Naphtha catalytic cracking to olefins over zirconia-titania catalyst

2021 ◽  
Author(s):  
Emad N Al-Shafei ◽  
Mohammed Albahar ◽  
Mohammad F Aljishi ◽  
Ali N Jishi ◽  
Ali Alnasir ◽  
...  
Keyword(s):  
Catalytic Cracking ◽  
Nanocrystal Size ◽  
Added Value

The zirconia-titania based catalyst was synthesized by a co-participation method to study the catalytic cracking of heavy naphtha (dodecane) into high added-value chemical to olefins. The nanocrystal size catalysts were...

Fluidized Catalytic Cracking Catalyst Microstructure as Determined by A Scanning Ion Microprobe

1990 ◽  
Vol 48 (2) ◽  
pp. 302-303
Author(s):  
J.K. Lampert ◽  
G.S. Koermer ◽  
J.M. Macaoy ◽  
J.M. Chabala ◽  
R. Levi-Setti
Keyword(s):  
Catalytic Cracking ◽  
Secondary Ion Mass Spectrometry ◽  
Fuel Oil ◽  
Ion Microprobe ◽  
Fluidized Catalytic Cracking ◽  
Ion Probe ◽  
Silica Alumina ◽  
Resolution Imaging ◽  
The University ◽  
High Spatial Resolution Imaging

We have used high spatial resolution imaging secondary ion mass spectrometry (SIMS) to differentiate mineralogical phases and to investigate chemical segregations in fluidized catalytic cracking (FCC) catalyst particles. The oil industry relies on heterogeneous catalysis using these catalysts to convert heavy hydrocarbon fractions into high quality gasoline and fuel oil components. Catalyst performance is strongly influenced by catalyst microstructure and composition, with different chemical reactions occurring at specific types of sites within the particle. The zeolitic portions of the particle, where the majority of the oil conversion occurs, can be clearly distinguished from the surrounding silica-alumina matrix in analytical SIMS images.The University of Chicago scanning ion microprobe (SIM) employed in this study has been described previously. For these analyses, the instrument was operated with a 40 keV, 10 pA Ga+ primary ion probe focused to a 30 nm FWHM spot. Elemental SIMS maps were obtained from 10×10 μm2 areas in times not exceeding 524s.

An analytical microscopic study of metals in fluidized catalytic cracking catalyst

1986 ◽  
Vol 44 ◽  
pp. 854-855
Author(s):  
Clifford S. Rainey
Keyword(s):  
Electron Microscopy ◽  
Spatial Distribution ◽  
Catalytic Cracking ◽  
Catalyst Deactivation ◽  
Coke Formation ◽  
Acid Sites ◽  
Y Zeolite ◽  
Fcc Catalyst ◽  
Fluidized Catalytic Cracking ◽  
High Regeneration

The spatial distribution of V and Ni deposited within fluidized catalytic cracking (FCC) catalyst is studied because these metals contribute to catalyst deactivation. Y zeolite in FCC microspheres are high SiO2 aluminosilicates with molecular-sized channels that contain a mixture of lanthanoids. They must withstand high regeneration temperatures and retain acid sites needed for cracking of hydrocarbons, a process essential for efficient gasoline production. Zeolite in combination with V to form vanadates, or less diffusion in the channels due to coke formation, may deactivate catalyst. Other factors such as metal "skins", microsphere sintering, and attrition may also be involved. SEM of FCC fracture surfaces, AEM of Y zeolite, and electron microscopy of this work are developed to better understand and minimize catalyst deactivation.

The Added Value of Graphical Input and Display for Electron Lens Design

1990 ◽  
Vol 48 (1) ◽  
pp. 190-191
Author(s):  
B. Lencova ◽  
G. Wisselink
Keyword(s):  
Flux Density ◽  
Numerical Data ◽  
Added Value ◽  
Lens Design ◽  
Step Size ◽  
Magnetic Lens ◽  
Flux Lines ◽  
Fine Mesh ◽  
Electron Lens ◽  
User Friendly

Recent progress in computer technology enables the calculation of lens fields and focal properties on commonly available computers such as IBM ATs. If we add to this the use of graphics, we greatly increase the applicability of design programs for electron lenses. Most programs for field computation are based on the finite element method (FEM). They are written in Fortran 77, so that they are easily transferred from PCs to larger machines.The design process has recently been made significantly more user friendly by adding input programs written in Turbo Pascal, which allows a flexible implementation of computer graphics. The input programs have not only menu driven input and modification of numerical data, but also graphics editing of the data. The input programs create files which are subsequently read by the Fortran programs. From the main menu of our magnetic lens design program, further options are chosen by using function keys or numbers. Some options (lens initialization and setting, fine mesh, current densities, etc.) open other menus where computation parameters can be set or numerical data can be entered with the help of a simple line editor. The "draw lens" option enables graphical editing of the mesh - see fig. I. The geometry of the electron lens is specified in terms of coordinates and indices of a coarse quadrilateral mesh. In this mesh, the fine mesh with smoothly changing step size is calculated by an automeshing procedure. The options shown in fig. 1 allow modification of the number of coarse mesh lines, change of coordinates of mesh points or lines, and specification of lens parts. Interactive and graphical modification of the fine mesh can be called from the fine mesh menu. Finally, the lens computation can be called. Our FEM program allows up to 8000 mesh points on an AT computer. Another menu allows the display of computed results stored in output files and graphical display of axial flux density, flux density in magnetic parts, and the flux lines in magnetic lenses - see fig. 2. A series of several lens excitations with user specified or default magnetization curves can be calculated and displayed in one session.

Preliminary Findings on the Use of Session Questionnaires to Improve Clinician-Client Alliance With Special Consideration to Clinical Education

2015 ◽  
Vol 25 (1) ◽  
pp. 50-60
Author(s):  
Anu Subramanian
Keyword(s):  
Graduate Students ◽  
Clinical Education ◽  
Clinical Decision Making ◽  
Rating Scale ◽  
Treatment Effectiveness ◽  
Clinical Decision ◽  
Added Value ◽  
Therapeutic Outcomes ◽  
Specific Feedback ◽  
Stakeholder Perspective

ASHA's focus on evidence-based practice (EBP) includes the family/stakeholder perspective as an important tenet in clinical decision making. The common factors model for treatment effectiveness postulates that clinician-client alliance positively impacts therapeutic outcomes and may be the most important factor for success. One strategy to improve alliance between a client and clinician is the use of outcome questionnaires. In the current study, eight parents of toddlers who attended therapy sessions at a university clinic responded to a session outcome questionnaire that included both rating scale and descriptive questions. Six graduate students completed a survey that included a question about the utility of the questionnaire. Results indicated that the descriptive questions added value and information compared to using only the rating scale. The students were varied in their responses regarding the effectiveness of the questionnaire to increase their comfort with parents. Information gathered from the questionnaire allowed for specific feedback to graduate students to change behaviors and created opportunities for general discussions regarding effective therapy techniques. In addition, the responses generated conversations between the client and clinician focused on clients' concerns. Involving the stakeholder in identifying both effective and ineffective aspects of therapy has advantages for clinical practice and education.

Crisis Reactions and Their Consequences for the Real Sector of the Russian Economy

2011 ◽  
pp. 39-50
Author(s):  
V. Lushin
Keyword(s):  
Financial Crisis ◽  
Acute Phase ◽  
Dutch Disease ◽  
Added Value ◽  
Real Sector ◽  
The Real ◽  
Balanced Development ◽  
Russian Economy ◽  
The Government ◽  
State Modernization

The author analyzes factors that led to a deeper fall in output and profitability in the real sector of the Russian economy in comparison with other segments during the acute phase of the financial crisis. It is argued that some contradictions in the government anti-recession policy, activities of the financial sector and natural monopolies lead to pumping out added value created in manufacturing and agriculture, increase symptoms of the «Dutch disease», etc. It is shown that it may threaten the balanced development of the Russian economy, and a set of measures is suggested to minimize these tendencies and create a basis for the state modernization policy.

Implementasi Analisis Proses Bisnis Sebagai Upaya Pengurangan Biaya

2019 ◽  
Vol 10 (1) ◽  
pp. 1-27
Author(s):  
Aniek Wijayanti
Keyword(s):  
Business Process ◽  
Cost Reduction ◽  
Process Analysis ◽  
Value Added ◽  
Added Value ◽  
Natural Material ◽  
Management Activity ◽  
Procurement Process ◽  
Material Procurement ◽  
The Cost

Business Process Analysis can be used to eliminate or reduce a waste cost caused by non value added activities that exist in a process. This research aims at evaluating activities carried out in the natural material procurement process in the PT XYZ, calculating the effectiveness of the process cycle, finding a way to improve the process management, and calculating the cost reduction that can achieved by activity management. A case study was the approach of this research. The researcher obtained research data throughout deep interviews with the staff who directly involved in the process, observation, and documentation of natural material procurement. The result of this study show that the effectiveness of the process cycle of natural material procurement in the factory reached as much as 87,1% for the sand material and 72% for the crushed stone. This indicates that the process still carry activities with no added value and still contain ineffective costs. Through the Business Process Mechanism, these non value added activities can be managed so that the process cycle becomes more efficient and cost effectiveness is achieved. The result of the effective cycle calculation after the management activities implementation is 100%. This means that the cost of natural material procurement process has become effective. The result of calculation of the estimated cost reduction as a result of management activity is as much as Rp249.026.635,90 per year.

Sign in / Sign up

Export Citation Format

Share Document