scholarly journals Integrated measurement of intracellular proteins and transcripts in single cells

Lab on a Chip ◽  
2018 ◽  
Vol 18 (21) ◽  
pp. 3251-3262 ◽  
Author(s):  
Alexander M. Xu ◽  
Qianhe Liu ◽  
Kaitlyn L. Takata ◽  
Sarah Jeoung ◽  
Yapeng Su ◽  
...  
Keyword(s):  
Single Cell ◽  
Microfluidic Device ◽  
Single Cells ◽  
Intracellular Proteins

Single cell coupled proteomic and transcriptomic measurements are captured on a scalable microfluidic device.

A microfluidic device enabling deterministic single cell trapping and release

Lab on a Chip ◽  
2021 ◽  
Author(s):  
Huichao Chai ◽  
Yongxiang Feng ◽  
Fei Liang ◽  
Wenhui Wang
Keyword(s):  
Chemical Analysis ◽  
Single Cell ◽  
Microfluidic Device ◽  
Single Cells ◽  
Cell Isolation ◽  
Cell Trapping ◽  
Analysis Techniques ◽  
Single Cell Trapping ◽  
Single Cell Isolation ◽  
Made In

Successful single-cell isolation is a pivotal technique for subsequent biological and chemical analysis of single cells. Although significant advances have been made in single-cell isolation and analysis techniques, most passive...

scholarly journals Design and Optimizations of a High-throughput Valve-based Microfluidic Device for Single Cell Compartmentalization and Analysis

2020 ◽  
Author(s):  
Jonathan Briones ◽  
Wilfred Espulgar ◽  
Shohei Koyama ◽  
Hyota Takamatsu ◽  
Eiichi Tamiya ◽  
...  
Keyword(s):  
Protein Expression ◽  
Single Cell ◽  
Microfluidic Device ◽  
High Throughput ◽  
Single Cells ◽  
Enzymatic Assay ◽  
Fluid Exchange ◽  
Genomics And Proteomics ◽  
Sealing Pressure ◽  
Cell Compartmentalization

Abstract The need for high throughput single cell screening platforms has been increasing with advancements in genomics and proteomics to identify heterogeneity, unique cell subsets or super mutants from thousands of cells within a population. For real-time monitoring of enzyme kinetics and protein expression profiling, valve-based microfluidics or pneumatic valving that can compartmentalize single cells is advantageous by providing on-demand fluid exchange capability for several steps in assay protocol and on-chip culturing. However, this technique is throughput limited by the number of compartments in the array. Thus, one big challenge lies in increasing the number of microvalves to several thousand that can be actuated in the microfluidic device to confine enzymes and substrates in picoliter volumes. This work explores the design and optimizations done on a microfluidic platform to achieve high-throughput single cell compartmentalization as applied to single-cell enzymatic assay for protein expression quantification. Design modeling through COMSOL Multiphysics was utilized to determine the circular microvalve’s optimized parameters, which can close thousands of microchambers in an array at lower sealing pressure. Multiphysical modeling results demonstrated the relationships of geometry, valve dimensions, and sealing pressure, which were applied in the fabrication of a microfluidic device comprising of up to 5000 hydrodynamic traps and corresponding microvalves. Comparing the effects of geometry, actuation media and fabrication technique, a sealing pressure as low as 0.04 MPa was achieved. Applying to single cell enzymatic assay, variations in granzyme B activity in Jurkat and human PBMC cells were observed. Improvement in the microfluidic chip’s throughput is significant in single cell analysis applications, especially in drug discovery and treatment personalization.

scholarly journals A Microfluidic Micropipette Aspiration Device to Study Single-Cell Mechanics Inspired by the Principle of Wheatstone Bridge

Micromachines ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 131 ◽  
Author(s):  
Yong-Jiang Li ◽  
Yu-Nong Yang ◽  
Hai-Jun Zhang ◽  
Chun-Dong Xue ◽  
De-Pei Zeng ◽  
...  
Keyword(s):  
Single Cell ◽  
Microfluidic Device ◽  
Hela Cells ◽  
Cell Biology ◽  
Flow Direction ◽  
Single Cells ◽  
Wheatstone Bridge ◽  
Biomechanical Properties ◽  
Disease Diagnosis ◽  
Micropipette Aspiration

The biomechanical properties of single cells show great potential for early disease diagnosis and effective treatments. In this study, a microfluidic device was developed for quantifying the mechanical properties of a single cell. Micropipette aspiration was integrated into a microfluidic device that mimics a classical Wheatstone bridge circuit. This technique allows us not only to effectively alter the flow direction for single-cell trapping, but also to precisely control the pressure exerted on the aspirated cells, analogous to the feature of the Wheatstone bridge that can precisely control bridge voltage and current. By combining the micropipette aspiration technique into the microfluidic device, we can effectively trap the microparticles and Hela cells as well as measure the deformability of cells. The Young’s modulus of Hela cells was evaluated to be 387 ± 77 Pa, which is consistent with previous micropipette aspiration studies. The simplicity, precision, and usability of our device show good potential for biomechanical trials in clinical diagnosis and cell biology research.

scholarly journals A design and optimization of a high throughput valve based microfluidic device for single cell compartmentalization and analysis

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Jonathan Briones ◽  
Wilfred Espulgar ◽  
Shohei Koyama ◽  
Hyota Takamatsu ◽  
Eiichi Tamiya ◽  
...  
Keyword(s):  
Protein Expression ◽  
Single Cell ◽  
Microfluidic Device ◽  
High Throughput ◽  
Single Cells ◽  
Enzymatic Assay ◽  
Fluid Exchange ◽  
Genomics And Proteomics ◽  
Sealing Pressure ◽  
Cell Compartmentalization

AbstractThe need for high throughput single cell screening platforms has been increasing with advancements in genomics and proteomics to identify heterogeneity, unique cell subsets or super mutants from thousands of cells within a population. For real-time monitoring of enzyme kinetics and protein expression profiling, valve-based microfluidics or pneumatic valving that can compartmentalize single cells is advantageous by providing on-demand fluid exchange capability for several steps in assay protocol and on-chip culturing. However, this technique is throughput limited by the number of compartments in the array. Thus, one big challenge lies in increasing the number of microvalves to several thousand that can be actuated in the microfluidic device to confine enzymes and substrates in picoliter volumes. This work explores the design and optimizations done on a microfluidic platform to achieve high-throughput single cell compartmentalization as applied to single-cell enzymatic assay for protein expression quantification. Design modeling through COMSOL Multiphysics was utilized to determine the circular microvalve’s optimized parameters, which can close thousands of microchambers in an array at lower sealing pressure. Multiphysical modeling results demonstrated the relationships of geometry, valve dimensions, and sealing pressure, which were applied in the fabrication of a microfluidic device comprising of up to 5000 hydrodynamic traps and corresponding microvalves. Comparing the effects of geometry, actuation media and fabrication technique, a sealing pressure as low as 0.04 MPa was achieved. Applying to single cell enzymatic assay, variations in granzyme B activity in Jurkat and human PBMC cells were observed. Improvement in the microfluidic chip’s throughput is significant in single cell analysis applications, especially in drug discovery and treatment personalization.

In-Situ Dual Beam (FIBSEM) Techniques for Probe Pad Deposition and Dielectric Integrity Inspection in 0.2 μm Technology DRAM Single Cells

1999 ◽  
Author(s):  
Gunnar Zimmermann ◽  
Richard Chapman
Keyword(s):  
Electron Beam ◽  
Single Cell ◽  
Single Cells ◽  
Ion Beam ◽  
Gate Oxide ◽  
Ion Milling ◽  
Dual Beam ◽  
Sem Imaging ◽  
Innovative Techniques

Abstract Dual beam FIBSEM systems invite the use of innovative techniques to localize IC fails both electrically and physically. For electrical localization, we present a quick and reliable in-situ FIBSEM technique to deposit probe pads with very low parasitic leakage (Ipara < 4E-11A at 3V). The probe pads were Pt, deposited with ion beam assistance, on top of highly insulating SiOx, deposited with electron beam assistance. The buried plate (n-Band), p-well, wordline and bitline of a failing and a good 0.2 μm technology DRAM single cell were contacted. Both cells shared the same wordline for direct comparison of cell characteristics. Through this technique we electrically isolated the fail to a single cell by detecting leakage between the polysilicon wordline gate and the cell diffusion. For physical localization, we present a completely in-situ FIBSEM technique that combines ion milling, XeF2 staining and SEM imaging. With this technique, the electrically isolated fail was found to be a hole in the gate oxide at the bad cell.

scholarly journals Visually precise, low-damage, single-cell spatial manipulation with single-pixel resolution

2021 ◽  
Vol 12 (11) ◽  
pp. 4111-4118
Author(s):  
Qi Zhang ◽  
Yunlong Shao ◽  
Boye Li ◽  
Yuanyuan Wu ◽  
Jingying Dong ◽  
...  
Keyword(s):  
Single Cell ◽  
Single Cells ◽  
Pixel Resolution ◽  
Single Pixel

We achieved the low-damage spatial puncture of single cells at specific visual points with an accuracy of <65 nm.

scholarly journals Single cell transcriptome atlas of mouse mammary epithelial cells across development

2021 ◽  
Vol 23 (1) ◽  
Author(s):  
Bhupinder Pal ◽  
Yunshun Chen ◽  
Michael J. G. Milevskiy ◽  
François Vaillant ◽  
Lexie Prokopuk ◽  
...  
Keyword(s):  
Epithelial Cells ◽  
Single Cell ◽  
Developmental Stages ◽  
Mammary Epithelial Cells ◽  
Expression Profiles ◽  
Single Cells ◽  
Chromatin Accessibility ◽  
Mammary Epithelial ◽  
Cell Transcriptome ◽  
Single Cell Transcriptome

Abstract Background Heterogeneity within the mouse mammary epithelium and potential lineage relationships have been recently explored by single-cell RNA profiling. To further understand how cellular diversity changes during mammary ontogeny, we profiled single cells from nine different developmental stages spanning late embryogenesis, early postnatal, prepuberty, adult, mid-pregnancy, late-pregnancy, and post-involution, as well as the transcriptomes of micro-dissected terminal end buds (TEBs) and subtending ducts during puberty. Methods The single cell transcriptomes of 132,599 mammary epithelial cells from 9 different developmental stages were determined on the 10x Genomics Chromium platform, and integrative analyses were performed to compare specific time points. Results The mammary rudiment at E18.5 closely aligned with the basal lineage, while prepubertal epithelial cells exhibited lineage segregation but to a less differentiated state than their adult counterparts. Comparison of micro-dissected TEBs versus ducts showed that luminal cells within TEBs harbored intermediate expression profiles. Ductal basal cells exhibited increased chromatin accessibility of luminal genes compared to their TEB counterparts suggesting that lineage-specific chromatin is established within the subtending ducts during puberty. An integrative analysis of five stages spanning the pregnancy cycle revealed distinct stage-specific profiles and the presence of cycling basal, mixed-lineage, and 'late' alveolar intermediates in pregnancy. Moreover, a number of intermediates were uncovered along the basal-luminal progenitor cell axis, suggesting a continuum of alveolar-restricted progenitor states. Conclusions This extended single cell transcriptome atlas of mouse mammary epithelial cells provides the most complete coverage for mammary epithelial cells during morphogenesis to date. Together with chromatin accessibility analysis of TEB structures, it represents a valuable framework for understanding developmental decisions within the mouse mammary gland.

scholarly journals SUGAR-seq enables simultaneous detection of glycans, epitopes, and the transcriptome in single cells

2021 ◽  
Vol 7 (8) ◽  
pp. eabe3610
Author(s):  
Conor J. Kearney ◽  
Stephin J. Vervoort ◽  
Kelly M. Ramsbottom ◽  
Izabela Todorovski ◽  
Emily J. Lelliott ◽  
...  
Keyword(s):  
Single Cell ◽  
Posttranslational Modification ◽  
Cellular Differentiation ◽  
Single Cells ◽  
Simultaneous Detection ◽  
Surface Protein ◽  
Rna Seq ◽  
Cell Level ◽  
Simultaneous Integration ◽  
Unique Surface

Multimodal single-cell RNA sequencing enables the precise mapping of transcriptional and phenotypic features of cellular differentiation states but does not allow for simultaneous integration of critical posttranslational modification data. Here, we describe SUrface-protein Glycan And RNA-seq (SUGAR-seq), a method that enables detection and analysis of N-linked glycosylation, extracellular epitopes, and the transcriptome at the single-cell level. Integrated SUGAR-seq and glycoproteome analysis identified tumor-infiltrating T cells with unique surface glycan properties that report their epigenetic and functional state.

scholarly journals Nanopore sequencing of single-cell transcriptomes with scCOLOR-seq

2021 ◽  
Author(s):  
Martin Philpott ◽  
Jonathan Watson ◽  
Anjan Thakurta ◽  
Tom Brown ◽  
Tom Brown ◽  
...  
Keyword(s):  
Single Cell ◽  
Error Detection ◽  
Single Cells ◽  
Fusion Transcript ◽  
Building Blocks ◽  
Myeloma Cell ◽  
Nanopore Sequencing ◽  
Long Read ◽  
Unique Molecular Identifier ◽  
Transcript Detection

AbstractHere we describe single-cell corrected long-read sequencing (scCOLOR-seq), which enables error correction of barcode and unique molecular identifier oligonucleotide sequences and permits standalone cDNA nanopore sequencing of single cells. Barcodes and unique molecular identifiers are synthesized using dimeric nucleotide building blocks that allow error detection. We illustrate the use of the method for evaluating barcode assignment accuracy, differential isoform usage in myeloma cell lines, and fusion transcript detection in a sarcoma cell line.

Sign in / Sign up

Export Citation Format

Share Document