scholarly journals Setting the boundaries: Primary cell wall synthesis and expansion

2011 ◽  
Vol 33 (2) ◽  
pp. 14-19
Author(s):  
Stephen C. Fry ◽  
Lenka Franková ◽  
Dimitra Chormova
Keyword(s):  
Cell Wall ◽  
Secondary Wall ◽  
Plant Cells ◽  
Wall Layer ◽  
Maximum Amount ◽  
Primary Cell Wall ◽  
Primary Wall ◽  
Cell Wall Synthesis ◽  
Outer Primary ◽  
Shape And Size

Mature plant cells typically have two-layered walls: a first-formed thin outer primary wall layer enclosing a later-formed thick inner secondary wall. The surface area of the primary wall limits the size of the cell and thus the maximum amount of biomass that can potentially be accumulated in the secondary wall. By controlling the shape and size of the cell, the primary wall therefore imposes the limits on the amount of inedible biofuel a plant cell can make.

Cell wall structures of Epicoccum nigrum (Hyphomycetes)

1973 ◽  
Vol 51 (5) ◽  
pp. 1071-1073 ◽  
Author(s):  
J. A. Brushaber ◽  
R. H. Haskins
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Outer Layer ◽  
Secondary Wall ◽  
Outer Wall ◽  
Wall Layer ◽  
Wall Material ◽  
Primary Wall ◽  
Electron Dense Material ◽  
Wall Structures

Two structurally distinct types of secondary wall layers are present in older hyphae in addition to the primary wall. A coarsely fibrous outer wall layer often becomes quite massive and frequently fuses with the outer wall layers of adjacent cells in the formation of hyphal strands. The uneven deposition of this outer layer often produces large verrucosities. The inner secondary wall layer is relatively electron transparent and contains a reticulum of electron-dense lines. The interface of the inner secondary wall with the cytoplasm is often very irregular, and sections of the plasma membrane are frequently overlain by wall material. The outer secondary wall of conidia is composed of an electron-dense material different from that of the outer wall of hyphae. Cells in the multicellular conidia tend to be polyhedral in shape with either very thick primary walls or thin primary walls having a thick inner wall deposit.

An ultrastructural study of acid phosphatase localization in Phaseolus vulgaris xylem by the use of an azo-dye method

1975 ◽  
Vol 19 (3) ◽  
pp. 543-561
Author(s):  
I. Charvat ◽  
K. Esau
Keyword(s):  
Acid Phosphatase ◽  
Phaseolus Vulgaris ◽  
Azo Dye ◽  
Secondary Wall ◽  
Parenchyma Cell ◽  
Middle Lamella ◽  
Primary Cell Wall ◽  
Vessel Element ◽  
Primary Wall ◽  
Final Reaction

The localization of acid phosphatase during xylem development has been examined in the bean, Phaseolus vulgaris. The azo dye, the final reaction product, is initially prominent in the dictyosomes, vesicles apparently participating in secondary wall formation, and in the middle lamella of the young vessel element. Final reaction particles are also present in mitochondria, chloroplasts, and certain vacuoles and are sparsely scattered in the cytoplasm. At a later stage of vessel differentiation, the azo dye is concentrated in the disintegrating cytoplasm and along the fibrils of the partially hydrolysed primary wall and middle lamella. In the mature vessel element, the azo dye is still present along the disintegrated primary wall at the side of the vessel and covers the secondary wall. In the parenchyma cell adjacent to the vessel element, acid phosphatase localization is found in the dictyosomes, endoplasmic reticulum, mitochondria, small vacuoles, and the middle lamella. The controls from all stages of vessel element development were free of azo dye particles. The concentration of acid phosphatase along the secondary walls of the mature vessels and in the middle lamella between other cells indicates that this enzyme has other functions besides autolysis of the cytoplasm and primary cell wall. Acid phosphatase may participate in the formation of the secondary wall and may also have a role in the secretion and transport of sugars.

scholarly journals Structure and Biomechanics during Xylem Vessel Transdifferentiation in Arabidopsis thaliana

Plants ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1715
Author(s):  
Eleftheria Roumeli ◽  
Leah Ginsberg ◽  
Robin McDonald ◽  
Giada Spigolon ◽  
Rodinde Hendrickx ◽  
...  
Keyword(s):  
Arabidopsis Thaliana ◽  
Cell Wall ◽  
Cell Walls ◽  
Turgor Pressure ◽  
Plant Cells ◽  
Building Blocks ◽  
Xylem Vessel ◽  
Primary Cell Wall ◽  
Individual Plant ◽  
Vessel Elements

Individual plant cells are the building blocks for all plantae and artificially constructed plant biomaterials, like biocomposites. Secondary cell walls (SCWs) are a key component for mediating mechanical strength and stiffness in both living vascular plants and biocomposite materials. In this paper, we study the structure and biomechanics of cultured plant cells during the cellular developmental stages associated with SCW formation. We use a model culture system that induces transdifferentiation of Arabidopsis thaliana cells to xylem vessel elements, upon treatment with dexamethasone (DEX). We group the transdifferentiation process into three distinct stages, based on morphological observations of the cell walls. The first stage includes cells with only a primary cell wall (PCW), the second covers cells that have formed a SCW, and the third stage includes cells with a ruptured tonoplast and partially or fully degraded PCW. We adopt a multi-scale approach to study the mechanical properties of cells in these three stages. We perform large-scale indentations with a micro-compression system in three different osmotic conditions. Atomic force microscopy (AFM) nanoscale indentations in water allow us to isolate the cell wall response. We propose a spring-based model to deconvolve the competing stiffness contributions from turgor pressure, PCW, SCW and cytoplasm in the stiffness of differentiating cells. Prior to triggering differentiation, cells in hypotonic pressure conditions are significantly stiffer than cells in isotonic or hypertonic conditions, highlighting the dominant role of turgor pressure. Plasmolyzed cells with a SCW reach similar levels of stiffness as cells with maximum turgor pressure. The stiffness of the PCW in all of these conditions is lower than the stiffness of the fully-formed SCW. Our results provide the first experimental characterization of the mechanics of SCW formation at single cell level.

scholarly journals Primary cell wall inspired micro containers as a step towards a synthetic plant cell

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
T. Paulraj ◽  
S. Wennmalm ◽  
D.C.F. Wieland ◽  
A. V. Riazanova ◽  
A. Dėdinaitė ◽  
...  
Keyword(s):  
Cell Wall ◽  
Plant Cell ◽  
Plant Cell Wall ◽  
Structural Integrity ◽  
Plant Cells ◽  
Lipid Vesicles ◽  
Primary Cell Wall ◽  
Living Plant ◽  
A Cell ◽  
Lipid Tubules

AbstractThe structural integrity of living plant cells heavily relies on the plant cell wall containing a nanofibrous cellulose skeleton. Hence, if synthetic plant cells consist of such a cell wall, they would allow for manipulation into more complex synthetic plant structures. Herein, we have overcome the fundamental difficulties associated with assembling lipid vesicles with cellulosic nanofibers (CNFs). We prepare plantosomes with an outer shell of CNF and pectin, and beneath this, a thin layer of lipids (oleic acid and phospholipids) that surrounds a water core. By exploiting the phase behavior of the lipids, regulated by pH and Mg2+ ions, we form vesicle-crowded interiors that change the outer dimension of the plantosomes, mimicking the expansion in real plant cells during, e.g., growth. The internal pressure enables growth of lipid tubules through the plantosome cell wall, which paves the way to the development of hierarchical plant structures and advanced synthetic plant cell mimics.

scholarly journals The Nature of Reaction Wood III. Cell Division and Cell Wall Formation in Conifer Stems

1952 ◽  
Vol 5 (4) ◽  
pp. 385 ◽  
Author(s):  
ABW Ardrop ◽  
HE Dadswell
Keyword(s):  
Cell Wall ◽  
Cell Division ◽  
Secondary Wall ◽  
Compression Wood ◽  
Normal Wood ◽  
Reaction Wood ◽  
Primary Wall ◽  
Wall Formation ◽  
Tracheid Length ◽  
Secondary Wall Formation

Cell division, the nature of extra-cambial readjustment, and the development of the secondary wall in the tracheids of conifer stems have been investigated in both compression wood and normal wood. It has been shown that the reduction in tracheid length, accompanying the development of compression wood and, in normal wood, increased radial growth after suppression, result from an increase in the number of anticlinal divisions in the cambium. From observations of bifurcated and otherwise distorted cell tips in mature tracheids, of small but distinct terminal canals connecting the lumen to the primary wall in the tips of mature tracheids, and of the presence of only primary wall at the tips of partly differentiated tracheids, and from the failure to observe remnants of the parent primary walls at the ends of differentiating tracheids, it has been concluded that extra-cambial readjustment of developing cells proceeds by tip or intrusive growth. It has been further concluded that the development of the secondary wall is progressive towards the cell tips, on the bases of direct observation of secondary wall formation in developing tracheids and of the increase found in the number of turns of the micellar helix per cell with increasing cell length. The significance of this in relation to the submicroscopic organization of the cell wall has been discussed. Results of X-ray examinations and of measurements of� tracheid length in successive narrow tangential zones from the cambium into the xylem have indicated that secondary wall formation begins before the dimensional changes of differentiation are complete.

In situ detection of laccase activity and immunolocalisation of a compression-wood-specific laccase (CoLac1) in differentiating xylem of Chamaecyparis obtusa

2016 ◽  
Vol 43 (6) ◽  
pp. 542 ◽  
Author(s):  
Hideto Hiraide ◽  
Masato Yoshida ◽  
Saori Sato ◽  
Hiroyuki Yamamoto
Keyword(s):  
Cell Wall ◽  
Secondary Wall ◽  
Compression Wood ◽  
Laccase Activity ◽  
Outer Part ◽  
Chamaecyparis Obtusa ◽  
Wall Layer ◽  
Wall Thickening ◽  
Lignin Concentration

The secondary cell wall of compression wood tracheids has a highly lignified region (S2 L) in its outermost portion. To better understand the mechanism of S2 L formation, we focussed on the activity of laccase (a monolignol oxidase) and performed in situ studies of this enzyme in differentiating compression wood. Staining of differentiating compression wood demonstrated that laccase activity began in all cell wall layers before the onset of lignification. We detected no activity of peroxidase (another monolignol oxidase) in any cell wall layer. Thus, laccase likely plays the major role in monolignol oxidisation during compression wood differentiation. Laccase activity was higher in the S2 L region than in other secondary wall regions, suggesting that this enzyme was responsible for the high lignin concentration in this region of the cell wall. Immunolabelling demonstrated the expression of a compression-wood-specific laccase (CoLac1) immediately following the onset of secondary wall thickening, this enzyme was localised to the S2 L region, whereas much less abundant in the S1 layer or inner S2 layer. Thus, the CoLac1 protein is most likely localised to the outer part of S2 and responsible for the high lignin concentration in the S2 L region.

scholarly journals Organization of cellulose synthase complexes involved in primary cell wall synthesis in Arabidopsis thaliana

2007 ◽  
Vol 104 (39) ◽  
pp. 15572-15577 ◽  
Author(s):  
T. Desprez ◽  
M. Juraniec ◽  
E. F. Crowell ◽  
H. Jouy ◽  
Z. Pochylova ◽  
...  
Keyword(s):  
Arabidopsis Thaliana ◽  
Cell Wall ◽  
Cellulose Synthase ◽  
Primary Cell ◽  
Primary Cell Wall ◽  
Cell Wall Synthesis
Sign in / Sign up

Export Citation Format

Share Document