High efficiency solution-processed thin-film Cu(In,Ga)(Se,S)2solar cells

2016 ◽  
Vol 9 (12) ◽  
pp. 3674-3681 ◽  
Author(s):  
Ting Zhang ◽  
Yixing Yang ◽  
Deang Liu ◽  
Shing Chi Tse ◽  
Weiran Cao ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
High Efficiency ◽  
World Record ◽  
Solution Processed ◽  
Cigs Solar Cells

World record efficiency for solution-processed CIGS solar cells has been demonstrated.

scholarly journals Solution-Processed CdTe Thin-Film Solar Cells Using ZnSe Nanocrystal as a Buffer Layer

2018 ◽  
Vol 8 (7) ◽  
pp. 1195 ◽  
Author(s):  
Yanru Chen ◽  
Xianglin Mei ◽  
Xiaolin Liu ◽  
Bin Wu ◽  
Junfeng Yang ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Buffer Layer ◽  
High Efficiency ◽  
Low Cost ◽  
Buffer Layers ◽  
Thin Film Solar Cells ◽  
Solution Processed ◽  
Cdte Nanocrystal ◽  
First Time

The CdTe nanocrystal (NC) is an outstanding, low-cost photovoltaic material for highly efficient solution-processed thin-film solar cells. Currently, most CdTe NC thin-film solar cells are based on CdSe, ZnO, or CdS buffer layers. In this study, a wide bandgap and Cd-free ZnSe NC is introduced for the first time as the buffer layer for all solution-processed CdTe/ZnSe NC hetero-junction thin-film solar cells with a configuration of ITO/ZnO/ZnSe/CdTe/MoOx/Au. The dependence of the thickness of the ZnSe NC film, the annealing temperature and the chemical treatment on the performance of NC solar cells are investigated and discussed in detail. We further develop a ligand-exchanging strategy that involves 1,2-ethanedithiol (EDT) during the fabrication of ZnSe NC film. An improved power conversion efficiency (PCE) of 3.58% is obtained, which is increased by 16.6% when compared to a device without the EDT treatment. We believe that using ZnSe NC as the buffer layer holds the potential for developing high-efficiency, low cost, and stable CdTe NC-based solar cells.

scholarly journals A straightforward chemical approach for excellent In2S3 electron transport layer for high-efficiency perovskite solar cells

RSC Advances ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 884-890 ◽  
Author(s):  
Fengyang Yu ◽  
Wangen Zhao ◽  
Shengzhong (Frank) Liu
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Electron Transport ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Time Saving ◽  
Solution Processed ◽  
Selective Layer

A simple, time-saving solution-processed In2S3 thin film was applied in perovskite solar cells as the electron selective layer.

High Efficiency Solution-Processed Aluminum-Alloyed Chalcopyrite Thin Film Solar Cells

2020 ◽  
Vol MA2020-02 (27) ◽  
pp. 1908-1908
Author(s):  
Wilman Septina ◽  
Thomas West ◽  
Anne Curtis Giovanelli ◽  
Nicolas Gaillard
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
High Efficiency ◽  
Thin Film Solar Cells ◽  
Solution Processed

scholarly journals Design of Grating Al2O3 Passivation Structure Optimized for High-Efficiency Cu(In,Ga)Se2 Solar Cells

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4849
Author(s):  
Chan Hyeon Park ◽  
Jun Yong Kim ◽  
Shi-Joon Sung ◽  
Dae-Hwan Kim ◽  
Yun Seon Do
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Surface Passivation ◽  
Rear Surface ◽  
Maximum Efficiency ◽  
Structural Factors ◽  
Carrier Recombination ◽  
Cigs Solar Cells ◽  
Effective Carrier ◽  
Opening Width

In this paper, we propose an optimized structure of thin Cu(In,Ga)Se2 (CIGS) solar cells with a grating aluminum oxide (Al2O3) passivation layer (GAPL) providing nano-sized contact openings in order to improve power conversion efficiency using optoelectrical simulations. Al2O3 is used as a rear surface passivation material to reduce carrier recombination and improve reflectivity at a rear surface for high efficiency in thin CIGS solar cells. To realize high efficiency for thin CIGS solar cells, the optimized structure was designed by manipulating two structural factors: the contact opening width (COW) and the pitch of the GAPL. Compared with an unpassivated thin CIGS solar cell, the efficiency was improved up to 20.38% when the pitch of the GAPL was 7.5–12.5 μm. Furthermore, the efficiency was improved as the COW of the GAPL was decreased. The maximum efficiency value occurred when the COW was 100 nm because of the effective carrier recombination inhibition and high reflectivity of the Al2O3 insulator passivation with local contacts. These results indicate that the designed structure has optimized structural points for high-efficiency thin CIGS solar cells. Therefore, the photovoltaic (PV) generator and sensor designers can achieve the higher performance of photosensitive thin CIGS solar cells by considering these results.

On the role of solution-processed bathocuproine in high-efficiency inverted perovskite solar cells

Solar Energy ◽  
2021 ◽  
Vol 218 ◽  
pp. 142-149
Author(s):  
Shou-En Chiang ◽  
Anjali Chandel ◽  
Diksha Thakur ◽  
Yan-Ta Chen ◽  
Pei-Chen Lin ◽  
...  
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Perovskite Solar Cells ◽  
Solution Processed

scholarly journals Solution-Processed Transparent Conducting Electrodes for Flexible Organic Solar Cells with 16.61% Efficiency

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Juanyong Wan ◽  
Yonggao Xia ◽  
Junfeng Fang ◽  
Zhiguo Zhang ◽  
Bingang Xu ◽  
...  
Keyword(s):  
Solar Cells ◽  
Work Function ◽  
Organic Solar Cells ◽  
High Performance ◽  
High Efficiency ◽  
Electrical Stability ◽  
Solution Processed ◽  
Good Thermal Stability ◽  
Transparent Conducting ◽  
High Flexibility

AbstractNonfullerene organic solar cells (OSCs) have achieved breakthrough with pushing the efficiency exceeding 17%. While this shed light on OSC commercialization, high-performance flexible OSCs should be pursued through solution manufacturing. Herein, we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid (CF3SO3H). Through a low-concentration and low-temperature CF3SO3H doping, the conducting polymer anodes exhibited a main sheet resistance of 35 Ω sq−1 (minimum value: 32 Ω sq−1), a raised work function (≈ 5.0 eV), a superior wettability, and a high electrical stability. The high work function minimized the energy level mismatch among the anodes, hole-transporting layers and electron-donors of the active layers, thereby leading to an enhanced carrier extraction. The solution-processed flexible OSCs yielded a record-high efficiency of 16.41% (maximum value: 16.61%). Besides, the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85 °C, demonstrating a high flexibility and a good thermal stability.

Stable, high efficiency thin film solar cells produced by electrodeposition of cadmium telluride

1991 ◽  
Vol 23 (2-4) ◽  
pp. 388-393 ◽  
Author(s):  
A.K. Turner ◽  
J.M. Woodcock ◽  
M.E. Ozsan ◽  
J.G. Summers ◽  
J. Barker ◽  
...  
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Cadmium Telluride ◽  
High Efficiency ◽  
Thin Film Solar Cells
Sign in / Sign up

Export Citation Format

Share Document