Photoenergy storage and power amplification strategy in membrane-less photoelectrochemical biofuel cells

2016 ◽  
Vol 52 (40) ◽  
pp. 6716-6719 ◽  
Author(s):  
You Yu ◽  
Miao Xu ◽  
Shaojun Dong
Keyword(s):  
Energy Storage ◽  
Power Output ◽  
High Efficiency ◽  
Biofuel Cells ◽  
Power Amplification ◽  
Higher Power ◽  
Amplification Strategy

We proposed a novel integrated PBFC by insetting a third electrode with high efficiency energy storage and release between the bioelectrode and the photoelectrode, resulting in a higher power output than that of the original PBFC.

The Isoengine: A Novel High Efficiency Engine With Optional Compressed Air Energy Storage (CAES)

2003 ◽  
Author(s):  
Claus Linnemann ◽  
Mike W. Coney ◽  
Anthony Price
Keyword(s):  
Energy Storage ◽  
Power Output ◽  
High Efficiency ◽  
Compressed Air ◽  
Specific Power ◽  
Small Scale ◽  
Compressed Air Energy Storage ◽  
Power Cycle ◽  
Specific Power Output ◽  
High Specific Power

A novel high efficiency reciprocating piston engine — the isoengine — is predicted to achieve net electrical efficiencies of up to 60% in units of 5 to 20 MWe size. The high efficiency and at the same time a high specific power output are achieved by integrating isothermal compression, recuperative preheating and isobaric combustion into a novel power cycle. The isoengine can utilize distillate oil, natural gas or suitable biofuels. While the first commercial isoengine is envisaged to have a power output of 7 MW, a 3 MW prototype engine is currently being tested. Since compression and combustion are performed in different cylinders, these processes can also be performed at different times such that the isoengine can be used to create a highly efficient small-scale compressed air energy storage (CAES) system. In such configuration, the engine can operate at more than 140% nominal load for a limited time, which depends on the air storage capacity.

scholarly journals Jumping in lantern bugs (Hemiptera, Fulgoridae)

2021 ◽  
Author(s):  
M. Burrows ◽  
A. Ghosh ◽  
G. P. Sutton ◽  
H. M. Yeshwanth ◽  
S. M. Rogers ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Expenditure ◽  
Power Output ◽  
High Speed ◽  
Jumping Performance ◽  
Power Amplification ◽  
Amplification Mechanism

Lantern bugs are amongst the largest of the jumping hemipteran bugs with body lengths reaching 44 mm and their masses 0.7 g. They are up to 600 times heavier than smaller hemipterans that jump powerfully using catapult mechanisms to store energy. Does a similar mechanism also propel jumping in these much larger insects? The jumping performance of two species of lantern bugs (Hemiptera, Auchenorrhyncha, family Fulgoridae) from India and Malaysia was therefore analysed from high-speed videos. The kinematics showed that jumps were propelled by rapid and synchronous movements of both hind legs with their trochantera moving first. The hind legs were 20-40% longer than the front legs, which was attributable to longer tibiae. It took 5-6 ms to accelerate to take-off velocities reaching 4.65 m s−1 in the best jumps by female Kalidasa lanata. During these jumps, adults experienced an acceleration of 77 g, required an energy expenditure of 4800 µJ, a power output of 900 mW and exerted a force of 400 mN. The required power output of the thoracic jumping muscles was 21,000 W kg−1, 40 times greater than the maximum active contractile limit of muscle. Such a jumping performance therefore required a power amplification mechanism with energy storage in advance of the movement as in their smaller relatives. These large lantern bugs are near isometrically scaled up versions of their smaller relatives, still achieve comparable, if not higher, take-off velocities, and outperform other large jumping insects such as grasshoppers.

Flywheel Energy Storage System for Naval Applications

2006 ◽  
Author(s):  
Co Huynh ◽  
Patrick McMullen ◽  
Alexei Filatov ◽  
Shamim Imani ◽  
Hamid A. Toliyat ◽  
...  
Keyword(s):  
Energy Storage ◽  
Power Output ◽  
High Efficiency ◽  
Storage System ◽  
Energy Storage System ◽  
Pulse Mode ◽  
Flywheel Energy Storage ◽  
Environmental Friendliness ◽  
Flywheel Energy Storage System ◽  
Electric Equipment

A recent trend in designing naval ships is to improve performance through using more electric equipment. The reliability and quality of the onboard electric power, therefore, becomes critical as the ship functionality would entirely depend on its availability. This paper investigates the possibility of using Flywheel Energy Storage Systems (FESS), similar to those earlier developed for commercial applications, to address issues related to onboard power supplies. A design of a FESS for onboard power backup and railroad electrical stations is presented. The FESSs power output parameters are 500kWx30sec in high-duty mode and up to 2MW in pulse mode. High power output is one of the main advantages of FESS over commercially available electrochemical batteries. The other advantages include essentially an unlimited number of charge/discharge cycles, observable state of charge and environmental friendliness. Designs of the main FESS components are discussed: low-loss magnetic bearings, an energy-storage hub, a high-efficiency motor/generator and power electronics.

Pyrazolium Phase Change Materials for Solar-Thermal and Wind Energy Storage

2019 ◽  
Author(s):  
Karolina Matuszek ◽  
R. Vijayaraghavan ◽  
Craig Forsyth ◽  
Surianarayanan Mahadevan ◽  
Mega Kar ◽  
...  
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Phase Change Materials ◽  
High Efficiency ◽  
Scale Up ◽  
Solar Thermal ◽  
Energy Storage Materials ◽  
Solar Thermal Energy ◽  
Storage Materials

Renewable energy has the ultimate capacity to resolve the environmental and scarcity challenges of the world’s energy supplies. However, both the utility of these sources and the economics of their implementation are strongly limited by their intermittent nature; inexpensive means of energy storage therefore needs to be part of the design. Distributed thermal energy storage is surprisingly underdeveloped in this context, in part due to the lack of advanced storage materials. Here, we describe a novel family of thermal energy storage materials based on pyrazolium cation, that operate in the 100-220°C temperature range, offering safe, inexpensive capacity, opening new pathways for high efficiency collection and storage of both solar-thermal energy, as well as excess wind power. We probe the molecular origins of the high thermal energy storage capacity of these ionic materials and demonstrate extended cycling that provides a basis for further scale up and development.

Jumping, Climbing and Suspensory Locomotion

2018 ◽  
Keyword(s):  
Energy Storage ◽  
Elastic Energy ◽  
The Core ◽  
Power Amplification ◽  
Core Concepts

Jumping, climbing and suspensory locomotion are specialized locomotor mechanisms used on land and in the air. Jumping is used for rapid launches from substrates. Climbing and suspensory movements enable locomotion up, under and through vertically-structured habitats, such as forests. Elastic energy storage is particularly important for jumping and catapult systems and we address the core concepts of power amplification that are exemplified in nature’s extreme jumpers. We examine the diverse mechanisms of attachment that characterize animals that can grasp and adhere to a diversity of structures. We conclude the chapter by examining the integration of biological capabilities with engineering innovations in these systems.

scholarly journals Eco-Emission Analysis of Multi-Carrier Microgrid Integrated with Compressed Air and Power-to-Gas Energy Storage Technologies

2021 ◽  
Vol 13 (9) ◽  
pp. 4681
Author(s):  
Khashayar Hamedi ◽  
Shahrbanoo Sadeghi ◽  
Saeed Esfandi ◽  
Mahdi Azimian ◽  
Hessam Golmohamadi
Keyword(s):  
Energy Storage ◽  
Power Systems ◽  
High Efficiency ◽  
Objective Assessment ◽  
Energy Systems ◽  
Vital Role ◽  
Compressed Air ◽  
Emission Analysis ◽  
Multi Objective ◽  
Power To Gas

Growing concerns about global greenhouse gas emissions have led power systems to utilize clean and highly efficient resources. In the meantime, renewable energy plays a vital role in energy prospects worldwide. However, the random nature of these resources has increased the demand for energy storage systems. On the other hand, due to the higher efficiency of multi-energy systems compared to single-energy systems, the development of such systems, which are based on different types of energy carriers, will be more attractive for the utilities. Thus, this paper represents a multi-objective assessment for the operation of a multi-carrier microgrid (MCMG) in the presence of high-efficiency technologies comprising compressed air energy storage (CAES) and power-to-gas (P2G) systems. The objective of the model is to minimize the operation cost and environmental pollution. CAES has a simple-cycle mode operation besides the charging and discharging modes to provide more flexibility in the system. Furthermore, the demand response program is employed in the model to mitigate the peaks. The proposed system participates in both electricity and gas markets to supply the energy requirements. The weighted sum approach and fuzzy-based decision-making are employed to compromise the optimum solutions for conflicting objective functions. The multi-objective model is examined on a sample system, and the results for different cases are discussed. The results show that coupling CAES and P2G systems mitigate the wind power curtailment and minimize the cost and pollution up to 14.2% and 9.6%, respectively.

scholarly journals Cu2Se-based thermoelectric cellular architectures for efficient and durable power generation

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Seungjun Choo ◽  
Faizan Ejaz ◽  
Hyejin Ju ◽  
Fredrick Kim ◽  
Jungsoo Lee ◽  
...  
Keyword(s):  
Power Generation ◽  
3D Printing ◽  
Power Output ◽  
Waste Heat ◽  
Computational Simulation ◽  
Mechanical Stiffness ◽  
Higher Power ◽  
Printing Inks ◽  
Binder Free ◽  
Sustainable Power

AbstractThermoelectric power generation offers a promising way to recover waste heat. The geometrical design of thermoelectric legs in modules is important to ensure sustainable power generation but cannot be easily achieved by traditional fabrication processes. Herein, we propose the design of cellular thermoelectric architectures for efficient and durable power generation, realized by the extrusion-based 3D printing process of Cu2Se thermoelectric materials. We design the optimum aspect ratio of a cuboid thermoelectric leg to maximize the power output and extend this design to the mechanically stiff cellular architectures of hollow hexagonal column- and honeycomb-based thermoelectric legs. Moreover, we develop organic binder-free Cu2Se-based 3D-printing inks with desirable viscoelasticity, tailored with an additive of inorganic Se82− polyanion, fabricating the designed topologies. The computational simulation and experimental measurement demonstrate the superior power output and mechanical stiffness of the proposed cellular thermoelectric architectures to other designs, unveiling the importance of topological designs of thermoelectric legs toward higher power and longer durability.

Coupling anodic/cathodic energy storage through in-situ heterostructure regulation of ordered microporous carbon for sodium-ion hybrid capacitors

2021 ◽  
Author(s):  
Juan Li ◽  
Bo Wang ◽  
Tianzhao Hu ◽  
Yuzuo Wang ◽  
Zhenhua Sun ◽  
...  
Keyword(s):  
Energy Storage ◽  
Power Output ◽  
Microporous Carbon ◽  
Sodium Ion ◽  
Faradaic Reaction ◽  
Hybrid Capacitors

Sodium-ion hybrid capacitors are emerging as the promising energy storage and power output devices. However, they suffer from sluggish faradaic reaction of anode and low capacity of cathode. Zeolite-templated carbons...

High-temperature BaTiO3-based ternary dielectric multilayers for energy storage applications with high efficiency

2021 ◽  
Vol 414 ◽  
pp. 128760
Author(s):  
Wen-Bo Li ◽  
Di Zhou ◽  
Wen-Feng Liu ◽  
Jin-Zhan Su ◽  
Fayaz Hussain ◽  
...  
Keyword(s):  
High Temperature ◽  
Energy Storage ◽  
High Efficiency ◽  
Energy Storage Applications
Sign in / Sign up

Export Citation Format

Share Document