CCCLVI.—The equilibrium in the systems aluminium sulphate–copper sulphate–water and aluminium sulphate–ferrous sulphate–water at 25°

1925 ◽  
Vol 127 (0) ◽  
pp. 2598-2602 ◽  
Author(s):  
Vincent Joseph Occleshaw
2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Lopamudra Nayak

Jute-cotton and jute-wool union fabrics have been printed with colorant extracted from Rheum emodi with guar gum and albumin as thickening agents and aluminium sulphate, copper sulphate, and ferrous sulphate as mordants. Printing with Rheum emodi colorant with different mordants resulted in different shades ranging from yellowish brown, deep brown, reddish brown, and gray shades to olive black. The K/S value showed that mordants, namely, CuSO4 and FeSO4, exhibited high colour absorption regardless of the nature of material used. All the printed samples have good to excellent wash, rubbing and light fastness properties regardless of the nature of materials, mordants, and thickeners used. Guar gum is closely at par with albumin as a thickening agent and considering the cost and availability of raw material, guar gum is the better choice for the textile industry.


1925 ◽  
Vol 127 (0) ◽  
pp. 2550-2551 ◽  
Author(s):  
Robert Martin Caven ◽  
Thomas Corlett Mitchell

Tekstilec ◽  
2020 ◽  
Vol 63 (3) ◽  
pp. 195-202
Author(s):  
Kamrun Nahar ◽  
◽  
Shurfun Nahar Arju ◽  
Jannatul Ferdush ◽  
Marzia Islam ◽  
...  

Natural dyestuff has reverted its position in the colouration of textile substrates due to rising concerns of consumers and buyers, particularly about environmental impacts and health issues. Eucalyptus leaves were selected in this study as a source of natural dye along with some of the most generally used mordants to observe the impact of dyeing on jute fabric while trying to keep the dyeing parameters at a minimum level. Dyes were extracted from eucalyptus leaves by boiling in water. Then, the fabric was pre-mordanted using different synthetic mordanting agents, such as alum, potassium dichromate, copper sulphate and ferrous sulphate, which are generally used to substantively enhance the dyestuff on textile fabrics and to improve the fastness properties. Synthetic mordant was used here instead of natural mordant due to the better dyeing compatibility of jute fabric with eucalyptus leaves, since natural mordant has little effect on jute fabric during the process of dyeing. Another aim of this research is to curb the time and energy consumption of the jute dyeing process and so the dyeing is carried out at 75 °C for about 30 minutes. Various types of evaluations were conducted through visual assessment, checking the colour-coordinate values and colour strength values. While colour fastness properties were evaluated by different fastness testing, such as colour fastness to water, washing, rubbing and perspiration. This dyeing process yields a colour range from yellowish to brown with the variation of mordants applied on the fabric. In addition to that, colour co-ordinate and colour strength values ensure better results of dyed fabrics pretreated with ferrous sulphate. Jute fabric dyed with only extracted eucalyptus solution provided satisfactory results in all colour fastness tests, while fabric treated with different mordants showed variations in fastness ratings, and fabric treated with ferrous sulphate and copper sulphate had slightly better fastness ratings.


1930 ◽  
Vol 34 (10) ◽  
pp. 2375-2377 ◽  
Author(s):  
H. D. Crockford ◽  
M. W. Webster

2009 ◽  
Vol 1 (2) ◽  
pp. 173-179
Author(s):  
Meenu Srivastava ◽  
Preeti Udawat

The present study is based on the process development for colouring of silk yarns with Dhavdi flowers using selected mordants to study its effects on colour fastness properties and optimization of different extraction conditions, duration and concentration for better dye and its shades. The results revealed that aqueous medium was suitable for extraction of dye from pink petals of Dhavdi flowers for one hour. The shades of midbuff, sand stone ,coffee and olive green brown were obtained by taking 4 g dried powder of dhavdi dye for dyeing 1 gram of silk material for 45 minutes. All the four mordants were found suitable for application on silk, 10 % of alum, 3 % of chrome, 2 % of copper sulphate and 3% ferrous sulphate were found to produce best shades on silk material. Post mordanting had resulted in darker shades in all the mordant. Simultaneous mordanting method was found best in case of chrome mordant. Excellent to outstanding fastness to sunlight was found in all mordanted samples. There was absolutely no staining in washed samples. Colour change was not found in the samples subjected to crocking in both dry and wet conditions except in case of ferrous mordanted samples,. The colour was stable as shown by their higher resistance towards acidic and alkaline perspiration. Hence, the dye obtained from Dhavdi flowers proved to be extremely good and can be recommended for dyeing silk fabric.


IARJSET ◽  
2019 ◽  
Vol 6 (11) ◽  
pp. 1-5
Author(s):  
Mohammad Tofayal Ahmed ◽  
Md Golam Firoz ◽  
Md Yeasir Hasan

Sign in / Sign up

Export Citation Format

Share Document