scholarly journals A non-enzymatic glucose sensor based on electrospun 3-D copper oxide micro-nanofiber network films using carboxylic-functionalized poly(arylene ether ketone)s as templates

RSC Advances ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 6613-6619 ◽  
Author(s):  
Mengzhu Liu ◽  
Yongpeng Wang ◽  
Haibo Zhang ◽  
Zhenhua Jiang
Keyword(s):  
Copper Oxide ◽  
Electrode Material ◽  
Glucose Sensor ◽  
High Surface ◽  
Volume Ratio ◽  
Glucose Sensors ◽  
Arylene Ether ◽  
Ether Ketone ◽  
Promising Electrode Material

3-D network films of rope-like CuO-MNFs with high surface-to-volume ratio were prepared. The product is a promising electrode material for fabrication of amperometric enzymeless glucose sensors.

Semimetallic vanadium molybdenum sulfide for high-performance battery electrodes

2018 ◽  
Vol 6 (20) ◽  
pp. 9411-9419 ◽  
Author(s):  
Qingfeng Zhang ◽  
Longlu Wang ◽  
Jue Wang ◽  
Xinzhi Yu ◽  
Junmin Ge ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Electrode Material ◽  
High Performance ◽  
High Surface ◽  
Volume Ratio ◽  
Lithium Ion ◽  
Diffusion Path ◽  
Molybdenum Sulfide ◽  
Two Dimensional

The ultrathin thickness and lateral morphology of a two dimensional (2D) MoS2 nanosheet contribute to its high surface-to-volume ratio and short diffusion path, rendering it a brilliant electrode material for lithium-ion batteries (LIBs).

scholarly journals Direct Growth of Copper Oxide Films on Ti Substrate for Nonenzymatic Glucose Sensors

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Xiaoxu Ji ◽  
Aihua Wang ◽  
Qinghuai Zhao
Keyword(s):  
Copper Oxide ◽  
Glucose Sensor ◽  
Low Cost ◽  
High Sensitivity ◽  
Fast Response ◽  
Glucose Sensors ◽  
Electrochemical Performances ◽  
Nonenzymatic Glucose Sensor ◽  
Long Term Stability ◽  
Direct Growth

Copper oxide (CuO) films directly grown on Ti substrate have been successfully prepared via a hydrothermal method and used to construct an amperometric nonenzymatic glucose sensor. XRD and SEM were used to characterize the samples. The electrochemical performances of the electrode for detection of glucose were investigated by cyclic voltammetry and chronoamperometry. The CuO films based glucose sensors exhibit enhanced electrocatalytic properties which show very high sensitivity (726.9 μA mM−1 cm−2), low detection limit (2 μM), and fast response (2 s). In addition, reproducibility and long-term stability have been observed. Low cost, convenience, and biocompatibility make the CuO films directly grown on Ti substrate electrodes a promising platform for amperometric nonenzymatic glucose sensor.

scholarly journals Non-Enzymatic Amperometric Glucose Screen-Printed Sensors Based on Copper and Copper Oxide Particles

2021 ◽  
Vol 11 (22) ◽  
pp. 10830
Author(s):  
Carlota Guati ◽  
Lucía Gomez-Coma ◽  
Marcos Fallanza ◽  
Inmaculada Ortiz
Keyword(s):  
Copper Oxide ◽  
Glucose Sensor ◽  
Glucose Sensors ◽  
Operating Life ◽  
Response Range ◽  
Relative Standard ◽  
Printed Sensors ◽  
Oxide Particles ◽  
Coexisting Species ◽  
Linear Response Range

Non-enzymatic amperometric glucose sensors have gained much attention in the past decade because of the better chemical and thermal stability and biocompatibility compared to conventional sensors based on the use of biomolecules. This study focuses on a novel copper and copper oxide-based glucose sensor synthesized by an electrodeposition technique through a rigorous protocol which reports an excellent analytical performance due to its structure and its increased active area. In addition, the linear response range, detection limit and sensitivity were 0.5–5.0 mmol L−1, 0.002 mmol L−1, 904 μA mmol−1 L−1 cm−2, respectively. Results show a reliable electrode as it is chemically stable, exhibits rapid and excellent sensitivity, and it is not significantly affected by coexisting species present in the blood samples; furthermore, it reports a maximum relative standard deviation error (RSD) of 6%, and showed long operating life as the electrode was used for thousand measurements of 4.0 mmol L−1 glucose solution during three days.

Electrospun porous hybrid CuO/CdO nanofibers using carboxylic-functionalized poly(arylene ether ketone)s as a template for glucose determination

2018 ◽  
Vol 31 (5) ◽  
pp. 570-579 ◽  
Author(s):  
Yongpeng Wang ◽  
Mengzhu Liu ◽  
Dayong Lu ◽  
Haibo Zhang
Keyword(s):  
Metal Ions ◽  
High Performance ◽  
Cadmium Oxide ◽  
Volume Ratio ◽  
X Ray ◽  
Glucose Determination ◽  
Ion Exchange Reaction ◽  
Arylene Ether ◽  
Ether Ketone ◽  
Porous Morphology

As a high performance polymer, PCA-poly(arylene ether ketone) (PAEK) was first used as a template to fabricate hybrid copper oxide (CuO)/cadmium oxide (CdO) nanofibers (NFs) via electrospinning and subsequent calcination. Porous NFs with a mean diameter of 463 nm were obtained. The formation of morphology was decided by the ion exchange reaction between the functional groups on polymer template and metal ions, which was proved by Fourier transform infrared spectra. Energy-dispersive X-ray spectrometer and X-ray powder diffractometry spectra demonstrated the obtained substance was CuO/CdO compound. The products were then investigated in detail for direct electrocatalytic oxidation of glucose, which was evaluated by cyclic voltammetry and chronoamperometry. Results revealed a similar anti-interference, higher sensitive, and faster response of glucose than the fibers produced from traditional template at +0.40 V. The improved performances were ascribed to the porous morphology which increased the surface-to-volume ratio. The porous morphology was found to be decided by the immobilization of metal ions onto PCA-PAEK. In conclusion, the functional group on PCA-PAEK side chain was the decisive factor to prepare CuO/CdO NFs with special morphology and good electrooxidation performances.

Low-voltage field-emission SEM of polymeric membranes for glucose biosensors

1990 ◽  
Vol 48 (3) ◽  
pp. 860-861
Author(s):  
Lorna K. Mayo ◽  
Kenneth C. Moore ◽  
Mark A. Arnold
Keyword(s):  
Glucose Sensor ◽  
Low Voltage ◽  
Glucose Sensors ◽  
Polymeric Membranes ◽  
Artificial Endocrine Pancreas ◽  
Self Monitoring ◽  
Conducting Materials ◽  
Insulin Dependent ◽  
Living Tissues ◽  
Voltage Scanning

An implantable artificial endocrine pancreas consisting of a glucose sensor and a closed-loop insulin delivery system could potentially replace the need for glucose self-monitoring and regulation among insulin dependent diabetics. Achieving such a break through largely depends on the development of an appropriate, biocompatible membrane for the sensor. Biocompatibility is crucial since changes in the glucose sensors membrane resulting from attack by orinter action with living tissues can interfere with sensor reliability and accuracy. If such interactions can be understood, however, compensations can be made for their effects. Current polymer technology offers several possible membranes that meet the unique chemical dynamics required of a glucose sensor. Two of the most promising polymer membranes are polytetrafluoroethylene (PTFE) and silicone (Si). Low-voltage scanning electron microscopy, which is an excellent technique for characterizing a variety of polymeric and non-conducting materials, 27 was applied to the examination of experimental sensor membranes.

Construction of MnCo2O4/rGO hybrid nanostructures as promising electrode material for high‐performance pseudocapacitors

2021 ◽  
Author(s):  
Mohammad Bagher Askari ◽  
Parisa Salarizadeh ◽  
Amirkhosro Beheshti-Marnani ◽  
Sadegh Azizi ◽  
Mohammad Hassan Ramezan zadeh ◽  
...  
Keyword(s):  
Electrode Material ◽  
High Performance ◽  
Hybrid Nanostructures ◽  
Promising Electrode Material

scholarly journals Electrospun Nanofibers for Sensing and Biosensing Applications—A Review

2021 ◽  
Vol 22 (12) ◽  
pp. 6357
Author(s):  
Kinga Halicka ◽  
Joanna Cabaj
Keyword(s):  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Electrospun Nanofibers ◽  
Clinical Diagnostics ◽  
Loading Capacity ◽  
Electrospun Nanofiber ◽  
Sensing Platforms ◽  
Different Types

Sensors and biosensors have found applications in many areas, e.g., in medicine and clinical diagnostics, or in environmental monitoring. To expand this field, nanotechnology has been employed in the construction of sensing platforms. Because of their properties, such as high surface area to volume ratio, nanofibers (NFs) have been studied and used to develop sensors with higher loading capacity, better sensitivity, and faster response time. They also allow to miniaturize designed platforms. One of the most commonly used techniques of the fabrication of NFs is electrospinning. Electrospun NFs can be used in different types of sensors and biosensors. This review presents recent studies concerning electrospun nanofiber-based electrochemical and optical sensing platforms for the detection of various medically and environmentally relevant compounds, including glucose, drugs, microorganisms, and toxic metal ions.

scholarly journals Study of the geometry of open channels in a layer-bed-type microfluidic immobilized enzyme reactor

2021 ◽  
Author(s):  
Cynthia Nagy ◽  
Robert Huszank ◽  
Attila Gaspar
Keyword(s):  
Immobilized Enzyme ◽  
High Surface ◽  
Volume Ratio ◽  
Volumetric Flow Rate ◽  
Enzyme Reactor ◽  
Channel Pattern ◽  
Immobilized Enzyme Reactor ◽  
Split Flow ◽  
Parallel Streams ◽  
Enzymatic Microreactors

AbstractThis paper aims at studying open channel geometries in a layer-bed-type immobilized enzyme reactor with computer-aided simulations. The main properties of these reactors are their simple channel pattern, simple immobilization procedure, regenerability, and disposability; all these features make these devices one of the simplest yet efficient enzymatic microreactors. The high surface-to-volume ratio of the reactor was achieved using narrow (25–75 μm wide) channels. The simulation demonstrated that curves support the mixing of solutions in the channel even in strong laminar flow conditions; thus, it is worth including several curves in the channel system. In the three different designs of microreactor proposed, the lengths of the channels were identical, but in two reactors, the liquid flow was split to 8 or 32 parallel streams at the inlet of the reactor. Despite their overall higher volumetric flow rate, the split-flow structures are advantageous due to the increased contact time. Saliva samples were used to test the efficiencies of the digestions in the microreactors. Graphical abstract

scholarly journals A Review on Biosensors and Recent Development of Nanostructured Materials-Enabled Biosensors

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1109
Author(s):  
Varnakavi. Naresh ◽  
Nohyun Lee
Keyword(s):  
High Surface ◽  
Three Dimensional ◽  
Biological Response ◽  
Volume Ratio ◽  
Recent Decade ◽  
Disease Diagnosis ◽  
Electrical Signal ◽  
Detection Sensitivity ◽  
Wide Range ◽  
Color Tunability

A biosensor is an integrated receptor-transducer device, which can convert a biological response into an electrical signal. The design and development of biosensors have taken a center stage for researchers or scientists in the recent decade owing to the wide range of biosensor applications, such as health care and disease diagnosis, environmental monitoring, water and food quality monitoring, and drug delivery. The main challenges involved in the biosensor progress are (i) the efficient capturing of biorecognition signals and the transformation of these signals into electrochemical, electrical, optical, gravimetric, or acoustic signals (transduction process), (ii) enhancing transducer performance i.e., increasing sensitivity, shorter response time, reproducibility, and low detection limits even to detect individual molecules, and (iii) miniaturization of the biosensing devices using micro-and nano-fabrication technologies. Those challenges can be met through the integration of sensing technology with nanomaterials, which range from zero- to three-dimensional, possessing a high surface-to-volume ratio, good conductivities, shock-bearing abilities, and color tunability. Nanomaterials (NMs) employed in the fabrication and nanobiosensors include nanoparticles (NPs) (high stability and high carrier capacity), nanowires (NWs) and nanorods (NRs) (capable of high detection sensitivity), carbon nanotubes (CNTs) (large surface area, high electrical and thermal conductivity), and quantum dots (QDs) (color tunability). Furthermore, these nanomaterials can themselves act as transduction elements. This review summarizes the evolution of biosensors, the types of biosensors based on their receptors, transducers, and modern approaches employed in biosensors using nanomaterials such as NPs (e.g., noble metal NPs and metal oxide NPs), NWs, NRs, CNTs, QDs, and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

Sign in / Sign up

Export Citation Format

Share Document