2H → 1T′ phase transformation in Janus monolayer MoSSe and MoSTe: an efficient hole injection contact for 2H-MoS2

2018 ◽  
Vol 6 (47) ◽  
pp. 13000-13005 ◽  
Author(s):  
Zhiguo Wang
Keyword(s):  
Phase Transformation ◽  
Hole Injection ◽  
Type Contact ◽  
P Type ◽  
Phase Engineering

A p-type contact for 2H-MoS2 monolayer-based nano-devices through phase engineering.

Effective performance improvement of organic thin film transistors with multi-layer modifications

2020 ◽  
Vol 91 (3) ◽  
pp. 30201
Author(s):  
Hang Yu ◽  
Jianlin Zhou ◽  
Yuanyuan Hao ◽  
Yao Ni
Keyword(s):  
Thin Film ◽  
Thin Film Transistors ◽  
Performance Enhancement ◽  
Organic Thin Film Transistors ◽  
Electrical Performance ◽  
Hole Injection ◽  
Organic Thin Film ◽  
Effective Performance ◽  
Significant Performance ◽  
P Type

Organic thin film transistors (OTFTs) based on dioctylbenzothienobenzothiophene (C8BTBT) and copper (Cu) electrodes were fabricated. For improving the electrical performance of the original devices, the different modifications were attempted to insert in three different positions including semiconductor/electrode interface, semiconductor bulk inside and semiconductor/insulator interface. In detail, 4,4′,4′′-tris[3-methylpheny(phenyl)amino] triphenylamine (m-MTDATA) was applied between C8BTBTand Cu electrodes as hole injection layer (HIL). Moreover, the fluorinated copper phthalo-cyanine (F16CuPc) was inserted in C8BTBT/SiO2 interface to form F16CuPc/C8BTBT heterojunction or C8BTBT bulk to form C8BTBT/F16CuPc/C8BTBT sandwich configuration. Our experiment shows that, the sandwich structured OTFTs have a significant performance enhancement when appropriate thickness modification is chosen, comparing with original C8BTBT devices. Then, even the low work function metal Cu was applied, a normal p-type operate-mode C8BTBT-OTFT with mobility as high as 2.56 cm2/Vs has been fabricated.

scholarly journals Large Area Emission in p-Type Polymer-Based Light-Emitting Field-Effect Transistors by Incorporating Charge Injection Interlayers

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 901
Author(s):  
Gizem Acar ◽  
Muhammad Javaid Iqbal ◽  
Mujeeb Ullah Chaudhry
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Charge Injection ◽  
Limiting Factors ◽  
Hole Injection ◽  
Large Area ◽  
Device Structure ◽  
Light Emitting ◽  
Emission Area ◽  
P Type

Organic light-emitting field-effect transistors (LEFETs) provide the possibility of simplifying the display pixilation design as they integrate the drive-transistor and the light emission in a single architecture. However, in p-type LEFETs, simultaneously achieving higher external quantum efficiency (EQE) at higher brightness, larger and stable emission area, and high switching speed are the limiting factors for to realise their applications. Herein, we present a p-type polymer heterostructure-based LEFET architecture with electron and hole injection interlayers to improve the charge injection into the light-emitting layer, which leads to better recombination. This device structure provides access to hole mobility of ~2.1 cm2 V−1 s−1 and EQE of 1.6% at a luminance of 2600 cd m−2. Most importantly, we observed a large area emission under the entire drain electrode, which was spatially stable (emission area is not dependent on the gate voltage and current density). These results show an important advancement in polymer-based LEFET technology toward realizing new digital display applications.

Semiconductor self-assembled monolayers as selective contacts for efficient PiN perovskite solar cells

2019 ◽  
Vol 12 (1) ◽  
pp. 230-237 ◽  
Author(s):  
E. Yalcin ◽  
M. Can ◽  
C. Rodriguez-Seco ◽  
E. Aktas ◽  
R. Pudi ◽  
...  
Keyword(s):  
Solar Cells ◽  
Organic Molecules ◽  
Perovskite Solar Cells ◽  
Hole Transport ◽  
Self Assembled Monolayers ◽  
Lead Iodide ◽  
Assembled Monolayers ◽  
Type Contact ◽  
Self Assembled ◽  
P Type

Herein, we studied the use of two different Self Assembled Monolayers (SAMs) made of semiconductor hole transport organic molecules to replace the most common p-type contact, PEDOT:PSS, in PiN methyl ammonium lead iodide perovskite solar cells (PSCs).

scholarly journals Electronic Sensing Platform (ESP) Based on Open-Gate Junction Field-Effect Transistor (OG-JFET) for Life Science Applications: Design, Modeling and Experimental Results

Sensors ◽  
2021 ◽  
Vol 21 (22) ◽  
pp. 7491
Author(s):  
Abbas Panahi ◽  
Deniz Sadighbayan ◽  
Ebrahim Ghafar-Zadeh
Keyword(s):  
Field Effect ◽  
Field Effect Transistor ◽  
Comsol Multiphysics ◽  
Subtle Difference ◽  
Back Gate ◽  
Sensing Platform ◽  
Type Layer ◽  
Type Contact ◽  
Effect Transistor ◽  
P Type

This paper presents a new field-effect sensor called open-gate junction gate field-effect transistor (OG-JFET) for biosensing applications. The OG-JFET consists of a p-type channel on top of an n-type layer in which the p-type serves as the sensing conductive layer between two ohmic contacted sources and drain electrodes. The structure is novel as it is based on a junction field-effect transistor with a subtle difference in that the top gate (n-type contact) has been removed to open the space for introducing the biomaterial and solution. The channel can be controlled through a back gate, enabling the sensor’s operation without a bulky electrode inside the solution. In this research, in order to demonstrate the sensor’s functionality for chemical and biosensing, we tested OG-JFET with varying pH solutions, cell adhesion (human oral neutrophils), human exhalation, and DNA molecules. Moreover, the sensor was simulated with COMSOL Multiphysics to gain insight into the sensor operation and its ion-sensitive capability. The complete simulation procedures and the physics of pH modeling is presented here, being numerically solved in COMSOL Multiphysics software. The outcome of the current study puts forward OG-JFET as a new platform for biosensing applications.

Sign in / Sign up

Export Citation Format

Share Document