Modulation of the mechanical properties of bacterial biofilms in response to environmental challenges

2017 ◽  
Vol 5 (5) ◽  
pp. 887-900 ◽  
Author(s):  
Marwa Tallawi ◽  
Madeleine Opitz ◽  
Oliver Lieleg
Keyword(s):  
Mechanical Properties ◽  
Matrix Composition ◽  
Bacterial Biofilms ◽  
Environmental Challenges ◽  
Environmental Stimuli ◽  
The Relationship ◽  
Biofilm Matrix

In this review, we highlight recent research on the relationship between biofilm matrix composition, biofilm mechanics and environmental stimuli.

Sunlight exposure: the effects on the performance of paragliding fabric

2018 ◽  
Vol 69 (05) ◽  
pp. 381-389
Author(s):  
MENGÜÇ GAMZE SÜPÜREN ◽  
TEMEL EMRAH ◽  
BOZDOĞAN FARUK
Keyword(s):  
Mechanical Properties ◽  
Aging Process ◽  
Air Permeability ◽  
Sunlight Exposure ◽  
Test Results ◽  
Coating Materials ◽  
Strength Tests ◽  
Before And After ◽  
The Relationship ◽  
Dark Blue

This study was designed to explore the relationship between sunlight exposure and the mechanical properties of paragliding fabrics which have different colors, densities, yarn counts, and coating materials. This study exposed 5 different colors of paragliding fabrics (red, turquoise, dark blue, orange, and white) to intense sunlight for 150 hours during the summer from 9:00 a.m. to 3:00 p.m. for 5 days a week for 5 weeks. Before and after the UV radiation aging process, the air permeability, tensile strength, tear strength, and bursting strength tests were performed. Test results were also evaluated using statistical methods. According to the results, the fading of the turquoise fabric was found to be the highest among the studied fabrics. It was determined that there is a significant decrease in the mechanical properties of the fabrics after sunlight exposure. After aging, the fabrics become considerably weaker in the case of mechanical properties due to the degradation in both the dyestuff and macromolecular structure of the fiber

scholarly journals Water lubrication of graphene oxide-based materials

Friction ◽  
2021 ◽  
Author(s):  
Shaoqing Xue ◽  
Hanglin Li ◽  
Yumei Guo ◽  
Baohua Zhang ◽  
Jiusheng Li ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Graphene Oxide ◽  
Lubrication Theory ◽  
Lubricant Additives ◽  
Water Lubrication ◽  
Broad Application ◽  
Water Dispersibility ◽  
Metal Processing ◽  
The Relationship ◽  
Ph Concentration

AbstractWater is as an economic, eco-friendly, and efficient lubricant that has gained widespread attention for manufacturing. Using graphene oxide (GO)-based materials can improve the lubricant efficacy of water lubrication due to their outstanding mechanical properties, water dispersibility, and broad application scenarios. In this review, we offer a brief introduction about the background of water lubrication and GO. Subsequently, the synthesis, structure, and lubrication theory of GO are analyzed. Particular attention is focused on the relationship between pH, concentration, and lubrication efficacy when discussing the tribology behaviors of pristine GO. By compounding or reacting GO with various modifiers, amounts of GO-composites are synthesized and applied as lubricant additives or into frictional pairs for different usage scenarios. These various strategies of GO-composite generate interesting effects on the tribology behaviors. Several application cases of GO-based materials are described in water lubrication, including metal processing and bio-lubrication. The advantages and drawbacks of GO-composites are then discussed. The development of GO-based materials for water lubrication is described including some challenges.

Structure and properties of a phenylethynyl-terminated PMDA-type asymmetric polyimide

2018 ◽  
Vol 31 (3) ◽  
pp. 261-272 ◽  
Author(s):  
Yixiang Zhang ◽  
Masahiko Miyauchi ◽  
Steven Nutt
Keyword(s):  
Mechanical Properties ◽  
Thermal Processing ◽  
Amorphous Structure ◽  
Decomposition Temperature ◽  
Thermal And Mechanical Properties ◽  
Chain Mobility ◽  
Amorphous Structures ◽  
The Cross ◽  
Imide Oligomers ◽  
The Relationship

A new polymerized monomeric reactant (PMR)-type polyimide, designated TriA X, was investigated to determine polymer structure, processability, thermal, and mechanical properties and establish the relationship between the molecular structure and those properties. TriA X is a PMR-type polyimide with an asymmetric, irregular, and nonplanar backbone. Both the imide oligomers and the cross-linked polyimides of TriA X exhibited loose-packed amorphous structures, independent of thermal processing. The peculiar structures were attributed to the asymmetric backbone, which effectively prevented the formation of closed-packed chain stacking typically observed in polyimides. The imide oligomers exhibited a lower melt viscosity than a control imide oligomer (symmetric and semi-crystalline), indicating a higher chain mobility above the glass transition temperature ( Tg). The cured polyimide exhibited a Tg = 362°C and a decomposition temperature = 550°C. The cross-linked TriA X exhibited exceptional toughness and ductility (e.g. 15.1% at 23°C) for a polyimide, which was attributed to the high-molecular-weight oligomer and loose-packed amorphous structure. The thermal and mechanical properties of TriA X surpass those of PMR-15 and AFR-PE-4.

scholarly journals Experimental-numerical studies of the effect of cell structure on the mechanical properties of polypropylene foams

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 713-723
Author(s):  
Wei Gong ◽  
Tuan-Hui Jiang ◽  
Xiang-Bu Zeng ◽  
Li He ◽  
Chun Zhang
Keyword(s):  
Mechanical Properties ◽  
Size Distribution ◽  
Cell Size ◽  
Cell Structure ◽  
Structure Parameters ◽  
Cell Size Distribution ◽  
Numerical Studies ◽  
Polypropylene Foam ◽  
The Impact ◽  
The Relationship

AbstractThe effects of the cell size and distribution on the mechanical properties of polypropylene foam were simulated and analyzed by finite element modeling with ANSYS and supporting experiments. The results show that the reduced cell size and narrow size distribution have beneficial influences on both the tensile and impact strengths. Decreasing the cell size or narrowing the cell size distribution was more effective for increasing the impact strength than the tensile strength in the same case. The relationship between the mechanical properties and cell structure parameters has a good correlation with the theoretical model.

Size Effect on Mechanical Properties of LVL

2014 ◽  
Vol 887-888 ◽  
pp. 824-829
Author(s):  
Qing Fang Lv ◽  
Ji Hong Qin ◽  
Ran Zhu
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Size Effect ◽  
Tensile Test ◽  
Compression Test ◽  
Test Results ◽  
Laminated Veneer Lumber ◽  
Object Of Study ◽  
The Relationship

Laminated veneer lumber is taken as an object of study, and use LVL specimens of different sizes for compression test and tensile test. The goal of the experiment is to investigate the size effect on compressive strength and tensile strength as well as the influence of the secondary glued laminated face, which appears in the secondary molding processes. The results show that both compressive strength and tensile strength have the size effect apparently and the existence of the secondary glued laminated face lower the compressive strength of LVL specimens. Afterwards, the relationship between compressive strength and volume along with tensile strength and area are obtained by the test results.

Evaluating Mechanical Properties of Ceramics by Relative Methods

2007 ◽  
Vol 336-338 ◽  
pp. 2406-2410
Author(s):  
Yi Wang Bao ◽  
Xiao Xue Bu ◽  
Yan Chun Zhou ◽  
Li Zhong Liu
Keyword(s):  
Mechanical Properties ◽  
Material Properties ◽  
Ceramic Coatings ◽  
Relative Method ◽  
Tempered Glass ◽  
Theoretic Analysis ◽  
Surface Strength ◽  
Indirect Approach ◽  
Before And After ◽  
The Relationship

A relative method, defined as indirect approach to evaluate the material properties via the relationship between unknown properties and a known property, is proposed to estimate some properties that could not be measured by the traditional methods for ceramics. Experiments and theoretic analysis based on the relative method were carried out in this study to estimate the properties in following aspects: determining the temperature dependence of elastic modulus of some machineable ceramics by comparing the deflections; obtaining the modulus and strength of ceramic coatings supported by substrates, from the variation in properties of the rectangular beam samples before and after coating; estimating the residual stresses in tempered glass by comparing the change in the surface strength after strengthening.

Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at the Nano-Scale by Nanoindenter

2011 ◽  
Vol 117-119 ◽  
pp. 394-397
Author(s):  
Jen Ching Huang ◽  
Yung Jin Weng
Keyword(s):  
Mechanical Properties ◽  
Pure Copper ◽  
Copper Film ◽  
Value Change ◽  
Load Increment ◽  
Nano Scale ◽  
Indentation Tests ◽  
The Relationship ◽  
Increasing Load ◽  
Copper Bulk

This study used the nanoindenter to perform indentation tests on copper bulk and nano copper film in order to discuss the mechanical properties of pure copper at the nano scale. This study tested 7 levels of load, ranging from 20 to 200 μN (load increment at 30 μN) for the indentation tests on copper bulk and nano copper film specimens. Results showed that the load was roughly proportional to the residual depth, in the case of flat nano copper film, while the relationship between the load and the residual depth was not significant in the case of unsmooth copper bulk. Moreover, the hardness of both the copper bulk and the nano copper film would increase along with increasing load, while the Er value change trends of both the copper bulk and the nano copper film specimens differed with increasing load.

scholarly journals Recycled Mortars with Ceramic Aggregates. Pore Network Transmutation and Its Relationship with Physical and Mechanical Properties

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1543
Author(s):  
Francisca Guadalupe Cabrera-Covarrubias ◽  
José Manuel Gómez-Soberón ◽  
Carlos Antonio Rosas-Casarez ◽  
Jorge Luis Almaral-Sánchez ◽  
Jesús Manuel Bernal-Camacho
Keyword(s):  
Mechanical Properties ◽  
Image Analysis ◽  
Open Porosity ◽  
Gas Adsorption ◽  
Physical And Mechanical Properties ◽  
Recycled Aggregate ◽  
Bet Surface Area ◽  
Sem Image ◽  
The Relationship ◽  
Sem Image Analysis

The porosity of mortars with recycled ceramic aggregates (10, 20, 30, 50, and 100% as a replacement of natural aggregate) was evaluated and analyzed using three different techniques. The results of gas adsorption (N2), Scanning Electron Microscopy (SEM) image analysis and open porosity allowed establishing the relationship between the recycled aggregate content and the porosity of these mortars, as well as the relationship between porosity and the physical and mechanical properties of the mortars: absorption, density, compressive strength, modulus of elasticity, and drying shrinkage. Using the R2 coefficient and the equation typology as criteria, additional data such as Brunauer, Emmett, and Teller (BET) surface area (N2 adsorption) established significant correlations with the mentioned properties; with SEM image analysis, no explanatory relationships could be established; and with open porosity, revealing relationships were established (R2 > 0.9). With the three techniques, it was confirmed that the increase in porosity is related to the increase in the amount of ceramic aggregate; in particular with gas adsorption (N2) and open porosity. It was concluded that the open porosity technique can explain the behavior of these recycled mortars with more reliable data, in a simple and direct way, linked to its establishment with a more representative sample of the mortar matrix.

Prediction model for the mechanical properties of compacted poplar powder generated via hot-pressing

BioResources ◽  
2021 ◽  
Vol 16 (3) ◽  
pp. 4947-4962
Author(s):  
Jin Yan ◽  
Jianan Liu ◽  
Liqiang Zhang ◽  
Zhili Tan ◽  
Haoran Zhang ◽  
...  
Keyword(s):  
Neural Network ◽  
Mechanical Properties ◽  
Network Model ◽  
Process Parameters ◽  
Neural Network Model ◽  
Hot Pressing ◽  
Process Conditions ◽  
Wood Powder ◽  
Single Factor ◽  
The Relationship

The influence of the process parameters on the mechanical properties of compact wood powder generated via hot-pressing was analyzed through a single-factor experiment. The mechanical properties exhibited a nonlinear trend relative to the process conditions of hot-pressed compact wood powder. The relationship models between the process parameters and the mechanical properties for the compact wood powder were established by applying a multiple regression analysis and neural network methods combined with data from an orthogonal array design. A comparison between experimental and predicted results was made to investigate the accuracy of the established models by applying several data groups among the single-factor experiments. The results showed that the accuracy of the neural network model in terms of predicting the mechanical properties was greater compared with the multiple regression model. This demonstrates that the established neural network model had a better prediction performance, and it can accurately map the relationship between the process conditions and the mechanical properties of the compact wood powder.

Modification in Texture of Magnesium by the Addition of Rare Earth Elements and its Influence on Mechanical Properties

2012 ◽  
Vol 736 ◽  
pp. 307-315 ◽  
Author(s):  
Murugavel Suresh ◽  
Satyam Suwas
Keyword(s):  
Mechanical Properties ◽  
Rare Earth ◽  
Magnesium Alloys ◽  
Aluminium Alloys ◽  
Room Temperature ◽  
Main Obstacle ◽  
Rare Earth Addition ◽  
Structural Applications ◽  
Re Elements ◽  
The Relationship

Mg alloys show limited room temperature formability compared to its lightweight counterpart aluminium alloys, which is a main obstacle in using this metal for most of the structural applications. However, it is known that grain refinement and texture control are the two possibilities for the improvement of formability of magnesium alloys. Amongst the approaches attempted for the texture weakening, additions through of rare-earth (RE) elements have been found most effective. The relationship between the texture and ductility is well established. In this paper, the effect of rare earth addition on texture weakening has been summarized for various magnesium alloys under the two most common modes of deformation methods.

Sign in / Sign up

Export Citation Format

Share Document