Observation of the effects of Bi-deficiency on ferroelectric and electrical properties in Bi(1+x)FeO3/La0.65Sr0.35MnO3 heterostructures via atomic force microscopy

RSC Advances ◽  
2016 ◽  
Vol 6 (116) ◽  
pp. 115039-115045 ◽  
Author(s):  
Qing Liu ◽  
Jieling Zhang ◽  
Ling Wei ◽  
Weifeng Zhang
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Electrical Properties ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Force Microscopy ◽  
Atomic Force

Bi(1+x)FeO3 thin films with different Bi contents (x = 0%, 5%, and 10%) were grown on (001) SrTiO3 substrates with La0.65Sr0.35MnO3 (LSMO) buffered layers via pulsed laser deposition.

scholarly journals Combined pulsed laser deposition and non-contact atomic force microscopy system for studies of insulator metal oxide thin films

2018 ◽  
Vol 9 ◽  
pp. 686-692 ◽  
Author(s):  
Daiki Katsube ◽  
Hayato Yamashita ◽  
Satoshi Abo ◽  
Masayuki Abe
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Metal Oxide ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Film Surface ◽  
Laser Deposition ◽  
Combined System ◽  
Force Microscopy ◽  
Atomic Force

We have designed and developed a combined system of pulsed laser deposition (PLD) and non-contact atomic force microscopy (NC-AFM) for observations of insulator metal oxide surfaces. With this system, the long-period iterations of sputtering and annealing used in conventional methods for preparing a metal oxide film surface are not required. The performance of the combined system is demonstrated for the preparation and high-resolution NC-AFM imaging of atomically flat thin films of anatase TiO2(001) and LaAlO3(100).

Cross-Sectional Nanoindentation of Alumina Thin Films Deposited by Pulsed Laser Deposition Process

2006 ◽  
Author(s):  
Sudheer Neralla ◽  
Sergey Yarmolenko ◽  
Dhananjay Kumar ◽  
Devdas Pai ◽  
Jag Sankar
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
High Hardness ◽  
Deposition Process ◽  
Laser Deposition ◽  
Cross Sectional ◽  
Adhesion Properties ◽  
Force Microscopy ◽  
Atomic Force

Alumina is a widely used ceramic material due to its high hardness, wear resistance and dielectric properties. The study of phase transformation and its correlation to the mechanical properties of alumina is essential. In this study, interfacial adhesion properties of alumina thin films are studied using cross-sectional nanoindentation (CSN) technique. Alumina thin films are deposited at 200 and 700 °C, on Si (100) substrates with a weak Silica interface, using pulsed laser deposition (PLD) process. Effect of annealing on the surface morphology of the thin films is studied using atomic force microscopy. Xray diffraction studies revealed that alumina thin films are amorphous in nature at 200 °C and polycrystalline with predominant gamma alumina phase at 700 °C.

Influence of Post Growth Annealing on the Optical Properties of Gallium Nitride Films Grown by Pulsed Laser Deposition

2012 ◽  
Vol 1432 ◽  
Author(s):  
M. Baseer Haider ◽  
M. F. Al-Kuhaili ◽  
S. M. A. Durrani ◽  
Imran Bakhtiari
Keyword(s):  
Thin Films ◽  
Gallium Nitride ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Nitrogen Atmosphere ◽  
Laser Deposition ◽  
Optical Measurements ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

Abstract:Gallium nitride thin films were grown by pulsed laser deposition. Subsequently, post-growth annealing of the samples was performed at 400, and 600 oC in the nitrogen atmosphere. Surface morphology of the as-grown and annealed samples was performed by atomic force microscopy, surface roughness of the films improved after annealing. Chemical analysis of the samples was performed using x-ray photon spectroscopy, stoichiometric Gallium nitride thin films were obtained for the samples annealed at 600 oC. Optical measurements of the samples were performed to investigate the effect of annealing on the band gap and optical constants the films.

Stability and Structural Characterization of Epitaxial NdNiO3 Films Grown by Pulsed Laser Deposition

2000 ◽  
Vol 658 ◽  
Author(s):  
Trong-Duc Doan ◽  
Cobey Abramowski ◽  
Paul A. Salvador
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Substrate Surface ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Atomic Force ◽  
Monoclinic Distortion

ABSTRACTThin films of NdNiO3 were grown using pulsed laser deposition on single crystal substrates of [100]-oriented LaAlO3 and SrTiO3. X-ray diffraction and reflectivity, scanning electron microscopy, and atomic force microscopy were used to characterize the chemical, morphological and structural traits of the thin films. Single-phase epitaxial films are grown on LaAlO3 and SrTiO3 at 625°C in an oxygen pressure of 200 mTorr. At higher temperatures, the films partially decompose to Nd2NiO4 and NiO. The films are epitaxial with the (101) planes (orthorhombic Pnma notation) parallel to the substrate surface. Four in-plane orientational variants exist that correspond to the four 90° degenerate orientations of the film's [010] with respect to the in-plane substrate directions. Films are observed to be strained in accordance with the structural mismatch to the underlying substrate, and this leads, in the thinnest films on LaAlO3, to an apparent monoclinic distortion to the unit cell.

Atomic Force Microscopy Study of Hard Coating Films Prepared by Pulsed Laser Deposition Method

1996 ◽  
Vol 441 ◽  
Author(s):  
Hsieh-Li Chan ◽  
Ashok Kumar ◽  
L. Sanderson ◽  
J. J. Weimer
Keyword(s):  
Thin Film ◽  
Atomic Force Microscopy ◽  
Pulsed Laser Deposition ◽  
Room Temperature ◽  
High Vacuum ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Force Microscopy ◽  
Atomic Force ◽  
Different Temperatures

AbstractAluminum nitride (AIN), silicon nitride (Si3N4), and silicon carbide (SIC) thin films have been snthesized using pulsed laser deposition (PLD) techniques. AIN and Si3N4 films were deposited on Si (100) substrates at different temperatures (room temperature to 600°C) and partial pressures (15 mTorr N2 to 200 mTorr N2). SiC films were deposited on Si (100) substrates at different temperatures (room temperature to 400°C) in high vacuum. The atomic force microscopy (AFM) is a useful tool for studying the surface topography of these technologically interesting thin film surfaces. This paper discusses in detail AFM analysis of thin film coatings.

scholarly journals Imaging pulsed laser deposition oxide growth by in situ atomic force microscopy

2017 ◽  
Vol 88 (12) ◽  
pp. 123902 ◽  
Author(s):  
W. A. Wessels ◽  
T. R. J. Bollmann ◽  
D. Post ◽  
G. Koster ◽  
G. Rijnders
Keyword(s):  
Atomic Force Microscopy ◽  
Pulsed Laser Deposition ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Oxide Growth ◽  
Force Microscopy ◽  
Atomic Force

The Structural and Morphology of (La0.7Sr0.3)MnO3 Thin Films Prepared by Pulsed Laser Deposition

2010 ◽  
Vol 150-151 ◽  
pp. 908-911 ◽  
Author(s):  
Wei Rao ◽  
Jun Yu
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Photoelectron Spectroscopy ◽  
Perovskite Phase ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

(La0.7Sr0.3)MnO3 (LSMO) thin films were prepared on Si (100) substrate by pulsed laser deposition (PLD). Both structure and surface morphology of the films were investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM). Furthermore, the chemical states and chemical composition of the films were determined by X-ray photoelectron spectroscopy (XPS) near the surface. The results indicate that the films grown on Si (100) substrates have a single pseudo cubic perovskite phase structure with a high (100) orientation. The XPS results show that La, Sr and Mn exist mainly in the forms of perovskite structure and a SrO layer was found on outermost surface.

X-Ray Photoelectron Spectroscopy of (La0.7Sr0.3)MnO3Thin Films Prepared by Pulsed Laser Deposition

2011 ◽  
Vol 284-286 ◽  
pp. 2191-2197 ◽  
Author(s):  
Hui Fang Xiong ◽  
Tie Dong Cheng ◽  
X.G. Tang ◽  
Jian Chen ◽  
Qiu Xiang Liu
Keyword(s):  
Thin Films ◽  
Pulsed Laser Deposition ◽  
Photoelectron Spectroscopy ◽  
Perovskite Phase ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
X Ray Diffraction ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force

(La0.7Sr0.3)MnO3 (LSMO) thin films were grown on Si (100) substrate by using pulsed laser deposition (PLD) process. Both structure and surface morphology of the films were investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM). Furthermore, the chemical states and chemical composition of the films were determined by X-ray photoelectron spectroscopy (XPS) near the surface. From XRD, the results indicate that the films grown on Si (100) substrates have a single pseudocubic perovskite phase structure with a high (100) orientation. The XPS results show that La, Sr and Mn exist mainly in the forms of perovskite structure and a SrO layer was found on outermost surface. The films resistivity emeasured under room temperature is 6.4´10-4 W×cm.

Sign in / Sign up

Export Citation Format

Share Document