Disparate effect of strain on thermal conductivity of 2-D materials

2021 ◽  
Author(s):  
Dheeraj K V S ◽  
Sarith Plasseril Sathian
Keyword(s):  
Thermal Conductivity ◽  
Thermal Transport ◽  
High Surface ◽  
Volume Ratio ◽  
External Perturbations

Thermal transport in 2-D (Dimensional) structures is highly susceptible to external perturbations such as strain, owing to their high surface-to-volume ratio. In this study, we investigate the influence of strain...

scholarly journals Nanoporous Metallic Films

2021 ◽  
Author(s):  
Swastic ◽  
Jegatha Nambi Krishnan
Keyword(s):  
Thermal Conductivity ◽  
High Surface ◽  
Volume Ratio ◽  
Metallic Films ◽  
Top Down ◽  
Drug Delivery Vehicles ◽  
Energy Applications ◽  
Potential Applications ◽  
Current Scenario ◽  
Delivery Vehicles

Nanoporous metallic films are known to have high surface to volume ratio due to the presence of pores. The presence of pores and ligaments make them suitable for various critical applications like sensing, catalysis, electrodes for energy applications etc. Additionally, they also combine properties of metals like good electrical and thermal conductivity and ductility. They can be fabricated using top-down or bottom-up approaches also known as dealloying and templating which give the fabricator room to tailor properties according to need. In addition, they could find potential applications in many relevant fields in current scenario like drug delivery vehicles. However, there is a long way to go to extract its whole potential.

scholarly journals Integrated Co-axial Electrospinning for Single-Step Production of 1D Aligned Bimetallic Carbon Fibers@AuNPs-PtNPs/NiNPs-PtNPs Towards H2 Detection

2021 ◽  
Author(s):  
Keerthi G Nair ◽  
Vishnuraj Ramakrishnan ◽  
Biji Pullithadathil
Keyword(s):  
Carbon Fibers ◽  
Thermal Transport ◽  
High Surface ◽  
Volume Ratio ◽  
Single Step ◽  
One Dimensional ◽  
1D Nanostructure

One dimensional (1D) nanostructure like nanorods, nanowires, nanotubes and nanofibers have aroused great attention owing to their exceptional properties like high surface-to-volume ratio, excellent electron and thermal transport and also...

Rapid prototyping methods of silicon carbide micro heat exchangers

2005 ◽  
Vol 219 (7) ◽  
pp. 525-538 ◽  
Author(s):  
H-C Liu ◽  
H Tsuru ◽  
A G Cooper ◽  
F B Prinz
Keyword(s):  
Thermal Conductivity ◽  
Silicon Carbide ◽  
Heat Exchangers ◽  
High Surface ◽  
Volume Ratio ◽  
Ceramic Materials ◽  
High Thermal Conductivity ◽  
Metal Alloys ◽  
Heat Management ◽  
Shape Complexity

Conventional heat exchangers are mainly constructed of metal alloys. The manufacturing process of metal alloys usually requires assembling and joining techniques such as welding and diffusion bonding. In addition, the structures are limited to simple shapes due to the restrictions of the fabrication methods. This research focused on the manufacturing of compact heat exchangers made of high thermal-conductivity ceramic material, rather than on the performance of the devices. To achieve a high surface-volume ratio in heat exchangers, a strategy was adopted that fabricates miniaturized devices with a high shape complexity. This paper discusses an approach that uses a combination of mould shape deposition manufacturing (Mould SDM) and the gelcasting process to fabricate monolithic ceramic heat exchangers. This approach not only makes one-piece heat exchangers possible but introduces materials with superior thermal properties to the heat management applications. Silicon carbide is chosen for such applications because of its high thermal conductivity, thermal resistance, and corrosion resistance. The high chemical resistance of ceramic materials also extends the use of heat exchangers to chemical processing devices such as chemical reactors. The initial investigation of the process for micro reactors is also discussed.

scholarly journals Decoupling electron and phonon transport in single-nanowire hybrid materials for high-performance thermoelectrics

2021 ◽  
Vol 7 (20) ◽  
pp. eabe6000
Author(s):  
Lin Yang ◽  
Madeleine P. Gordon ◽  
Akanksha K. Menon ◽  
Alexandra Bruefach ◽  
Kyle Haas ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Thermal Transport ◽  
Electrical Transport ◽  
High Performance ◽  
Figure Of Merit ◽  
Phonon Transport ◽  
Core Shell ◽  
Nanowire Diameter ◽  
High Performing ◽  
Polycrystalline Thin Films

Organic-inorganic hybrids have recently emerged as a class of high-performing thermoelectric materials that are lightweight and mechanically flexible. However, the fundamental electrical and thermal transport in these materials has remained elusive due to the heterogeneity of bulk, polycrystalline, thin films reported thus far. Here, we systematically investigate a model hybrid comprising a single core/shell nanowire of Te-PEDOT:PSS. We show that as the nanowire diameter is reduced, the electrical conductivity increases and the thermal conductivity decreases, while the Seebeck coefficient remains nearly constant—this collectively results in a figure of merit, ZT, of 0.54 at 400 K. The origin of the decoupling of charge and heat transport lies in the fact that electrical transport occurs through the organic shell, while thermal transport is driven by the inorganic core. This study establishes design principles for high-performing thermoelectrics that leverage the unique interactions occurring at the interfaces of hybrid nanowires.

scholarly journals Electrospun Nanofibers for Sensing and Biosensing Applications—A Review

2021 ◽  
Vol 22 (12) ◽  
pp. 6357
Author(s):  
Kinga Halicka ◽  
Joanna Cabaj
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Electrospun Nanofibers ◽  
Clinical Diagnostics ◽  
Loading Capacity ◽  
Electrospun Nanofiber ◽  
Sensing Platforms ◽  
Different Types

Sensors and biosensors have found applications in many areas, e.g., in medicine and clinical diagnostics, or in environmental monitoring. To expand this field, nanotechnology has been employed in the construction of sensing platforms. Because of their properties, such as high surface area to volume ratio, nanofibers (NFs) have been studied and used to develop sensors with higher loading capacity, better sensitivity, and faster response time. They also allow to miniaturize designed platforms. One of the most commonly used techniques of the fabrication of NFs is electrospinning. Electrospun NFs can be used in different types of sensors and biosensors. This review presents recent studies concerning electrospun nanofiber-based electrochemical and optical sensing platforms for the detection of various medically and environmentally relevant compounds, including glucose, drugs, microorganisms, and toxic metal ions.

scholarly journals Study of the geometry of open channels in a layer-bed-type microfluidic immobilized enzyme reactor

2021 ◽  
Author(s):  
Cynthia Nagy ◽  
Robert Huszank ◽  
Attila Gaspar
Keyword(s):  
Immobilized Enzyme ◽  
High Surface ◽  
Volume Ratio ◽  
Volumetric Flow Rate ◽  
Enzyme Reactor ◽  
Channel Pattern ◽  
Immobilized Enzyme Reactor ◽  
Split Flow ◽  
Parallel Streams ◽  
Enzymatic Microreactors

AbstractThis paper aims at studying open channel geometries in a layer-bed-type immobilized enzyme reactor with computer-aided simulations. The main properties of these reactors are their simple channel pattern, simple immobilization procedure, regenerability, and disposability; all these features make these devices one of the simplest yet efficient enzymatic microreactors. The high surface-to-volume ratio of the reactor was achieved using narrow (25–75 μm wide) channels. The simulation demonstrated that curves support the mixing of solutions in the channel even in strong laminar flow conditions; thus, it is worth including several curves in the channel system. In the three different designs of microreactor proposed, the lengths of the channels were identical, but in two reactors, the liquid flow was split to 8 or 32 parallel streams at the inlet of the reactor. Despite their overall higher volumetric flow rate, the split-flow structures are advantageous due to the increased contact time. Saliva samples were used to test the efficiencies of the digestions in the microreactors. Graphical abstract

scholarly journals A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Biological Response ◽  
Volume Ratio ◽  
Recent Decade ◽  
Disease Diagnosis ◽  
Electrical Signal ◽  
Detection Sensitivity ◽  
Wide Range ◽  
Color Tunability

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

scholarly journals Water uptake of various electrospun nonwovens

2020 ◽  
Vol 6 (3) ◽  
pp. 155-158
Author(s):  
Katharina Wulf ◽  
Volkmar Senz ◽  
Thomas Eickner ◽  
Sabine Illner
Keyword(s):  
Contact Angle ◽  
Surface Modification ◽  
Water Absorption ◽  
Water Uptake ◽  
Biomedical Applications ◽  
High Surface ◽  
Volume Ratio ◽  
Polymer Composition ◽  
Water Wetting ◽  
Morphology Changes

AbstractIn recent years, nanofiber based materials have emerged as especially interesting for several biomedical applications, regarding their high surface to volume ratio. Due to the superficial nano- and microstructuring and the different wettability compared to nonstructured surfaces, the water absorption is an important parameter with respect to the degradation stability, thermomechanic properties and drug release properties, depending on the type of polymer [1]. In this investigation, the water absorption of different non- and plasma modified biostable nanofiber nonwovens based on polyurethane, polyester and polyamide were analysed and compared. Also, the water absorption by specified water wetting, the contact angle and morphology changes were examined. The results show that the water uptake is highly dependent on the surface modification and the polymer composition itself and can therefore be partially changed.

scholarly journals Solar-blind ultraviolet photodetector based on vertically aligned single-crystalline β-Ga2O3 nanowire arrays

Nanophotonics ◽  
2020 ◽  
Vol 9 (15) ◽  
pp. 4497-4503
Author(s):  
Liying Zhang ◽  
Xiangqian Xiu ◽  
Yuewen Li ◽  
Yuxia Zhu ◽  
Xuemei Hua ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Light Trapping ◽  
High Surface ◽  
Volume Ratio ◽  
Average Diameter ◽  
Nanowire Arrays ◽  
Etching Technique ◽  
Inductively Coupled ◽  
Solar Blind ◽  
Vertically Aligned

AbstractVertically aligned nanowire arrays, with high surface-to-volume ratio and efficient light-trapping absorption, have attracted much attention for photoelectric devices. In this paper, vertical β-Ga2O3 nanowire arrays with an average diameter/height of 110/450 nm have been fabricated by the inductively coupled plasma etching technique. Then a metal-semiconductor-metal structured solar-blind photodetector (PD) has been fabricated by depositing interdigital Ti/Au electrodes on the nanowire arrays. The fabricated β-Ga2O3 nanowire PD exhibits ∼10 times higher photocurrent and responsivity than the corresponding film PD. Moreover, it also possesses a high photocurrent to dark current ratio (Ilight/Idark) of ∼104 and a ultraviolet/visible rejection ratio (R260 nm/R400 nm) of 3.5 × 103 along with millisecond-level photoresponse times.

scholarly journals Design Considerations for Borehole Thermal Energy Storage (BTES): A Review with Emphasis on Convective Heat Transfer

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-26 ◽  
Author(s):  
Helge Skarphagen ◽  
David Banks ◽  
Bjørn S. Frengstad ◽  
Harald Gether
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Theoretical Calculations ◽  
High Surface ◽  
High Surface Area ◽  
Volume Ratio ◽  
Thermal Recovery ◽  
Conductive Heat ◽  
Geological Environment

Borehole thermal energy storage (BTES) exploits the high volumetric heat capacity of rock-forming minerals and pore water to store large quantities of heat (or cold) on a seasonal basis in the geological environment. The BTES is a volume of rock or sediment accessed via an array of borehole heat exchangers (BHE). Even well-designed BTES arrays will lose a significant quantity of heat to the adjacent and subjacent rocks/sediments and to the surface; both theoretical calculations and empirical observations suggest that seasonal thermal recovery factors in excess of 50% are difficult to obtain. Storage efficiency may be dramatically reduced in cases where (i) natural groundwater advection through the BTES removes stored heat, (ii) extensive free convection cells (thermosiphons) are allowed to form, and (iii) poor BTES design results in a high surface area/volume ratio of the array shape, allowing high conductive heat losses. The most efficient array shape will typically be a cylinder with similar dimensions of diameter and depth, preferably with an insulated top surface. Despite the potential for moderate thermal recovery, the sheer volume of thermal storage that the natural geological environment offers can still make BTES a very attractive strategy for seasonal thermal energy storage within a “smart” district heat network, especially when coupled with more efficient surficial engineered dynamic thermal energy stores (DTES).

Sign in / Sign up

Export Citation Format

Share Document