
Fibrous Media ◽  
Impedance Tube Method

The acoustic absorption of granular aerogel layers with a granule sizes in the range of 2 to 40 μm is dominated by narrow-banded, high absorption regions in the low-frequency range and by reduced absorption values at higher frequencies. In this paper, we investigate the possibility of developing new, low-frequency noise reduction materials by layering granular aerogels with traditional porous sound absorbing materials such as glass fibers. The acoustic behavior of the layered configurations is predicted using the arbitrary coefficient method, wherein the granular aerogel layers are modeled as an equivalent poro-elastic material while the fibrous media and membrane are modeled as limp media. The analytical predictions are verified using experimental measurements conducted using the normal incidence, two-microphone impedance tube method. Our results show that layered configurations including granular aerogels, fibrous materials, and limp membranes provide enhanced sound absorption properties that can be tuned for specific noise control applications over a broad frequency range.

Low Frequency Absorption of Additively Manufactured Cylinders

2019 ◽  
Author(s):  
Sophie R. Kaye ◽  
Ethan D. Casavant ◽  
Paul E. Slaboch
Keyword(s):  
Low Frequency ◽  
Normal Incidence ◽  
Frequency Noise ◽  
Outer Diameter ◽  
Acoustic Absorption ◽  
Frequency Range ◽  
Large Space ◽  
Low Frequencies ◽  
Cylinder Length ◽  
Hollow Cylinders

Abstract Attenuating low frequencies is often problematic, due to the large space required for common absorptive materials to mitigate such noise. However, natural hollow reeds are known to effectively attenuate low frequencies while occupying relatively little space compared to traditional absorptive materials. This paper discusses the effect of varied outer diameter, and outer spacing on the 200–1600 Hz acoustic absorption of additively manufactured arrays of hollow cylinders. Samples were tested in a 10 cm diameter normal incidence impedance tube such that cylinder length was oriented perpendicular to the incoming plane wave. By varying only one geometric element of each array, the absorption due to any particular parameter can be assessed individually. The tests confirmed the hypothesis that minimizing cylinder spacing and maximizing cylinder diameter resulted in increased overall absorption and produced more focused absorption peaks at specific low frequencies. Wider cylinder spacing produced a broader absorptive frequency range, despite shifting upward in frequency. Thus, manipulating these variables can specifically target absorption for low frequency noise that would otherwise disturb listeners.

scholarly journals Factors influencing low-frequency noise reduction in typical Chinese dwelling layouts

2020 ◽  
pp. 146134842094297
Author(s):  
Yang Song ◽  
Jian Kang
Keyword(s):  
Noise Reduction ◽  
Noise Exposure ◽  
Noise Source ◽  
Low Frequency ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Factors Influencing ◽  
Polyline Distance

Existing approaches to reducing the low-frequency noise exposure of dwellings are not always sufficient. This study investigated the significance of dwelling layout design for low-frequency noise control. The sound distribution in six typical Chinese dwelling layouts was analysed using in-situ measurements under steady-state noise of various low frequencies. The results showed that among two-bedroom dwelling layouts, the overall average noise reduction varied considerably (6 dB). The noise reduction for room levels (number of rooms sound crosses) 1–2 and 2–3 varies by 5 and 3 dB, respectively, and the noise reduction at door openings varies by 5 dB. A model to approximate the low-frequency noise reduction of a layout was developed using the polyline distance from the noise source and the number of walls the polyline has to cross, which were clearly shown to influence low-frequency noise reduction and seem to be the strongest investigated factors.

Attenuation of Earmuffs against Low Frequency Noise

1987 ◽  
Vol 6 (4) ◽  
pp. 167-174 ◽  
Author(s):  
Jukka Starck ◽  
Jussi Pekkarinen ◽  
Seppo Aatola
Keyword(s):  
Low Frequency ◽  
Peak Level ◽  
Standard Test ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Hearing Protectors ◽  
Noise Measurements ◽  
Attenuation Values ◽  
Very High

The standard test for hearing protectors cannot be applied to determine the attenuation values for low frequency noise or for noise consisting of high intensity impulses. Moreover, the aging of earmuffs and the use of spectacles may cause leakage which decreases attenuation mainly at low frequencies. To study the real attenuation of earmuffs, noise measurements were taken outside and inside the earmuffs of workers at industrial work places, and of military conscripts when shooting with different firearms. The effect of spectacles on the attenuation was measured under laboratory conditions. In industrial workplaces the average attenuation was 4 dB in the 63 and 125 Hz octave bands. For shooting noise the attenuation was found to be good for small calibre weapons but poor for large calibre weapons, which generate very high peak level impulses at low frequencies. Spectacles decreased earmuff attenuation by 9–11 dB.

Low-frequency noise correlations in lateral pnp bipolar transistors

1992 ◽  
Vol 70 (10-11) ◽  
pp. 1112-1117
Author(s):  
A. Nathan ◽  
E. Charbon ◽  
W. Kung ◽  
A. Salim
Keyword(s):  
Integrated Circuit ◽  
Low Frequency ◽  
Intrinsic Noise ◽  
Low Noise ◽  
Bipolar Transistors ◽  
Current Gain ◽  
Low Noise Amplifiers ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies

Measurement results of low-frequency noise behaviour, and in particular, the noise correlations in lateral pnp bipolar transistors are presented for various bias conditions in both forward active and saturation regimes. The correlation in output collector noise is very high with a value close to unity only when the device is in medium injection. At extremely high injection, the degree of coherence degrades, depicting a behaviour similar to the forward current gain of the device. This degradation can be attributed to emitter-crowding effects. The correlation in output noise can be exploited to drastically suppress the intrinsic noise, particularly at low frequencies, making such devices useful for the input stage of amplifiers; the first step towards realisation of ultra low-noise amplifiers in standard integrated circuit technology.

Noise induced hearing loss in low frequencies in employees in a hospital microbiology department

2021 ◽  
Vol 7 (5) ◽  
pp. 861
Author(s):  
Konstantina Chrysouli ◽  
Dimitrios Kikidis
Keyword(s):  
Hearing Loss ◽  
Low Frequency ◽  
Control Group ◽  
Frequency Noise ◽  
Noise Induced Hearing Loss ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
History Of ◽  
Laboratory Workers ◽  
The Impact

<p class="abstract">Noise induced hearing loss (NIHL) is regarded as a serious problem and one of the most recorded occupational disorders in Europe and in the rest of the world and amounts to between 7% and 21% of the hearing loss. Aim of this study is to explore the development and the prevalence of low frequency noise-induced hearing loss (NIHL) in a hospital, especially in microbiology laboratory workers. Generally it is known that 4 KHz is the main NIHL frequency. Despite current theories, our study suggests for the first time the impact of low frequency noise in hearing loss among laboratory workers. According to the results, the population examined, namely the employees at the Microbiology Department of the Hospital, showed lower hearing levels compared to the control group, who had no history of occupational exposure to noise. There are many other studies which suggest that prolonged exposures to high noise levels have negative physiological and psychological effects on workers. The finding of the correlation of noise frequency with the frequency of the generated hearing loss is involved in the controversy about the pathophysiology of noise effect.</p>

Broadband low-frequency noise reduction using Helmholtz resonator-based metamaterial

2021 ◽  
Vol 69 (4) ◽  
pp. 351-363
Author(s):  
Jhalu Gorain ◽  
Chandramouli Padmanabhan
Keyword(s):  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Broadband Noise ◽  
Unit Cell ◽  
Frequency Noise ◽  
Noise Attenuation ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Pu Foam

Achieving broadband noise attenuation at low frequencies is still a significant challenge. Helmholtz resonators offer good low-frequency noise attenuation but are effective only over a narrow band; the cavity volume required at these frequencies is also larger. This article proposes a new broadband acoustic metamaterial (AMM) absorber, which uses polyurethane (PU) foam embedded with small-size resonators tuned to different frequencies. The AMM design is achieved in three phases: (1) develop a transfer-matrix-based one-dimensionalmodel for a resonator with intruded neck; (2) use this model to develop a novel band broadeningmethod, to select appropriate resonators tuned to different frequencies; and (3) construct a unit cell metamaterial embedded with an array of resonators into PU foam. A small-size resonator tuned to 415 Hz is modified, by varying the intrusion lengths of the neck, to achieve natural frequencies ranging from 210 to 415 Hz. Using the band broadening methodology, 1 unit cell metamaterial is constructed; its effectiveness is demonstrated by testing in an acoustic impedance tube. The broadband attenuation characteristics of the constructed unit cell metamaterial are shown to match well with the predicted results. To demonstrate further the effectiveness of the idea, a metamaterial is formed using 4 periodic unit cells and is tested in a twin room reverberation chamber. The transmission loss is shown to improve significantly, at low frequencies, due to the inclusion of the resonators.

Low-Frequency Acoustic Absorption of 3D Printed Cylinders

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Paul E. Slaboch ◽  
Sophie Kaye ◽  
Ethan Casavant
Keyword(s):  
Low Frequency ◽  
Normal Incidence ◽  
Frequency Noise ◽  
Outer Diameter ◽  
Acoustic Absorption ◽  
Large Space ◽  
Low Frequencies ◽  
Cylinder Length ◽  
3D Printed ◽  
Hollow Cylinders

Abstract Attenuating low-frequency sound is often problematic, due to the large space required for common absorptive materials to mitigate such noise. However, natural hollow reeds are known to effectively attenuate low frequencies while occupying relatively little space compared to traditional absorptive materials. The present study determines the effect of varied outer diameter and outer spacing on the 200–1600 Hz acoustic absorption of 3D printed arrays of hollow cylinders. Samples were tested in a 100-mm diameter normal incidence impedance tube such that cylinder length was oriented perpendicular to the incoming plane wave. By varying only one geometric element of each array, the absorption due to any parameter can be assessed individually. It was found that minimizing cylinder spacing and maximizing cylinder diameter resulted in increased overall absorption and produced more focused absorption peaks at specific low frequencies. Wider cylinder spacing produced a broader absorptive frequency range, despite shifting upward in frequency. Thus, manipulating these variables can specifically target absorption for low-frequency noise that would otherwise disturb listeners.

Low Frequency Noise Behavior in Semiconductors

1997 ◽  
Vol 11 (20) ◽  
pp. 899-907
Author(s):  
S. V. Melkonyan ◽  
F. V. Gasparyan ◽  
V. M. Aroutiunyan
Keyword(s):  
Spectral Density ◽  
Characteristic Frequency ◽  
Low Frequency ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Frequency Behavior

The low frequency behavior of the generation-recombination noise in the homogeneous semiconductors is investigated. The form of Lorentz law for spectral density of noise at low frequencies is made more precise. It is shown that at superlow frequencies the spectrum of generation-recombination noise changes into the 1/f-law. The characteristic frequency of this change depends on the temperature and dimensions of the sample.

Sign in / Sign up

Export Citation Format

Share Document