scholarly journals Large-scale fabrication of free-standing and sub-μm PDMS through-hole membranes

Nanoscale ◽  
2018 ◽  
Vol 10 (16) ◽  
pp. 7711-7718 ◽  
Author(s):  
Hai Le-The ◽  
Martijn Tibbe ◽  
Joshua Loessberg-Zahl ◽  
Marciano Palma do Carmo ◽  
Marinke van der Helm ◽  
...  

A robust and simple method was developed for large-scale fabrication of free-standing and sub-μm PDMS through-hole membranes for biomedical applications.

2019 ◽  
Vol 5 (1) ◽  
pp. 97-106
Author(s):  
Rudi Budi Agung ◽  
Muhammad Nur ◽  
Didi Sukayadi

The Indonesian country which is famous for its tropical climate has now experienced a shift in two seasons (dry season and rainy season). This has an impact on cropping and harvesting systems among farmers. In large scale this is very influential considering that farmers in Indonesia are stilldependent on rainfall which results in soil moisture. Some types of plants that are very dependent on soil moisture will greatly require rainfall or water for growth and development. Through this research, researchers tried to make a prototype application for watering plants using ATMEGA328 microcontroller based soil moisture sensor. Development of application systems using the prototype method as a simple method which is the first step and can be developed again for large scale. The working principle of this prototype is simply that when soil moisture reaches a certainthreshold (above 56%) then the system will work by activating the watering system, if it is below 56% the system does not work or in other words soil moisture is considered sufficient for certain plant needs.


Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3808 ◽  
Author(s):  
Blazej Podlesny ◽  
Bogumila Kumanek ◽  
Angana Borah ◽  
Ryohei Yamaguchi ◽  
Tomohiro Shiraki ◽  
...  

Single-walled carbon nanotubes (SWCNTs) remain one of the most promising materials of our times. One of the goals is to implement semiconducting and metallic SWCNTs in photonics and microelectronics, respectively. In this work, we demonstrated how such materials could be obtained from the parent material by using the aqueous two-phase extraction method (ATPE) at a large scale. We also developed a dedicated process on how to harvest the SWCNTs from the polymer matrices used to form the biphasic system. The technique is beneficial as it isolates SWCNTs with high purity while simultaneously maintaining their surface intact. To validate the utility of the metallic and semiconducting SWCNTs obtained this way, we transformed them into thin free-standing films and characterized their thermoelectric properties.


2015 ◽  
Vol 51 (91) ◽  
pp. 16381-16384 ◽  
Author(s):  
Yuelong Xin ◽  
Liya Qi ◽  
Yiwei Zhang ◽  
Zicheng Zuo ◽  
Henghui Zhou ◽  
...  

A novel organic solvent-assisted freeze-drying pathway, which can effectively protect and uniformly distribute active particles, is developed to fabricate a free-standing Li2MnO3·LiNi1/3Co1/3Mn1/3O2 (LR)/rGO electrode on a large scale.


Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.


Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1269
Author(s):  
Gareth Sheppard ◽  
Karl Tassenberg ◽  
Bogdan Nenchev ◽  
Joel Strickland ◽  
Ramy Mesalam ◽  
...  

In tissue engineering, scaffolds are a key component that possess a highly elaborate pore structure. Careful characterisation of such porous structures enables the prediction of a variety of large-scale biological responses. In this work, a rapid, efficient, and accurate methodology for 2D bulk porous structure analysis is proposed. The algorithm, “GAKTpore”, creates a morphology map allowing quantification and visualisation of spatial feature variation. The software achieves 99.6% and 99.1% mean accuracy for pore diameter and shape factor identification, respectively. There are two main algorithm novelties within this work: (1) feature-dependant homogeneity map; (2) a new waviness function providing insights into the convexity/concavity of pores, important for understanding the influence on cell adhesion and proliferation. The algorithm is applied to foam structures, providing a full characterisation of a 10 mm diameter SEM micrograph (14,784 × 14,915 px) with 190,249 pores in ~9 min and has elucidated new insights into collagen scaffold formation by relating microstructural formation to the bulk formation environment. This novel porosity characterisation algorithm demonstrates its versatility, where accuracy, repeatability, and time are paramount. Thus, GAKTpore offers enormous potential to optimise and enhance scaffolds within tissue engineering.


2007 ◽  
Vol 352 ◽  
pp. 297-300
Author(s):  
Toshikazu Akahori ◽  
Mitsuo Niinomi ◽  
Masaaki Nakai

Titanium and its alloys have been widely used as biomaterials for hard tissue replacements because of their excellent mechanical properties and biocompatibility. However, the bonding between their surfaces and bone is not enough after implantation. The bioactive surface modification such as a hydroxyapatite (HAp) coating on their surfaces has been investigated. Recently, a simple method for forming HAp layer on the surfaces of titanium and its alloys has been developed. This method is called as alkaline treatment process. In this method, HAp deposits on the surfaces of titanium and its alloys by dipping into simulated body fluid (SBF) after an alkaline solution treatment that is followed by a baking treatment (alkaline treatment). This process is applicable to newly developed beta-type Ti-29Nb-13Ta-4.6Zr alloy (TNTZ) for biomedical applications achieving bioactive HAp modification. In this study, the morphology of the HAp layer formed on the surface of TNTZ was investigated after various alkaline treatments followed by dipping in SBF. The formability of HAp on the surface of TNTZ was then discussed. The formability of HAp on TNTZ is much lower than that of commercially pure Ti, Ti-6Al-4V ELI and Ti-15Mo-5Zr-3Al alloys, which are representative metallic biomaterials. The formability of HAp on TNTZ is improved by increasing the amount of Na in the sodium titanate gels formed during an alkaline solution treatment where the NaOH concentrations and the dipping time are over 5 M and 172.8 ks, respectively. The formability of HAp on TNTZ is considerably improved by dipping in a 5 M NaOH solution for 172.8 ks. This condition for alkaline solution treatment process is the most suitable for TNTZ.


2016 ◽  
Vol 13 (12) ◽  
pp. 1224-1229 ◽  
Author(s):  
Daniela Pignatelli ◽  
Eloisa Sardella ◽  
Fabio Palumbo ◽  
Chiara Lo Porto ◽  
Silvia Taccola ◽  
...  

2021 ◽  
Author(s):  
Xunliang Hu ◽  
Irshad Hussain ◽  
Bien Tan

Abstract Covalent triazine frameworks (CTFs) have recently been demonstrated as promising materials for photocatalytic water splitting and are usually used in the form of suspended powder. From a practical point of view, immobilized CTFs materials are more suitable for large-scale water splitting applications, owing to their convenient separation and recycling potential. However, existing synthetic approaches mainly result in insoluble and unprocessable powders, which makes their future device application still a huge challenge. Herein, we report an aliphatic amine-assisted interfacial polymerization method to obtain free-standing, crystalline CTFs film with excellent photoelectric performance. The lateral size of the film was up to 250 cm2, the average thickness can be regulated from 30-500 nm. The crystalline structure was confirmed by high-resolution transmission electron microscope (HR-TEM), powder X-ray diffraction (PXRD), and small-angle X-ray scattering (SAXS) analysis. Intrigued by the good light absorption, crystalline structure, and big lateral size of the film, it was immobilized on a glass support that exhibited good photocatalytic hydrogen evolution performance (5.4 mmol h-1 m-2) and was easy to recycle.


2021 ◽  
Author(s):  
Hamed Khorasani ◽  
Zhenduo Zhu

<p>Phosphorus (P) is the key and limiting nutrient in the eutrophication of freshwater resources. Modeling P retention in lakes using steady-state mass balance models (i.e. Vollenweider-type models) provides insights into the lake P management and a simple method for large-scale assessments of P in lakes. One of the basic problems in the mass balance modeling of P in lakes is the removal of P from the lake water column by settling. A fraction of the incoming P into the lake from the watershed is associated with fast-settling particles (e.g. sediment particles) that result in the removal of that fraction of P quickly at the lake entrance. However, existing models considering a constant fraction of fast-settling TP for all lakes are shown to result in overestimation of the retention of P in lakes with short hydraulic residence time. In this study, we combine a hypothesis of the fast- and slow-settling P fractions into the steady-state mass balance models of P retention in lakes. We use a large database of lakes to calibrate the model and evaluate the hypothesis. The results of this work can be used for the improvement of the prediction power of P retention models in lakes and help to better understand the processes of P cycling in lakes.</p>


Sign in / Sign up

Export Citation Format

Share Document