scholarly journals Performance enhanced Metal‐Semiconductor‐Metal photodetector based on double‐layer ZnO nanorods

2021 ◽  
Author(s):  
Lingling Chu ◽  
Chao Xu ◽  
Bo Feng ◽  
Chao Nie ◽  
Yunxue Hu
Keyword(s):  
Double Layer ◽  
Zno Nanorods ◽  
Metal Semiconductor Metal

scholarly journals Enhanced Ultraviolet Photodetector Based on Mg-Doped ZnO Nanorods Films

2019 ◽  
Vol 29 (3) ◽  
pp. 158 ◽  
Author(s):  
Hussein Abdullah Hameed
Keyword(s):  
Uv Light ◽  
Zno Nanorods ◽  
Optical Absorption Spectroscopy ◽  
Near Band Edge ◽  
X Ray Diffraction ◽  
X Ray ◽  
Glass Substrates ◽  
Metal Semiconductor Metal ◽  
Doped Zno ◽  
Mg Doped

Magnesium-doped zinc oxide (ZnO: Mg) nanorods and nanotubes films were prepared by hydrothermal method deposited on glass substrates. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), photoluminescence (PL), and optical absorption spectroscopy (UV) were performed to characterize the prepared films. X-ray diffraction analysis showed a decrease in the lattice parameters of Mg doped ZnO NRs. The Photoluminescence of the undoped and Mg-doped ZnO NRs displayed a near band edge. At 10 V bias, the metal-semiconductor-metal (MSM) ultraviolet (UV) photodetector performance of the Mg-doped ZnO prepared for various Mg concentrations of 0.0, 0.02, and 0.06 was investigated under radiation of 40μW/cm2 at the wavelengths of 365 and 385 nm UV light. The responsivity, detectivity and quantum efficiency of Mg-doped based on MSM detector were 0.118A/W, 1.0579*1012 and 40.05157 under UV of wavelength 365nm respectively.

CHARACTERIZATION OF AN AlGaAs/GaAs METAL-SEMICONDUCTOR-METAL PHOTODETECTOR

1988 ◽  
Vol 49 (C4) ◽  
pp. C4-325-C4-328
Author(s):  
M. ZIRNGIBL ◽  
R. SACHOT ◽  
M. ILEGEMS
Keyword(s):  
Metal Semiconductor Metal

Cracking at the fold in double layer coated paper: the influence of latex and starch composition

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 93-99
Author(s):  
SEYYED MOHAMMAD HASHEMI NAJAFI ◽  
DOUGLAS BOUSFIELD, ◽  
MEHDI TAJVIDI
Keyword(s):  
Mechanical Properties ◽  
Double Layer ◽  
Starch Content ◽  
Single Layer ◽  
Double Layers ◽  
Coated Paper ◽  
Coated Papers ◽  
Coating Layers ◽  
Scanned Images ◽  
Packaging Paper

Cracking at the fold of publication and packaging paper grades is a serious problem that can lead to rejection of product. Recent work has revealed some basic mechanisms and the influence of various parameters on the extent of crack area, but no studies are reported using coating layers with known mechanical properties, especially for double-coated systems. In this study, coating layers with different and known mechanical properties were used to characterize crack formation during folding. The coating formulations were applied on two different basis weight papers, and the coated papers were folded. The binder systems in these formulations were different combinations of a styrene-butadiene latex and mixtures of latex and starch for two different pigment volume concentrations (PVC). Both types of papers were coated with single and double layers. The folded area was scanned with a high-resolution scanner while the samples were kept at their folded angle. The scanned images were analyzed within a constant area. The crack areas were reported for different types of papers, binder system and PVC values. As PVC, starch content, and paper basis weight increased, the crack area increased. Double layer coated papers with high PVC and high starch content at the top layer had more cracks in comparison with a single layer coated paper, but when the PVC of the top layer was low, cracking area decreased. No measurable cracking was observed when the top layer was formulated with a 100% latex layer.

A Survey on Crypto-Steganographic Schemes and A Use Case in Healthcare System

2019 ◽  
Vol 1 (2) ◽  
pp. 25-33
Author(s):  
Mei Ling Phang ◽  
Swee Huay Heng
Keyword(s):  
Social Networking ◽  
Information Sharing ◽  
Healthcare System ◽  
Double Layer ◽  
21St Century ◽  
Electronic Devices ◽  
Third Party ◽  
Use Case ◽  
Comparison Analysis ◽  
Information Assets

Information sharing has become prevalent due to the expansion of social networking in this 21st century. However, electronic devices are vulnerable to various kinds of attacks. Information might be disclosed, modified and accessed by an unauthorised third party which consequently leads to the breach of confidentiality, integrity and availability of the information. Therefore, it is of utmost importance to employ the technology of cryptography and steganography to protect information assets. Cryptography and steganography have weaknesses when they are working alone. Therefore, crypto-steganography, the combination of cryptography and steganography are introduced to overcome the weaknesses in order to provide a double layer of security and protection. This paper provides a general overview of steganography and cryptography as well as a comparison analysis of different crypto-steganographic schemes. A secure crypto-steganographic system for healthcare is then developed with the implementation and integration of the secure crypto-steganographic scheme proposed by Juneja and Sandhu. This healthcare system enables users to store and deliver message in a more secure way while achieving the main goals of both cryptography and steganography.

Electrode for Electric Double Layer Capacitor Made of Carbonized and Activated Cotton Cloth

2014 ◽  
Vol 134 (5) ◽  
pp. 360-361
Author(s):  
Masumi Fukuma ◽  
Takayuki Uchida ◽  
Yukito Fukushima ◽  
Jinichi Ogawa ◽  
Katsumi Yoshino
Keyword(s):  
Double Layer ◽  
Electric Double Layer ◽  
Cotton Cloth ◽  
Electric Double Layer Capacitor ◽  
Double Layer Capacitor
Sign in / Sign up

Export Citation Format

Share Document