Hydrothermal-assisted synthesis of an iron nitride–carbon composite as a novel electrode material for supercapacitors

2017 ◽  
Vol 5 (12) ◽  
pp. 5680-5684 ◽  
Author(s):  
Agata Śliwak ◽  
Adam Moyseowicz ◽  
Grażyna Gryglewicz
Keyword(s):  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Carbon Composite ◽  
Iron Nitride

Hydrothermal-assisted impregnation followed by NH3 annealing resulted in the fabrication of a novel iron nitride–carbon hybrid as an electrode material with a remarkable specific capacitance of 525 F g−1 for high-performance supercapacitors.

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

Hierarchical carbon composite nanofibrous electrode material for high-performance aqueous supercapacitors

2018 ◽  
Vol 214 ◽  
pp. 557-563 ◽  
Author(s):  
Alex Aboagye ◽  
Yiyang Liu ◽  
James G. Ryan ◽  
Jianjun Wei ◽  
Lifeng Zhang
Keyword(s):  
Electrode Material ◽  
High Performance ◽  
Carbon Composite ◽  
Hierarchical Carbon

One-step synthesis and electrochemical performance of a PbMoO4/CdMoO4 composite as an electrode material for high-performance supercapacitor applications

2019 ◽  
Vol 48 (28) ◽  
pp. 10652-10660 ◽  
Author(s):  
Tarugu Anitha ◽  
Araveeti Eswar Reddy ◽  
Yedluri Anil Kumar ◽  
Young-Rae Cho ◽  
Hee-Je Kim
Keyword(s):  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Cycling Stability ◽  
One Step ◽  
Supercapacitor Applications

A bunch of PbMoO4/CdMoO4 nanocube-like structures exhibit superior specific capacitance and cycling stability to PbMoO4 and CdMoO4 electrodes.

Nitrogen-Enriched Reduced Graphene Oxide for High Performance Supercapacitor Electrode

2020 ◽  
Vol 20 (8) ◽  
pp. 4854-4859 ◽  
Author(s):  
Lei Chen ◽  
Xu Chen ◽  
Yaqiong Wen ◽  
Bixia Wang ◽  
Yangchen Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Specific Capacitance ◽  
Reduced Graphene Oxide ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Electrochemical Impedance ◽  
Oxide Electrode ◽  
Reduced Graphene

Nitrogen-enriched reduced graphene oxide electrode material can be successfully prepared through a simple hydrothermal method. The morphology and microstructure of ready to use electrode material is measured by field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD). Physical characterizations revealed that nitrogen-enriched reduced graphene oxide electrode material possessed high specific surface area of 429.6 m2 · g−1, resulting in high utilization of electrode materials with electrolyte. Electrochemical performance of nitrogen-enriched reduced graphene oxide electrode was also investigated by cyclic voltammetry (CV), galvanostatic charge/discharge measurements and electrochemical impedance spectroscopy (EIS) in aqueous in 6 M KOH with a three-electrode system, which displayed a high specific capacitance about 223.5 F · g−1 at 1 mV · s−1. More importantly, nitrogenenriched reduced graphene oxide electrode exhibited outstanding stability with 100% coulombic efficiency and with no specific capacitance loss under 2 A · g−1 after 10000 cycles. The supercapacitive behaviors indicated that nitrogen-enriched reduced graphene oxide can be a used as a promising electrode for high-performance super-capacitors.

Flower-like ZnO@MnCo2O4 nanosheet structures on nickel foam as novel electrode material for high-performance supercapacitors

RSC Advances ◽  
2016 ◽  
Vol 6 (105) ◽  
pp. 102961-102967 ◽  
Author(s):  
Chandu V. V. M. Gopi ◽  
Mallineni Venkata-Haritha ◽  
Soo-Kyoung Kim ◽  
Kandasamy Prabakar ◽  
Hee-Je Kim
Keyword(s):  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance

The flower-like ZnO@MnCo2O4 nanosheet electrode exhibited high specific capacitance than dandelion-like MnCo2O4.

Partially Graphitized Iron-Carbon Hybrid Composite as Electrochemical Supercapacitor Material

2020 ◽  
Author(s):  
Sai Rashmi M. ◽  
Ashish Singh ◽  
Chandra sekhar Rout ◽  
Akshaya Samal ◽  
Manav Saxena
Keyword(s):  
Iron Oxide ◽  
Current Density ◽  
Electrode Material ◽  
High Performance ◽  
Electrode Materials ◽  
Carbon Composite ◽  
X Ray ◽  
Transmission Electron ◽  
Excellent Property ◽  
A Current

<p>The conversion of biomass into valuable carbon composites as an efficient non-precious energy storage electrode material have elicited extensive research interest. As synthesized partially graphitized iron oxide-carbon composite material (Fe<sub>3</sub>O<sub>4</sub>/Fe<sub>3</sub>C@C) shows an excellent property as an electrode material for supercapacitor. X-ray diffraction, High resolution transmission electron microscopy, X-ray photo-electron spectroscopy and Brunauer-Emmett-Teller analysis is used to study the structural, compositional and surface areal properties. The electrode material shows a specific surface area of 827.4 m<sup>2</sup>/g. Due to the synergistic effect of graphitic layers with iron oxide/carbide, Fe<sub>3</sub>O<sub>4</sub>/Fe<sub>3</sub>C@C hybrid electrode materials display high-performance for supercapacitor with excellent capacity of 878 F/g at a current density of 5A/g (3-electrode) and 211.6 F/g at a current density of 0.4A/g (2-electrode) in 6M KOH electrolyte with good cyclic stability.</p>

scholarly journals Hierarchically porous N-doped carbon derived from supramolecular assembled polypyrrole as a high performance supercapacitor electrode material

RSC Advances ◽  
2018 ◽  
Vol 8 (33) ◽  
pp. 18714-18722 ◽  
Author(s):  
Li Lai ◽  
Yu Zhao ◽  
Shu Ying ◽  
Lanlan Li ◽  
Zhong Ma ◽  
...  
Keyword(s):  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Supercapacitor Electrode ◽  
Hierarchically Porous

Hierarchically porous N-doped carbon with optimized morphology exhibits an enhanced specific capacitance of 435.6 F g−1 at 0.5 A g−1 and 96.1% capacitance retention after 5000 cycles in 1 M H2SO4.

Synthesis of hierarchically porous MnO2/rice husks derived carbon composite as high-performance electrode material for supercapacitors

2016 ◽  
Vol 178 ◽  
pp. 260-268 ◽  
Author(s):  
Chuanjun Yuan ◽  
Haibo Lin ◽  
Haiyan Lu ◽  
Endong Xing ◽  
Yusi Zhang ◽  
...  
Keyword(s):  
Electrode Material ◽  
High Performance ◽  
Carbon Composite ◽  
Rice Husks ◽  
Hierarchically Porous

A novel Cr 2 O 3 -carbon composite as a high performance pseudo-capacitor electrode material

2015 ◽  
Vol 171 ◽  
pp. 142-149 ◽  
Author(s):  
Shaheed Ullah ◽  
Inayat Ali Khan ◽  
Mohammad Choucair ◽  
Amin Badshah ◽  
Ishtiaq Khan ◽  
...  
Keyword(s):  
Electrode Material ◽  
High Performance ◽  
Carbon Composite
Sign in / Sign up

Export Citation Format

Share Document