The ability of a fibrous titanium oxophosphate for nitrogen-adsorption above room temperature

2017 ◽  
Vol 53 (14) ◽  
pp. 2249-2251
Author(s):  
Jorge García-Glez ◽  
Zakariae Amghouz ◽  
Iván da Silva ◽  
Conchi O. Ania ◽  
José B. Parra ◽  
...  
Keyword(s):  
Nitrogen Fixation ◽  
Structural Change ◽  
Ambient Temperature ◽  
Room Temperature ◽  
Inorganic Material ◽  
Nitrogen Adsorption

Nitrogen-fixation by an inorganic material at above-ambient temperature provoked by a structural change.

Formation of Dislocation Channels in Neutron Irradiated Molybdenum

1972 ◽  
Vol 30 ◽  
pp. 672-673
Author(s):  
S. Mahajan
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ambient Temperature ◽  
Room Temperature ◽  
Channel Formation ◽  
Early Stages ◽  
Transmission Electron ◽  
Three Stages ◽  
Two Stages ◽  
Polycrystalline Molybdenum

The evolution of dislocation channels in irradiated metals during deformation can be envisaged to occur in three stages: (i) formation of embryonic cluster free regions, (ii) growth of these regions into microscopically observable channels and (iii) termination of their growth due to the accumulation of dislocation damage. The first two stages are particularly intriguing, and we have attempted to follow the early stages of channel formation in polycrystalline molybdenum, irradiated to 5×1019 n. cm−2 (E > 1 Mev) at the reactor ambient temperature (∼ 60°C), using transmission electron microscopy. The irradiated samples were strained, at room temperature, up to the macroscopic yield point.Figure 1 illustrates the early stages of channel formation. The observations suggest that the cluster free regions, such as A, B and C, form in isolated packets, which could subsequently link-up to evolve a channel.

Change in the Properties of a Lead-acid Battery Depending on the Cycling Speed and the Ambient Temperature

2021 ◽  
Vol 105 (1) ◽  
pp. 119-134
Author(s):  
Jana Zimáková ◽  
Petr Baca ◽  
Martin Langer ◽  
Tomáš Binar
Keyword(s):  
Ambient Temperature ◽  
High Temperatures ◽  
Room Temperature ◽  
Lead Acid Battery ◽  
Ambient Temperatures ◽  
Lead Acid Batteries ◽  
Temperature Dependences ◽  
Cycling Speed ◽  
Lead Acid

This work deals with lead-acid batteries, their properties and individual types that are available on the market. The temperature dependences of the battery parameters at different ambient temperatures and at different discharging and charging modes are measured. 6 batteries are tested at different charging currents, which provides information about their behavior both during discharge and at the time of charging. During the experiments, testing is not only performed at room temperature, but the batteries are also exposed to high temperatures up to 75 °C.

Enhancing oxygen adsorption capabilities in Li–O2battery cathodes through solid perfluorocarbons

2017 ◽  
Vol 5 (27) ◽  
pp. 14152-14164 ◽  
Author(s):  
Moran Balaish ◽  
Yair Ein-Eli
Keyword(s):  
Carbon Black ◽  
Room Temperature ◽  
Nitrogen Adsorption ◽  
Oxygen Adsorption ◽  
Electrochemical Investigation ◽  
Liquid Adsorption

Perfluorocarbons, solid at room temperature, were added at different weight ratios to carbon black-based air electrodes for Li–O2battery. PFCs-modified air-electrodes showed improved battery performance and were characterized by HRSEM images, nitrogen adsorption (BET), liquid adsorption, a comprehensive wettability study and electrochemical investigation.

scholarly journals EFFECT OF MATURITY STAGES ON QUALITY AND SHELF LIFE OF “SOLO” PAPAYA FRUITS DURING STORAGE

2019 ◽  
pp. 57-68
Keyword(s):  
Ambient Temperature ◽  
Shelf Life ◽  
Cold Storage ◽  
Room Temperature ◽  
Colour Change ◽  
Soluble Solids ◽  
Maturity Stages ◽  
Solids Content ◽  
Sensorial Evaluation ◽  
Stage 1

“Solo” papaya fruits were harvested in October, 2016 & 2017 seasons from a commercial orchard located in Ismailia Governorate, Egypt. Papaya fruits were harvested at three maturity stages: 25% yellow (stage 1), 50% yellow (stage 2) and 100% yellow (stage 3) and evaluated during storage at ambient temperature (20°C ± 2) for 4 days + at 80- 85% RH or during cold storage at 6°C + 90- 95% RH for 20 days. Papaya fruits softened very rapidly at room temperature after harvest and had 4 days shelf life. However, the fruit can be stored for 20 days at 6°C with little changes in firmness and the fruit apparently progressed in normal ripening upon removal to ambient temperature (20°C) for 3 days. All colour values (a*, L* and C*) were linearly increased during cold storage. Conversely, as a result of colour change from green to orange-red, h° values decreased. Soluble solids content was not affected during ripening at 20°C and remained steady. Fruit harvested at stage 2 and stored at 6°C for 20 days following 3 days at 20°C had superior score for sensorial evaluation.

An efficient multicomponent, one-pot synthesis of Betti bases catalyzed by cerium (IV) ammonium nitrate (CAN) at ambient temperature

2016 ◽  
Vol 5 (4) ◽  
Author(s):  
Ramadan Ahmed Mekheimer ◽  
Abdullah Mohamed Asiri ◽  
Afaf Mohamed Abdel Hameed ◽  
Reham R. Awed ◽  
Kamal Usef Sadek
Keyword(s):  
Ambient Temperature ◽  
Environmental Pollution ◽  
Ammonium Nitrate ◽  
Room Temperature ◽  
Catalytic Amount ◽  
High Yield ◽  
Reaction Conditions ◽  
One Pot ◽  
Work Up ◽  
Cerium Iv Ammonium Nitrate

AbstractStarting from readily available 2-naphthol, aldehydes, aryl and alkylamines, a variety of Betti bases were efficiently synthesized utilizing a catalytic amount of cerium (IV) ammonium nitrate (CAN) at room temperature. This protocol has advantages of high yield, mild reaction conditions, no environmental pollution, diversity of reactants and simple work up procedure.

Room Temperature, Metal-Free, Regio-Selective Arylselenation of Anilines Using Diselenides as Selenium Source

Synthesis ◽  
2022 ◽  
Author(s):  
Rekha Bai ◽  
Kamlesh Kumar Dabaria ◽  
Satpal Singh Badsara
Keyword(s):  
Ambient Temperature ◽  
Room Temperature ◽  
Bond Formation ◽  
Metal Free ◽  
Aniline Derivatives

A metal-free direct C-H selenation of aniline derivatives via an iodine catalysed C-Se bond formation using diselenides as a selenium source at ambient temperature is described. A variety of aniline derivatives underwent regio-selective C-H selenation with different diselenides to afford the corresponding aryl selenoethers in good to excellent yields.

Magnesium Aluminate Nanoparticles for Chemical Detoxification of Sarin and Soman

2020 ◽  
Vol 20 (6) ◽  
pp. 3547-3553
Author(s):  
G. K. Prasad ◽  
L. K. Pandey ◽  
J. Praveen Kumar ◽  
K. Ganesan ◽  
J. Acharya ◽  
...  
Keyword(s):  
Particle Size ◽  
Spinel Structure ◽  
Room Temperature ◽  
Chemical Warfare Agents ◽  
Nitrogen Adsorption ◽  
Chemical Warfare ◽  
Magnesium Aluminate ◽  
Nitrogen Adsorption Isotherm ◽  
Type Iv ◽  
Warfare Agents

The solutions of Mg(NO3)2, Al(NO3)3, and (NH4)2CO3 were mixed at pH 8 and then heated at 95 °C for 4 h, aged at room temperature for 16 h, and calcined at 650 °C for 4 h to obtain magnesium aluminate nanoparticles. The obtained materials exhibited spinel structure with the particle size being 6 to 26 nm. The nanoparticles demonstrated type IV nitrogen adsorption isotherm, typical of mesoporosity with a surface area of 325 m2/g. They were utilized for studies on chemical detoxification of deadly chemical warfare agents such as sarin and soman. Our results showed that the magnesium aluminate nanoparticles effectively decontaminated more than 99% of sarin and soman within 8–10 min when used at a ratio of 1:50–60% w/w.

[C7H14NO][ClO4]: order–disorder structural change induced sudden switchable dielectric behaviour at room temperature

CrystEngComm ◽  
2018 ◽  
Vol 20 (44) ◽  
pp. 7058-7061 ◽  
Author(s):  
Guang-Meng Fan ◽  
Ji-Xing Gao ◽  
Chao Shi ◽  
Hui Yu ◽  
Le Ye ◽  
...  
Keyword(s):  
Structural Change ◽  
Room Temperature ◽  
Dielectric Behaviour ◽  
Inorganic Hybrid ◽  
Dynamic Transition ◽  
Low Dielectric ◽  
Switch Type

Static-to-dynamic transition in organic–inorganic hybrid [C7H14NO][ClO4] exhibits switch-type characteristics during the dielectric transitions between high- and low-dielectric states.

An irreversible phase transition in 1-n-butylindeno[2,1-c]pyran-3,9-dione

2012 ◽  
Vol 68 (10) ◽  
pp. o413-o416 ◽  
Author(s):  
Andrei S. Batsanov ◽  
Judith A. K. Howard ◽  
Na Wu ◽  
Zhen Yang ◽  
Todd B. Marder
Keyword(s):  
Phase Transition ◽  
Ambient Temperature ◽  
Single Crystal ◽  
Title Compound ◽  
Room Temperature ◽  
Side Chain ◽  
Compound C ◽  
Planar Conformation ◽  
Triclinic Phase ◽  
Out Of Plane

At ambient temperature, the title compound, C16H14O3, is triclinic, with then-butyl side chain disordered in an out-of-plane orientation. On cooling below 240 K, it converts into a different triclinic phase with an ordered planar conformation and denser packing, which is retained on warming to room temperature. The transition (occasionally) proceeds from single crystal to single crystal.

Sign in / Sign up

Export Citation Format

Share Document