Improved mechanical and barrier properties of low-density polyethylene nanocomposite films by incorporating hydrophobic graphene oxide nanosheets

RSC Advances ◽  
2015 ◽  
Vol 5 (98) ◽  
pp. 80739-80748 ◽  
Author(s):  
Hua-Dong Huang ◽  
Sheng-Yang Zhou ◽  
Peng-Gang Ren ◽  
Xu Ji ◽  
Zhong-Ming Li
Keyword(s):  
Graphene Oxide ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Low Density Polyethylene ◽  
Packaging Materials ◽  
Low Density ◽  
Graphene Oxide Nanosheets

The successful conversion from hydrophilic GONSs to hydrophobic ODA–GONSs imparts LDPE nanocomposite films with enhanced mechanical and barrier performances for potential packaging materials.

scholarly journals Physical and Antimicrobial Characterization of Self Assembled Silver Nanoparticle/Chitosan onto Low Density Polyethylene Film as Active Packaging Polymer

2014 ◽  
Vol 27 ◽  
pp. 53-64 ◽  
Author(s):  
Maryam Jokar ◽  
Russly Abdul Rahman ◽  
Luqman Chuah Abdullah
Keyword(s):  
Silver Nanoparticles ◽  
Growth Parameters ◽  
Chemical Reduction ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Ldpe Film ◽  
Silver Nanocomposites ◽  
Silver Nanocomposite

Colloidal Silver nanoparticles with a size of 5 nm produced by chemical reduction using poly ethylene glycol (PEG 200). Layers of silver nanoparticles and chitosan were deposited onto low density polyethylene (LDPE) substrate by layer by layer (LBL) self-assembly technique. Silver nanocomposite films were built by sequential dipping of LDPE film in either anionic silver nanoparticles or cationic chitosan. Silver nanoparticles and chitosan led to the formation of nanocomposite films possessing antimicrobial properties with the thickness of 2, 4, 8, 12 and 20 layers. Silver nanocomposite films were characterized by atomic force microscopy (AFM). Thermal, mechanical and barrier properties of LBL deposited nanocomposite films were investigated. Results showed that the LBL deposition of silver nanoparticles and chitosan increased the crystallinity of the composites and also improved mechanical and barrier properties of LDPE film significantly (p<0.05). Antimicrobial activity of silver nanocomposites againstEscherichia coliandStaphylococcus aureuswas evaluated. Growth kinetic parameters ofE.coliandS.aureusaffected by silver nanocomposites were calculated by modeling of absorbance data according to Gomperz equation. LDPE-silver nanocomposite affected bacterial growth parameters significantly (p<0.05). The specific growth rate reduced from 0.30 to 0.11 h-1forE. coliand decreased 0.27 to 0.06 h-1forS. aureus.

scholarly journals Low-Density Polyethylene Films Carrying ferula asafoetida Extract for Active Food Packaging: Thermal, Mechanical, Optical, Barrier, and Antifungal Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Razieh Niazmand ◽  
Bibi Marzieh Razavizadeh ◽  
Farzaneh Sabbagh
Keyword(s):  
Polymer Matrix ◽  
Food Packaging ◽  
Barrier Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Optical Barrier ◽  
Leaf Extracts ◽  
Polyethylene Films ◽  
Active Food Packaging ◽  
Ferula Asafoetida

The physical, thermal, mechanical, optical, microstructural, and barrier properties of low-density polyethylene films (LDPE) containing ferula asafoetida leaf and gum extracts were investigated. Results showed a reduction in elasticity and tensile strength with increasing extract concentration in the polymer matrix. The melting temperature and enthalpy increased with increasing concentration of extracts. The films containing extracts had lower L∗ and a∗ and higher b∗ indices. The films containing leaf extract had more barrier potential to UV than the gum extracts. The oxygen permeability in films containing 5% of leaf and gum extracts increased by 2.3 and 2.1 times, respectively. The morphology of the active films was similar to bubble swollen islands, which was more pronounced at higher concentrations of gum and leaf extracts. FTIR results confirmed some chemical interactions of ferula extracts with the polymer matrix. At the end of day 14th, the growth rate of Aspergillus niger and Saccharomyces cerevisea in the presence of the PE-Gum-5 reduced more than PE-Leaf-5 (3.7 and 2.4 logarithmic cycles, respectively) compared to the first day. Our findings showed that active LDPE films have desire thermo-mechanical and barrier properties for food packaging.

scholarly journals A study of the barrier properties of polyethylene coated with a nanocellulose/magnetite composite film

2016 ◽  
Vol 81 (5) ◽  
pp. 589-605 ◽  
Author(s):  
Nenad Djordjevic ◽  
Aleksandar Marinkovic ◽  
Jasmina Nikolic ◽  
Sasa Drmanic ◽  
Milica Rancic ◽  
...  
Keyword(s):  
Surface Modification ◽  
Maleic Anhydride ◽  
Hybrid Materials ◽  
Significant Contribution ◽  
Barrier Properties ◽  
Chemical Activity ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Oxygen Barrier ◽  
Magnetite Layer

The morphological, thermal and barrier properties of low-density polyethylene/polycaprolactone-modified nanocellulose hybrid materials were investigated in this paper. Nanonocelulose/magnetite (NC-Fe3O4) nanocomposite and maleic acid functionalized NC/magnetite (NCMA-Fe3O4) nanocomposite were prepared and used as filler at various concentrations (5, 10 and 15 wt. %) in polycaprolactone (PCL) layer. PE was coated with PCL/NC/magnetite layer. The addition of the filler did not unfavorably affect the inherent properties of the polymer, especially its barrier properties. Oxygen permeation measurements show that the oxygen barrier properties of magnetite enriched PCL film were improved due to chemical activity of added material. The highest level of barrier capacity was observed for PE samples coated with PCL based composite with NCMA-Fe3O4 micro/-nanofiller, which implies the significant contribution of nanocellulose surface modification with maleic anhydride residue to improved barrier properties.

Investigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging Materials

2020 ◽  
Vol 299 ◽  
pp. 94-99
Author(s):  
Vasily Ovchinnikov ◽  
Elena E. Mastalygina ◽  
Petr Pantyukhov
Keyword(s):  
Tensile Strength ◽  
Composite Material ◽  
High Density Polyethylene ◽  
Elasticity Modulus ◽  
Low Density Polyethylene ◽  
Packaging Materials ◽  
Low Density ◽  
Destruction Process ◽  
Hard Particles ◽  
Blended Polymer

Polymer composite based on multilayer combined packaging wastes was prepared and investigated. The composite was made of tetrahedral package wastes, where cardboard part was removed. It was found that obtained composite material has blended polymer matrix that consists of low-density polyethylene, high-density polyethylene and polypropylene. Melting temperature of individual polymers in composite shifts to lower temperatures than that of the initial components. It is the evidence of destruction process or interaction between polymers. The hard particles of aluminum and cellulose are uniformly distributed in the composite. For that reason, these particles do not reduce melt fluidity significantly. The tensile strength and elasticity modulus are higher for the obtained material compared to pure polyethylene. The results show a high potential for the use of the developed composite material.

Nanocomposite Films of Poly(vinyl alcohol)-Grafted Graphene Oxide/Poly(vinyl alcohol) for Gas Barrier Film Applications

2015 ◽  
Vol 15 (10) ◽  
pp. 8348-8352 ◽  
Author(s):  
Min Eui Lee ◽  
Hyoung-Joon Jin
Keyword(s):  
Graphene Oxide ◽  
Vinyl Alcohol ◽  
Transmission Rate ◽  
Barrier Properties ◽  
Nanocomposite Films ◽  
Strong Interactions ◽  
Poly Vinyl Alcohol ◽  
Gas Barrier ◽  
Oxygen Transmission Rate ◽  
Gas Barrier Properties

Poly(vinyl alcohol) (PVA) composites containing graphene oxide (GO) functionalized with PVA were synthesized via the esterification of the carboxylic groups of GO. The presence of PVA-grafted GO (PVA-g-GO) in the PVA matrix induced strong interactions between the chains of the PVA matrix and allowed the PVA-g-GO to be uniformly dispersed throughout the matrix. The grafting of PVA to GO increased the gas barrier properties of the GO/PVA composites because of the increased compatibility between GO and PVA. The PVA-g-GO/PVA composites were used to coat the surface of poly(ethylene terephthalate) films. These coated films exhibited excellent gas barrier properties; the film containing 0.3 wt% of PVA-g-GO had an oxygen transmission rate (OTR) of 0.025 cc/(m2 · day) and an optical transmittance of 83.8%. As a result, PVA-g-GO/PVA composites that exhibited enhanced gas barrier properties were prepared with a solution mixing method.

Sign in / Sign up

Export Citation Format

Share Document