Emerging investigator series: control of membrane fouling by dissolved algal organic matter using pre-oxidation with coagulation as seawater pretreatment

2020 ◽  
Vol 6 (4) ◽  
pp. 935-944 ◽  
Author(s):  
Bhaskar Jyoti Deka ◽  
Jiaxin Guo ◽  
Sanghyun Jeong ◽  
Manish Kumar ◽  
Alicia Kyoungjin An
Keyword(s):  
Organic Matter ◽  
Membrane Fouling ◽  
Chemical Oxidation ◽  
Dissolved Air Flotation ◽  
Algal Organic Matter ◽  
Wet Chemical ◽  
Air Flotation ◽  
Dissolved Air

High AOM removal achieved by pre-oxidation with coagulation–flocculation-dissolved air flotation. In situ ferrate was formed by wet chemical oxidation of NaOCl-Fe3+. Membrane fouling was significantly alleviated and assessed by OCT technique.

scholarly journals The role of algal organic matter in the separation of algae and cyanobacteria using the novel “Posi” - Dissolved air flotation process

2018 ◽  
Vol 130 ◽  
pp. 20-30 ◽  
Author(s):  
Narasinga Rao Hanumanth Rao ◽  
Russell Yap ◽  
Michael Whittaker ◽  
Richard M. Stuetz ◽  
Bruce Jefferson ◽  
...  
Keyword(s):  
Organic Matter ◽  
The Novel ◽  
Dissolved Air Flotation ◽  
Flotation Process ◽  
Algal Organic Matter ◽  
Air Flotation ◽  
Dissolved Air

Reducing the effect of cyanobacteria in the microfiltration of secondary effluent

2010 ◽  
Vol 62 (7) ◽  
pp. 1682-1688 ◽  
Author(s):  
Y. T. Goh ◽  
J. L. Harris ◽  
F. A. Roddick
Keyword(s):  
Organic Matter ◽  
Sewage Treatment ◽  
Cyanobacterial Blooms ◽  
Secondary Effluent ◽  
Dissolved Air Flotation ◽  
Algal Organic Matter ◽  
Alum Coagulation ◽  
Pre Treatment ◽  
The Impact ◽  
Dissolved Air

Cyanobacterial blooms in the lagoons of sewage treatment plants can severely impact the performance of membrane plants treating the effluent. This paper investigates the impact of Microcystis aeruginosa in a secondary effluent on the microfiltration filterability and cleaning of the membrane. Alum coagulation and dissolved air flotation (DAF) were investigated to remove the algae and so enhance the volume of effluent processed, and their influence on reversible and irreversible fouling. Degree of fouling due to the algal components was found to be in decreasing order of algal cells, algal organic matter and extracellular organic matter. Alum coagulation with 5 mg L−1 as Al3 +  led to a substantial increase in permeate volume, an increase in dissolved organic carbon removal, and a foulant layer which protected the membrane from internal fouling but which was hydraulically removable resulting in full flux recovery. Pre-treatment by DAF or 1.5 μm filtration following alum coagulation enhanced the flux rate and permeate volume but exposed the membrane to internal irreversible fouling.

scholarly journals In situ treatment of metalworking wastewater by chemical addition-dissolved air flotation coupled with UV, H2O2 & ZnO

Heliyon ◽  
2020 ◽  
Vol 6 (1) ◽  
pp. e03091 ◽  
Author(s):  
Mohammad Mehdi Golbini Mofrad ◽  
Hamidreza Pourzamani ◽  
Mohammad Mehdi Amin ◽  
Iman Parseh ◽  
Mohammadreza Alipour
Keyword(s):  
Dissolved Air Flotation ◽  
Air Flotation ◽  
Dissolved Air

Enhancing organic matter removal in desalination pretreatment systems by application of dissolved air flotation

Desalination ◽  
2016 ◽  
Vol 383 ◽  
pp. 12-21 ◽  
Author(s):  
Yulia Shutova ◽  
Barun Lal Karna ◽  
Adam C. Hambly ◽  
Belinda Lau ◽  
Rita K. Henderson ◽  
...  
Keyword(s):  
Organic Matter ◽  
Dissolved Air Flotation ◽  
Organic Matter Removal ◽  
Air Flotation ◽  
Dissolved Air

Removal of hydrocarbons from petrochemical wastewater by dissolved air flotation

2001 ◽  
Vol 43 (8) ◽  
pp. 107-113 ◽  
Author(s):  
N. I. Galil ◽  
D. Wolf
Keyword(s):  
Organic Matter ◽  
Biological Treatment ◽  
Suspended Solids ◽  
Cationic Polyelectrolyte ◽  
Free Form ◽  
Dissolved Air Flotation ◽  
Separation Unit ◽  
Hydrophobic Compounds ◽  
Air Flotation ◽  
Dissolved Air

The dissolved air flotation (DAF) method has an important role in the removal of hydrocarbons, as well as in the protection of the biological treatment, which usually follows the DAF. The aims of this study were to evaluate the removal efficiencies of suspended solids, general organic matter, hydrocarbons and phenols by DAF, as influenced by the flocculant type, aluminum sulfate (alum) or a cationic polyelectrolyte. Laboratory batch experiments included chemical flocculation followed by DAF, controlling the flocculant dose and the air to solids ratio. The characterization of the influent and effluent was based on general analysis of organic matter (COD), suspended solids, hydrocarbons and phenols. The influent to all experiments was supplied daily from the outlet of a full scale oil-water gravitational separation unit at a petrochemical complex in Haifa, Israel. The influent contained hydrocarbons in the range of 20 to 77 mg/L. Usually less than 10% were found in “free” form, 70 to 80% were emulsified and 10 to 20% were dissolved. The DAF process enabled us to reduce the general hydrocarbon content by 50 to 90%. The effluent was characterized by stable and uniform levels of suspended solids, and oil, almost without depending on the influent concentrations. The results indicate that the chemical flocculation followed by DAF removed efficiently the emulsified phase, which could be aggregated and separated to the surface. However, it was found that the process could also remove substantial amounts of dissolved organic matter. This mechanism could be explained by the hydrophobic characteristics of some of the substances, which could bind to the solid surfaces. It was found that aggregates created by the flocculation with the cationic polyelectrolite (C-577) could remove up to 40% from the dissolved hydrocarbon. Alum flocs also indicated removal of soluble materials, mainly phenols. The results obtained in this study indicated the possibility to improve the protection of the biological treatment process by preliminary removal of hydrophobic compounds, usually considered as either inhibitory or toxic. This removal can be based on sorption onto aggregates created by chemical flocculation, which can be efficiently removed by dissolved air flotation.

scholarly journals Scaled-Up Biodiesel Production from Meat Processing Dissolved Air Flotation Sludge: A Simulation Study

2018 ◽  
Vol 1 (1) ◽  
pp. 17-43 ◽  
Author(s):  
Oseweuba Okoro
Keyword(s):  
Uncertainty Analysis ◽  
Production Process ◽  
Production Cost ◽  
Biodiesel Production ◽  
Integrated Process ◽  
Meat Processing ◽  
Dissolved Air Flotation ◽  
Air Flotation ◽  
Dissolved Air

For the first time, a steady state computational simulation for the production of biodiesel from meat processing dissolved air flotation sludge via an integrated process of in-situ hydrolysis and esterification technologies has been investigated. Important thermophysical properties of the intrinsic lipids of dissolved air flotation sludge were estimated using chemical constituent fragment methods. The environmental performance and the economic performance of the biodiesel production process were assessed via the estimation of the net energy ratio (NER) and the unit production cost, respectively. Since electrical energy requirements may be satisfied via either non-renewable (case A) or renewable sources (case B), the NER was determined for both scenarios. To enhance the robustness of the study results, uncertainties in the NER and the unit cost of the biodiesel production process due to the variability of the underlying study assumptions were also assessed. Uncertainty analysis indicated that the likely range of the NER for the biodiesel production process for cases A and B are 1.76 to 3.32 and 1.82 to 3.36, respectively, at 95% probability. Uncertainty analysis also showed that the likely range of the unit production cost for biodiesel is $US0.41/kg-biodiesel to $US0.71/kg-biodiesel at 95% probability. The results that were obtained in this study therefore provide evidence of both the environmental sustainability and the economic viability of biodiesel production from dissolved air flotation sludge via the proposed integrated process of in-situ hydrolysis and esterification.

Pre-treatment with dissolved air flotation considering an integrated process design

2001 ◽  
Vol 1 (2) ◽  
pp. 115-122
Author(s):  
J. Dahlquist ◽  
M. Kulesza
Keyword(s):  
Organic Matter ◽  
Process Design ◽  
Treatment Plant ◽  
Integrated Process ◽  
Raw Water ◽  
Dissolved Air Flotation ◽  
Air Flotation ◽  
Pre Treatment ◽  
Treatment Step ◽  
Dissolved Air

The raw water from Lake Zegrzynski is difficult to treat and requires a high chemical dosing rate of coagulant for the reduction of organic matter in order to comply with EU standards. The high degree of reduction calls for an efficient coagulant, but also an optimal chemistry such as correct dosing amount and an optimal flocculation-pH. The paper describes different removal efficiencies of organic matter, particularly with respect to pH in flocculation. During the warm season, the raw water can also suffer from large amounts of plankton that are difficult to remove to a satisfactory degree. In a two-step chemical treatment concept, with Dissolved Air Flotation (DAF) and the pulsator process, the plankton content in the final outlet water is reduced to very low levels. It follows that eventual peaks of plankton in the raw water cannot be detected in the final outlet water. Ozone is added for removal of taste and odour originating from the presence of plankton. In the pre-treatment step prior to the ozonation, a great deal of the organic matter is removed, which reduces the necessary ozone dosage. The Municipal Water Company of Warsaw City has decided to consider an additional pre-treatment step to the existing water treatment plant at Wieliszew. For that purpose, and bearing in mind an integrated process design, the company has performed pilot-scale experiments with DAF installed prior to a process line identical with the existing full-scale plant. The experimental flow is about 10 m3/h.

Sign in / Sign up

Export Citation Format

Share Document