Mineralization of ammunition wastewater by a micron-size Fe0/O3 process (mFe0/O3)

RSC Advances ◽  
2016 ◽  
Vol 6 (61) ◽  
pp. 55726-55735 ◽  
Author(s):  
Zhaokun Xiong ◽  
Yue Yuan ◽  
Bo Lai ◽  
Ping Yang ◽  
Yuexi Zhou
Keyword(s):  
Flow Rate ◽  
Batch Experiments ◽  
Operational Parameters ◽  
Micron Size ◽  
Initial Ph ◽  
Set Up

A micron-size Fe0/O3 process (mFe0/O3) was set up to mineralize the pollutants in ammunition wastewater, and its key operational parameters (e.g., initial pH, ozone flow rate, and mFe0 dosage) were optimized by the batch experiments, respectively.

scholarly journals New Composite Sorbent for Removal of Sulfate Ions from Simulated and Real Groundwater in the Batch and Continuous Tests

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4356
Author(s):  
Waqed Hassan ◽  
Ayad Faisal ◽  
Enas Abed ◽  
Nadhir Al-Ansari ◽  
Bahaa Saleh
Keyword(s):  
Flow Rate ◽  
Permeable Reactive Barrier ◽  
Molar Ratio ◽  
Composite Sorbent ◽  
Sulfate Ions ◽  
Reactive Barrier ◽  
Time Period ◽  
Initial Ph ◽  
Scrap Iron ◽  
Set Up

The evaluation of groundwater quality in the Dammam formation, Faddak farm, Karbala Governorate, Iraq proved that the sulfate (SO42−) concentrations have high values; so, this water is not suitable for livestock, poultry and irrigation purposes. For reclamation of this water, manufacturing of new sorbent for permeable reactive barrier was required through precipitation of Mg and Fe hydroxides nanoparticles on the activated carbon (AC) surface with best Mg/Fe molar ratio of 7.5/2.5. Mixture of 50% coated AC and 50% scrap iron was applied to eliminate SO42− from contaminated water with efficiency of 59% and maximum capacity of adsorption equals to 9.5 mg/g for a time period of 1 h, sorbent dosage 40 g/L, and initial pH = 5 at 50 mg/L initial SO42− concentration and 200 rpm shaking speed. Characterization analyses certified that the plantation of Mg and Fe nanoparticles onto AC was achieved. Continuous tests showed that the longevity of composite sorbent is increased with thicker bed and lower influent concentration and flow rate. Computer solution (COMSOL) software was well simulated for continuous measurements. The reclamation of real contaminated groundwater was achieved in column set-up with efficiency of 70% when flow rate was 5 mL/min, bed depth was 50 cm and inlet SO42− concentration was 2301 mg/L.

On the Influence of the Slot Orifice in Diesel Common Rail Nozzle

2018 ◽  
Vol 11 (1) ◽  
pp. 55-69 ◽  
Author(s):  
Giancarlo Chiatti ◽  
Ornella Chiavola ◽  
Fulvio Palmieri ◽  
Roberto Pompei
Keyword(s):  
Cross Section ◽  
Flow Rate ◽  
Experimental Analysis ◽  
Common Rail ◽  
Spray Angle ◽  
The Novel ◽  
Hydraulic Behavior ◽  
Reference Information ◽  
Light Duty ◽  
Set Up

Background:The paper deals with a diesel common rail nozzle in which a novel orifice layout is implemented.Objective:Its influence on the nozzle mechanical-hydraulic behavior and on the spray shape transient development is experimentally investigated.Methods:In the research, a solenoid injector for light duty diesel engines is equipped with the novel nozzle prototype and tested. The prototype layout is described, pointing out the features of the nozzle orifices, in which a Slot cross-section is adopted; the investigation is accomplished extending the hydraulic tests and the spray visualizations to a reference nozzle with standard holes. The influence of the hole layout on the mechanical-hydraulic behavior of the nozzle is assessed by experimental analysis based on the rate of injection measurement, in comparison with the reference nozzle. Once the hydraulic behavior of the novel nozzle has been characterized in terms of mass flow rate, the slot influence on the spray shape is assessed analyzing the macroscopic features such as the penetration distance and the spray angle, in non evaporative conditions. The study is carried out under transient injection conditions, for different injection pressures, up to 1400 bar.Results:The results on spray characteristics also provide reference information to set up spray models suited to take the Slot orifice into account.

scholarly journals Efficient Degradation of Mordant Blue 9 Using the Fenton-Activated Persulfate System

Water ◽  
2019 ◽  
Vol 11 (12) ◽  
pp. 2532 ◽  
Author(s):  
Md. Nahid Pervez ◽  
Felix Y. Telegin ◽  
Yingjie Cai ◽  
Dongsheng Xia ◽  
Tiziano Zarra ◽  
...  
Keyword(s):  
Butyl Alcohol ◽  
Textile Dye ◽  
Oh Radicals ◽  
Operational Parameters ◽  
Reaction Conditions ◽  
Tert Butyl Alcohol ◽  
Initial Ph ◽  
Fe Complex ◽  
Optimal Reaction ◽  
Activated Persulfate

In this study, a Fenton-activated persulfate (Fe2+/PS) system was introduced for the efficient degradation of Mordant Blue 9 (MB 9) as a textile dye in an aqueous solution. Results showed that the degradation of MB 9 was markedly influenced by operational parameters, such as initial pH, PS concentration, Fe2+ concentration, and initial dye concentration. Optimal reaction conditions were then determined. Inorganic anions, such as Cl− and HCO3−, enhanced the degradation efficiency of MB 9 under optimal conditions. Addition of HCO3− reduced the degradation performance of MB 9, whereas the addition of Cl− increased the degradation percentage of MB 9. In addition, quenching experiments were conducted using methanol and tert-butyl alcohol as scavengers, and methanol was identified as an effective scavenger. Thus, the degradation of MB 9 was attributed to S O 4 • − and •OH radicals. The degradation and mineralization efficiency of MB 9 was significantly reduced using the conventional Fenton process i.e., Fe2+/ hydrogen peroxide (HP) because of the formation of a Fe complex during degradation. Meanwhile, the Fe2+/persulfate (PS) system improved the degradation and mineralization performance.

scholarly journals UVA-LED Technology’s Treatment Efficiency and Cost in a Competitive Trial Applied to the Photo-Fenton Treatment of Landfill Leachate

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1026
Author(s):  
Javier Tejera ◽  
Antonio Gascó ◽  
Daphne Hermosilla ◽  
Víctor Alonso-Gomez ◽  
Carlos Negro ◽  
...  
Keyword(s):  
Landfill Leachate ◽  
Mercury Vapor ◽  
Cod Removal ◽  
Treatment Efficiency ◽  
Alternative Source ◽  
Effluent Quality ◽  
Radiation Sources ◽  
Initial Ph ◽  
Pre Treatment ◽  
Set Up

The objective of this trial was to assess the application of UVA-LED technology as an alternative source of irradiation for photo-Fenton processes, aiming to reduce treatment costs and provide a feasible treatment for landfill leachate. An optimized combination of coagulation with ferric chloride followed by photo-Fenton treatment of landfill leachate was optimized. Three different radiation sources were tested, namely, two conventional high-pressure mercury-vapor immersion lamps (100 W and 450 W) and a custom-designed 8 W 365 nm UVA-LED lamp. The proposed treatment combination resulted in very efficient degradation of landfill leachate (COD removal = 90%). The coagulation pre-treatment removed about 70% of the COD and provided the necessary amount of iron for the subsequent photo-Fenton treatment, and it further favored this process by acidifying the solution to an optimum initial pH of 2.8. The 90% removal of color improved the penetration of radiation into the medium and by extension improved treatment efficiency. The faster the Fenton reactions were, as determined by the stoichiometric optimum set-up reaction condition of [H2O2]0/COD0 = 2.125, the better were the treatment results in terms of COD removal and biodegradability enhancement because the chances to scavenge oxidant agents were limited. The 100 W lamp was the least efficient one in terms of final effluent quality and operational cost figures. UVA-LED technology, assessed as the application of an 8 W 365 nm lamp, provided competitive results in terms of COD removal, biodegradability enhancement, and operational costs (35–55%) when compared to the performance of the 450 W conventional lamp.

Enhanced photocatalytic activity of CeO2 using β-cyclodextrin on visible light assisted decoloration of methylene blue

2013 ◽  
Vol 69 (1) ◽  
pp. 113-119 ◽  
Author(s):  
Sakthivel Pitchaimuthu ◽  
Ponnusamy Velusamy
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Inclusion Complexation ◽  
Processing Parameters ◽  
Operational Parameters ◽  
Illumination Time ◽  
Operational Conditions ◽  
Electron Microscopy Analysis ◽  
Initial Ph

An attempt has been made to enhance the photocatalytic activity of CeO2 for visible light assisted decoloration of methylene blue (MB) dye in aqueous solutions by β-cyclodextrin (β-CD). The inclusion complexation patterns between host and guest (i.e., β-CD and MB) have been confirmed with UV–visible spectral data. The interaction between CeO2 and β-CD has also been characterized by field emission scanning electron microscopy analysis. The photocatalytic activity of the catalyst under visible light was investigated by measuring the photodegradation of MB in aqueous solution. The effects of key operational parameters such as initial dye concentration, initial pH, CeO2 concentration as well as illumination time on the decolorization extents were investigated. Among the processing parameters, the pH of the reaction solution played an important role in tuning the photocatalytic activity of CeO2. The maximum photodecoloration rate was achieved at basic pH (pH 11). Under the optimum operational conditions, approximately 99.6% dye removal was achieved within 120 min. The observed results indicate that the decolorization of the MB followed a pseudo-first order kinetics.

Effects of operational parameters on defluoridation efficiency using electrocoagulation process

2011 ◽  
Vol 6 (1) ◽  
Author(s):  
M. Behbahani ◽  
M.R. Alavi Moghaddam ◽  
M. Arami
Keyword(s):  
Reaction Time ◽  
Anode Material ◽  
Removal Efficiency ◽  
Fluoride Concentration ◽  
Fluoride Removal ◽  
Operational Parameters ◽  
Applied Current ◽  
Initial Ph ◽  
Electrocoagulation Process ◽  
Electrode Connection

The aim of this study is to examine the effect of operational parameters on fluoride removal using electrocoagulation method. For this purpose, various operational parameters including initial pH, initial fluoride concentration, applied current, reaction time, electrode connection mode, anode material, electrolyte salt, electrolyte concentration, number of electrodes and interelectrode distance were investigated. The highest defluoridation efficiency achieved at initial pH 6. In the case of initial fluoride concentration, maximum removal efficiency (98.5%) obtained at concentration of 25mg/l. The increase of applied current and reaction time improved defluoridation efficiency up to 99%. The difference of fluoride removal efficiencies between monopolar and bipolar series and monopolar parallel were significant, especially at reaction time of 5 min. When aluminum used as anode material, higher removal efficiency (98.5%) achieved compared to that of iron anode (67.7%). The best electrolyte salt was NaCl with the maximum defluoridation efficiency of 98.5% compared to KNO3 and Na2SO4. The increase of NaCl had no effect on defluoridation efficiency. Number of electrodes had little effect on the amounts of Al3+ ions released in the solution and as a result defluoridation efficiency. Almost the same fluoride removal efficiency obtained for different interelectrode distances.

scholarly journals Comparison of sorption efficiency of natural and MnO2 coated zeolite for copper removal from model solutions

2021 ◽  
Vol 900 (1) ◽  
pp. 012003
Author(s):  
M Balintova ◽  
Z Kovacova ◽  
S Demcak ◽  
Y Chernysh ◽  
N Junakova
Keyword(s):  
Heavy Metals ◽  
Removal Efficiency ◽  
Ph Value ◽  
Batch Experiments ◽  
Modified Zeolite ◽  
Optimum Ph ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Correlation Factors ◽  
Maximum Removal

Abstract Removal of heavy metals from the environment is important for living beings. The present work investigates the applicability of the natural and MnO2 - coated zeolite as sorbent for the removal of copper from synthetic solutions. Batch experiments were carried out to identify the influence of initial pH and concentration in the process of adsorption. A maximum removal efficiency of Cu(II) was observed in 10 mg/L for natural (95.6%) and modified (96.4%) zeolite, where the values was almost identical, but at concentration of 500 mg/L was the removal efficiency of modified zeolite three times higher. Based on the correlation factors R2, the Langmuir isotherms better describe the decontamination process than Freundlich. The optimum pH value was set at 5.0.

Influence of Operational Parameters on Photocatalytic Degradation of Linuron in Aqueous TiO2 Pillared Montmorillonite Suspension

2021 ◽  
Vol 16 (3) ◽  
pp. 673-685
Author(s):  
D. Hadj Bachir ◽  
Hocine Boutoumi ◽  
H. Khalaf ◽  
Pierre Eloy ◽  
J. Schnee ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Physicochemical Characterization ◽  
Operating Conditions ◽  
Cod Removal ◽  
Pollutant Concentration ◽  
Catalyst Loading ◽  
Operational Parameters ◽  
X Ray ◽  
Pillared Montmorillonite ◽  
Initial Ph

TiO2 pillared clay was prepared by intercalation of titan polyoxocation into interlamelar space of an Algerian montmorillonite and used for the photocatalytic degradation of the linuron herbicide as a target pollutant in aqueous solution. The TiO2 pillared montmorillonite (Mont-TiO2) was characterized by X-ray photoelectron spectroscopy (XPS), X-Ray diffraction (XRD), X-Ray fluorescence (XRF), scanning electronic microscopy (SEM), thermogravimetry and differential thermal analysis (TG-DTA), Fourier transformed infra-red (FT-IR), specific area and porosity determinations. This physicochemical characterization pointed to successful TiO2 pillaring of the clay. The prepared material has porous structure and exhibit a good thermal stability as indicated by its surface area after calcination by microwave. The effects of operating parameters such as catalyst loading, initial pH of the solution and the pollutant concentration on the photocatalytic efficiency and COD removal  were evaluated. Under initial pH of the solution around seven, pollutant concentration of 10 mg/L and 2.5 g/L of catalyst at room temperature, the degradation efficiency and COD removal of linuron was best then the other operating conditions. It was observed that operational parameters play a major role in the photocatalytic degradation process. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

scholarly journals Study on the mechanism of degradation of tetracycline hydrochloride by microwave-activated sodium persulfate

2020 ◽  
Vol 82 (9) ◽  
pp. 1961-1970
Author(s):  
Yu Gao ◽  
Shibo Cong ◽  
Yulun He ◽  
Donglei Zou ◽  
Yuzhi Liu ◽  
...  
Keyword(s):  
High Performance ◽  
Degradation Pathway ◽  
Tetracycline Hydrochloride ◽  
Radical Scavenger ◽  
Sodium Persulfate ◽  
Liquid Chromatography Mass Spectrometry ◽  
Operational Parameters ◽  
Mechanism Of Degradation ◽  
Initial Ph ◽  
Concentration Changes

Abstract Among the different antibiotics, tetracycline hydrochloride (TCH) is one of the most commonly used. In this study, the activated sodium persulfate (SPS) process induced by microwave (MW) energy was used to treat TCH. The effect of different operational parameters of MW/SPS-treated TCH, such as SPS concentration, TCH concentration, initial pH, and MW power, was investigated. The concentration changes of TCH were determined using a spectrophotometer. The results of radical scavenger experiments indicated that the sulfate radical () was stronger than the hydroxyl radical (·OH). On the basis of high performance liquid chromatography–mass spectrometry (HPLC–MS) analysis, a possible degradation pathway of TCH was proposed. This research indicates that the MW/SPS system is a promising prospect for the treatment of TCH.

scholarly journals Theoretical and Experimental Cost–Benefit Assessment of Borehole Heat Exchangers (BHEs) According to Working Fluid Flow Rate

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4925
Author(s):  
Borja Badenes ◽  
Miguel Ángel Mateo Pla ◽  
Teresa Magraner ◽  
Javier Soriano ◽  
Javier F. Urchueguía
Keyword(s):  
Exchange Rate ◽  
Heat Exchange ◽  
Heat Pump ◽  
Flow Rate ◽  
Cost Benefit ◽  
Operating Costs ◽  
Working Fluid ◽  
Geothermal Systems ◽  
Operational Parameters ◽  
Pumping Rate

In ground-source heat-pump systems, the heat exchange rate is influenced by various design and operational parameters that condition the thermal performance of the heat pump and the running costs during exploitation. One less-studied area is the relationship between the pumping costs in a given system and the heat exchange rate. This work analyzes the investment and operating costs of representative borehole heat-exchanger configurations with varying circulating flow rate by means of a combination of analytical formulas and case study simulations to allow a precise quantification of the capital and operational costs in typical scenario. As a conclusion, an optimal flow rate minimizing either of both costs can be determined. Furthermore, it is concluded that in terms of operating costs, there is an operational pumping rate above which performance of geothermal systems is energetically strongly penalized.

Sign in / Sign up

Export Citation Format

Share Document