scholarly journals Optoelectronic devices based on the integration of halide perovskites with silicon-based materials

2021 ◽  
Vol 9 (37) ◽  
pp. 20919-20940
Author(s):  
Jingjing Liu ◽  
Junle Qu ◽  
Thomas Kirchartz ◽  
Jun Song
Keyword(s):  
Recent Progress ◽  
Optoelectronic Devices ◽  
Crucial Step ◽  
Perovskite Materials ◽  
Halide Perovskites ◽  
Silicon Based

Controlling the preparation of perovskite materials on the Si optoelectronics platform is a crucial step to realize perovskite-based optoelectronic devices. This review highlights the recent progress and remaining challenges in Si-based perovskite optoelectronic devices.

Electrolytes for advanced lithium ion batteries using silicon-based anodes

2019 ◽  
Vol 7 (16) ◽  
pp. 9432-9446 ◽  
Author(s):  
Zhixin Xu ◽  
Jun Yang ◽  
Hongping Li ◽  
Yanna Nuli ◽  
Jiulin Wang
Keyword(s):  
Solid State ◽  
Lithium Ion Batteries ◽  
Recent Progress ◽  
Lithium Ion ◽  
Review Article ◽  
Silicon Based

Recent progress in electrolytes from the liquid to the solid state for Si-based anodes is comprehensively summarized in this review article.

scholarly journals Photostable and Uniform CH3NH3PbI3 Perovskite Film Prepared via Stoichiometric Modification and Solvent Engineering

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 405
Author(s):  
Daocheng Hong ◽  
Mingyi Xie ◽  
Yuxi Tian
Keyword(s):  
Solar Cells ◽  
Optoelectronic Devices ◽  
Solvent Engineering ◽  
Light Emitting ◽  
Light Emitting Devices ◽  
Coverage Ratio ◽  
Fabrication Procedure ◽  
Fabrication Condition ◽  
Halide Perovskites ◽  
Photoluminescence Efficiency

Solution-processed organometal halide perovskites (OMHPs) have been widely used in optoelectronic devices, and have exhibited brilliant performance. One of their generally recognized advantages is their easy fabrication procedure. However, such a procedure also brings uncertainty about the opto-electric properties of the final samples and devices, including morphology, stability, coverage ratio, and defect concentration. Normally, one needs to find a balanced condition, because there is a competitive relation between these parameters. In this work, we fabricated CH3NH3PbI3 films by carefully changing the ratio of the PbI2 to CH3NH3I, and found that the stoichiometric and solvent engineering not only determined the photoluminescence efficiency and defects in the materials, but also affected the photostability, morphology, and coverage ratio. Combining solvent engineering and the substitution of PbI2 by Pb(Ac)2, we obtained an optimized fabrication condition, providing uniform CH3NH3PbI3 films with both high photoluminescence efficiency and high photostability under either I-rich or Pb-rich conditions. These results provide an optimized fabrication procedure for CH3NH3PbI3 and other OMHP films, which is crucial for the performance of perovskite-based solar cells and light emitting devices.

scholarly journals Challenges and Recent Progress on Silicon‐Based Anode Materials for Next‐Generation Lithium‐Ion Batteries

2021 ◽  
Vol 2 (6) ◽  
pp. 2170015
Author(s):  
Chengzhi Zhang ◽  
Fei Wang ◽  
Jian Han ◽  
Shuo Bai ◽  
Jun Tan ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Materials ◽  
Recent Progress ◽  
Lithium Ion ◽  
Next Generation ◽  
Silicon Based

scholarly journals Recent Advances and Challenges in Halide Perovskite Crystals in Optoelectronic Devices from Solar Cells to Other Applications

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 39
Author(s):  
Seunghyun Rhee ◽  
Kunsik An ◽  
Kyung-Tae Kang
Keyword(s):  
Solar Cells ◽  
Optoelectronic Devices ◽  
Charge Carrier Mobility ◽  
Light Emitting ◽  
Fundamental Properties ◽  
Perovskite Materials ◽  
Hybrid Perovskite ◽  
Band Position ◽  
Different Characteristics ◽  
High Charge Carrier Mobility

Organic-inorganic hybrid perovskite materials have attracted tremendous attention as a key material in various optoelectronic devices. Distinctive optoelectronic properties, such as a tunable energy band position, long carrier diffusion lengths, and high charge carrier mobility, have allowed rapid progress in various perovskite-based optoelectronic devices (solar cells, photodetectors, light emitting diodes (LEDs), and lasers). Interestingly, the developments of each field are based on different characteristics of perovskite materials which are suitable for their own applications. In this review, we provide the fundamental properties of perovskite materials and categorize the usages in various optoelectronic applications. In addition, the prerequisite factors for those applications are suggested to understand the recent progress of perovskite-based optoelectronic devices and the challenges that need to be solved for commercialization.

Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications

2016 ◽  
Vol 45 (3) ◽  
pp. 655-689 ◽  
Author(s):  
Yixin Zhao ◽  
Kai Zhu
Keyword(s):  
Thin Film ◽  
Optical Properties ◽  
Recent Progress ◽  
Research Issues ◽  
Inorganic Hybrid ◽  
Halide Perovskites ◽  
Film Synthesis ◽  
Lead Halide

This article reviews recent progress on hybrid perovskites including crystal/thin-film synthesis, structural/chemical/electro-optical properties, (opto)electronic applications, and research issues/challenges.

Novel Design Strategies for Perovskite Materials with Improved Stability and Suitable Band Gaps

2021 ◽  
Author(s):  
Bing Zhang ◽  
Xiaogang Wang ◽  
Yang Yang ◽  
Lei Tong ◽  
Bin Hu ◽  
...  
Keyword(s):  
Solar Cell ◽  
Band Gaps ◽  
Current Work ◽  
Design Strategies ◽  
Perovskite Materials ◽  
Improved Stability ◽  
Halide Perovskites ◽  
Novel Design

The instability of organometallic halide perovskites is deemed a key hindrance hampering their commercial utilization in solar cell research. In the current work, we investigate and compare the dynamics properties...

scholarly journals Lead-Free Halide Double Perovskites: A Review of the Structural, Optical, and Stability Properties as Well as Their Viability to Replace Lead Halide Perovskites

Metals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 667 ◽  
Author(s):  
Edson Meyer ◽  
Dorcas Mutukwa ◽  
Nyengerai Zingwe ◽  
Raymond Taziwa
Keyword(s):  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Lead Free ◽  
Double Perovskites ◽  
Stability Properties ◽  
Perovskite Materials ◽  
Halide Perovskites ◽  
Halide Perovskite ◽  
Light Absorbers ◽  
Lead Halide

Perovskite solar cells employ lead halide perovskite materials as light absorbers. These perovskite materials have shown exceptional optoelectronic properties, making perovskite solar cells a fast-growing solar technology. Perovskite solar cells have achieved a record efficiency of over 20%, which has superseded the efficiency of Gräztel dye-sensitized solar cell (DSSC) technology. Even with their exceptional optical and electric properties, lead halide perovskites suffer from poor stability. They degrade when exposed to moisture, heat, and UV radiation, which has hindered their commercialization. Moreover, halide perovskite materials consist of lead, which is toxic. Thus, exposure to these materials leads to detrimental effects on human health. Halide double perovskites with A2B′B″X6 (A = Cs, MA; B′ = Bi, Sb; B″ = Cu, Ag, and X = Cl, Br, I) have been investigated as potential replacements of lead halide perovskites. This work focuses on providing a detailed review of the structural, optical, and stability properties of these proposed perovskites as well as their viability to replace lead halide perovskites. The triumphs and challenges of the proposed lead-free A2B′B″X6 double perovskites are discussed here in detail.

scholarly journals Major Impediment to Highly Efficient, Stable and Low-Cost Perovskite Solar Cells

Metals ◽  
2018 ◽  
Vol 8 (11) ◽  
pp. 964 ◽  
Author(s):  
Yue Zhang ◽  
Haiming Zhang ◽  
Xiaohui Zhang ◽  
Lijuan Wei ◽  
Biao Zhang ◽  
...  
Keyword(s):  
Solar Cells ◽  
Carrier Mobility ◽  
High Efficiency ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Environmental Stability ◽  
Perovskite Materials ◽  
Hybrid Perovskite ◽  
Silicon Based ◽  
Major Impediment

Organic–inorganic hybrid perovskite solar cells (PSCs) have made immense progress in recent years, owing to outstanding optoelectronic properties of perovskite materials, such as high extinction coefficient, carrier mobility, and low exciton binding energy. Since the first appearance in 2009, the efficiency of PSCs has reached 23.3%. This has made them the most promising rival to silicon-based solar cells. However, there are still several issues to resolve to promote PSCs’ outdoor applications. In this review, three crucial aspects of PSCs, including high efficiency, environmental stability, and low-cost of PSCs, are described in detail. Recent in-depth studies on different aspects are also discussed for better understanding of these issues and possible solutions.

scholarly journals Origin of unusual bandgap shift and dual emission in organic-inorganic lead halide perovskites

2016 ◽  
Vol 2 (10) ◽  
pp. e1601156 ◽  
Author(s):  
M. Ibrahim Dar ◽  
Gwénolé Jacopin ◽  
Simone Meloni ◽  
Alessandro Mattoni ◽  
Neha Arora ◽  
...  
Keyword(s):  
Density Functional ◽  
Valence Band Maximum ◽  
Dual Emission ◽  
Time Resolved ◽  
Light Emitting ◽  
Light Emitting Devices ◽  
Perovskite Materials ◽  
Halide Perovskites ◽  
Dynamics Simulations ◽  
Increasing Temperature

Emission characteristics of metal halide perovskites play a key role in the current widespread investigations into their potential uses in optoelectronics and photonics. However, a fundamental understanding of the molecular origin of the unusual blueshift of the bandgap and dual emission in perovskites is still lacking. In this direction, we investigated the extraordinary photoluminescence behavior of three representatives of this important class of photonic materials, that is, CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2)2PbBr3, which emerged from our thorough studies of the effects of temperature on their bandgap and emission decay dynamics using time-integrated and time-resolved photoluminescence spectroscopy. The low-temperature (<100 K) photoluminescence of CH3NH3PbI3and CH3NH3PbBr3reveals two distinct emission peaks, whereas that of CH(NH2)2PbBr3shows a single emission peak. Furthermore, irrespective of perovskite composition, the bandgap exhibits an unusual blueshift by raising the temperature from 15 to 300 K. Density functional theory and classical molecular dynamics simulations allow for assigning the additional photoluminescence peak to the presence of molecularly disordered orthorhombic domains and also rationalize that the unusual blueshift of the bandgap with increasing temperature is due to the stabilization of the valence band maximum. Our findings provide new insights into the salient emission properties of perovskite materials, which define their performance in solar cells and light-emitting devices.

Sign in / Sign up

Export Citation Format

Share Document