Characterization of Single-Phase Flow Hydrodynamics in Berty Reactor using Computational Fluid Dynamics (CFD)

2021 ◽  
Author(s):  
Khunnawat Ountaksinkul ◽  
Sirada Sripinun ◽  
Panut Bumphenkiattikul ◽  
Surapon Bubphacharoen ◽  
Arthit Vongachariya ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Single Phase ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Kinetic Studies ◽  
Stirred Tank Reactors ◽  
Computational Fluid Dynamics Cfd ◽  
Continuous Stirred Tank

This work studies the flow characteristics in the Berty reactor, a gradientless reactor for kinetic studies, using three-dimensional (3D) computational fluid dynamics (CFD), and the non-ideal continuous stirred tank reactors...

Development and Validation of a 3-Dimensional Computational Fluid Dynamics (CFD) Model for Rectangular Settling Tanks in New York City Water Pollution Control Plants

2009 ◽  
Vol 4 (1) ◽  
Author(s):  
K. Ramalingam ◽  
J. Fillos ◽  
S. Xanthos ◽  
M. Gong ◽  
A. Deur ◽  
...  
Keyword(s):  
Water Pollution ◽  
Fluid Dynamics ◽  
New York ◽  
Computational Fluid Dynamics ◽  
New York City ◽  
Pollution Control ◽  
York City ◽  
Three Dimensional ◽  
Cfd Model ◽  
Computational Fluid Dynamics Cfd

New York City provides secondary treatment to approximately 78.6 m3/s among its 14 water pollution control plants (WPCPs). The process of choice has been step-feed activated sludge. Changes to the permit limits require nitrogen removal in WPCPs discharging into the Long Island Sound. The City has selected step feed biological nitrogen removal (BNR) process to upgrade the affected plants. Step feed BNR requires increasing the concentration of mixed liquors, (MLSS), which stresses the Gould II type rectangular final settling tanks (FSTs). To assess performance and evaluate alternatives to improve efficiency of the FSTs at the higher loads, New York City Department of Environmental Protection (NYCDEP) and City College of New York (CCNY) have developed a three-dimensional computer model depicting the actual structural configuration of the tanks and the current and proposed hydraulic and solids loading rates. Using Computational Fluid Dynamics (CFD) Model, Fluent 6.3.26TM as the base platform, sub-models of the SS settling characteristics as well as turbulence, flocculation, etc. were incorporated. This was supplemented by field and bench scale experiments to quantify the co-efficients integral to the sub-models. As a result, a three-dimensional model has been developed that is being used to consider different baffle arrangements, sludge withdrawal mechanisms and loading alternatives to the FSTs.

scholarly journals Analysis of a Converging, Annular, Isothermal Melt Blowing Jet Using Computational Fluid Dynamics

2005 ◽  
Vol os-14 (3) ◽  
pp. 1558925005os-14
Author(s):  
Eric M. Moore ◽  
Dimitrios V. Papavassiliou ◽  
Robert L. Shambaugh
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Near Field ◽  
Flow Characteristics ◽  
Sectional Area ◽  
Melt Blowing ◽  
Mean Velocity ◽  
Cross Sectional ◽  
Computational Fluid Dynamics Cfd

An unconventional melt blowing die was analyzed using computational fluid dynamics (CFD). This die has an annular configuration wherein the jet inlet is tapered (the cross-sectional area decreases) as the air approaches the die face. It was found that the flow characteristics of this die are different from conventional slot and annular dies. In particular, for the tapered die the near-field normalized turbulent kinetic energy was found to be lower at shallow die angles. Also, it was found that the peak mean velocity behavior was intermediate between that of conventional annular and slot dies. The centerline turbulence profiles were found to be qualitatively similar to those of annular dies; quantitatively, higher values were present for tapered dies.

A Generalized Computational Fluid Dynamics Approach for Journal Bearing Performance Prediction

1995 ◽  
Vol 209 (2) ◽  
pp. 99-108 ◽  
Author(s):  
P G Tucker ◽  
P S Keogh
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Surface Temperature ◽  
Performance Prediction ◽  
Reynolds Equation ◽  
Three Dimensional ◽  
Rotation Effect ◽  
Performance Predictions ◽  
Computational Fluid Dynamics Cfd ◽  
Shaft Surface

The use of computational fluid dynamics (CFD) techniques enables performance predictions of bearing designs to be made when the usual operating assumptions of the Reynolds equation Jail to hold. This paper addresses the application of a full three-dimensional thermohydrodynamic CFD approach to journal bearings. The journal/shaft may extend beyond the bearing length and the rotation effect is accounted for in the thermal transport process. A circumferentially uniform shaft surface temperature is not assumed. Cavitation modelling is based on averaged lubricant/vapour properties and does not set pressures directly, allowing sub-ambient pressures to be predicted. Lubricant inlet grooves are incorporated with conservation of mass and the possibility of backflow. The modelling is validated against published experimental work on fully circumferential, single inlet and two-inlet circular bore bearings. The predicted and experimental results are in general agreement, although the predicted cyclic variation of journal surface temperature is less than the experimental value. However, an assumption in the predictions was of a non-orbiting journal. The techniques developed may, in principle, be extended to the orbiting journal case providing a dynamic cavitation model can be formulated.

scholarly journals Layout Effect of Two Autonomous Underwater Vehicles on the Hydrodynamics Performances

2020 ◽  
Vol 19 ◽  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Autonomous Underwater Vehicles ◽  
Three Dimensional ◽  
Pressure Change ◽  
Underwater Vehicles ◽  
Optimal Layout ◽  
Minimum Drag ◽  
Computational Fluid Dynamics Cfd ◽  
Two Parameters

Three-dimensional computational fluid dynamics (CFD) is used for the design optimization of the layout of an autonomous underwater vehicles (AUV) containing three torpedo-shaped hulls. The AUV layout is defined by two parameters a and b present the stance following YY and XX respectively. several simulations are carried on the AUV with different positions of the torpedo in order to define the optimal layout which designates the minimum drag. the numerical results approve that the variation in the drag coefficient of the AUV is the to the interaction of the flow rate and the pressure change between the both hulls. in addition, an optimal layout for the minimum AUV drag with two torpedoes is found which provides a drag reduce of about 11.4% lower than a single UV with a single torpedo.

scholarly journals Numerical Simulation of Single-Phase and Two-Phase Flows in Separator Vessels with Inclined Half-Pipe Inlet Device Applied in Reciprocating Compressors

2018 ◽  
Vol 8 (3) ◽  
pp. 2897-2900
Author(s):  
F. P. Lucas ◽  
R. Huebner
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Single Phase ◽  
Air Flow ◽  
Air Distribution ◽  
Two Phase ◽  
Computational Fluid Dynamics Cfd ◽  
Liquid Removal ◽  
Pipe Inlet

This paper aims to apply computational fluid dynamics (CFD) to simulate air flow and air flow with water droplets, as a reasonable hypothesis for real flows, in order to evaluate a vertical separator vessel with inclined half-pipe inlet device (slope inlet). Thus, this type was compared to a separator vessel without inlet device (straight inlet). The results demonstrated a different performance for the two types in terms of air distribution and liquid removal efficiency.

Transient Analysis of a Spring-Loaded Pressure Safety Valve Using Computational Fluid Dynamics (CFD)

2010 ◽  
Vol 132 (5) ◽  
Author(s):  
Xue Guan Song ◽  
Lin Wang ◽  
Young Chul Park
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Safety Valve ◽  
Three Dimensional ◽  
Pressure Vessels ◽  
Moving Mesh ◽  
Cfd Model ◽  
Ansys Cfx ◽  
Computational Fluid Dynamics Cfd ◽  
Mesh Technique

A spring-loaded pressure safety valve (PSV) is a key device used to protect pressure vessels and systems. This paper developed a three-dimensional computational fluid dynamics (CFD) model in combination with a dynamics equation to study the fluid characteristics and dynamic behavior of a spring-loaded PSV. The CFD model, which includes unsteady analysis and a moving mesh technique, was developed to predict the flow field through the valve and calculate the flow force acting on the disk versus time. To overcome the limitation that the moving mesh technique in the commercial software program ANSYS CFX (Version 11.0, ANSYS, Inc., USA) cannot handle complex configurations in most applications, some novel techniques of mesh generation and modeling were used to ensure that the valve disk can move upward and downward successfully without negative mesh error. Subsequently, several constant inlet pressure loads were applied to the developed model. Response parameters, including the displacement of the disk, mass flow through the valve, and fluid force applied on the disk, were obtained and compared with the study of the behavior of the PSV under different overpressure conditions. In addition, the modeling approach could be useful for valve designers attempting to optimize spring-loaded PSVs.

An Introduction to Computational Fluid Dynamics and Its Application in Microfluidics

2019 ◽  
pp. 50-78
Author(s):  
João Lameu da Silva Júnior
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Single Phase ◽  
Chemical Engineering ◽  
Numerical Technique ◽  
Quality Parameters ◽  
Flow In Porous Media ◽  
Computational Fluid Dynamics Cfd ◽  
Cfd Applications ◽  
Volume Method

The chapter aims to introduce the computational fluid dynamics (CFD). A review was provided, outlining its development and applications on chemical engineering and microfluidics. The fundamental points of the CFD, listing the advantages and precautions of this numerical technique were provided. The description of CFD methodology including the three essential stages (pre-processing, solving, and post-processing) was made. The fundamental transport equations—total mass (continuity), momentum, energy, and species mass balances—and the usual boundary conditions used in CFD were explained. The main approaches used in multicomponent single-phase flows, single-phase flow in porous media, and multiphase flows in microscale were detailed, as well as the numerical mesh types and its quality parameters. A brief introduction of finite volume method (FVM) used by most of the available CFD codes was also performed, describing the main numerical solution features. Finally, the conclusions and future prospects of CFD applications are exposed.

Three-Dimensional CFD Analysis of Gas Mixing in Large Volumes

2001 ◽  
Author(s):  
Brian L. Smith
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Steady State ◽  
Three Dimensional ◽  
Air Injection ◽  
Cfd Analysis ◽  
Gas Mixing ◽  
Air Mixing ◽  
Computational Fluid Dynamics Cfd ◽  
Pure Steam

Abstract The paper describes three-dimensional Computational Fluid Dynamics (CFD) calculations undertaken in support of analyses of steam/air mixing which takes place in the drywell volumes of the 1/40th-scale ESBWR1 mock-up facility PANDA under conditions of symmetric steam/air injection and asymmetric outflow. Steady-state simulations for pure steam conditions illustrate how the flow streams mix to ensure balanced outflow conditions to the condensers. A transient calculation has also been performed to examine how air released from solution in the PANDA boiler would ultimately accumulate in the separate condenser units. Results provide a possible explanation for the rundown in performance of one of the condensers which was repeatedly observed in some of the PANDA tests.

Sign in / Sign up

Export Citation Format

Share Document