scholarly journals Low-Density Polyethylene Films Carrying ferula asafoetida Extract for Active Food Packaging: Thermal, Mechanical, Optical, Barrier, and Antifungal Properties

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Razieh Niazmand ◽  
Bibi Marzieh Razavizadeh ◽  
Farzaneh Sabbagh
Keyword(s):  
Polymer Matrix ◽  
Food Packaging ◽  
Barrier Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Optical Barrier ◽  
Leaf Extracts ◽  
Polyethylene Films ◽  
Active Food Packaging ◽  
Ferula Asafoetida

The physical, thermal, mechanical, optical, microstructural, and barrier properties of low-density polyethylene films (LDPE) containing ferula asafoetida leaf and gum extracts were investigated. Results showed a reduction in elasticity and tensile strength with increasing extract concentration in the polymer matrix. The melting temperature and enthalpy increased with increasing concentration of extracts. The films containing extracts had lower L∗ and a∗ and higher b∗ indices. The films containing leaf extract had more barrier potential to UV than the gum extracts. The oxygen permeability in films containing 5% of leaf and gum extracts increased by 2.3 and 2.1 times, respectively. The morphology of the active films was similar to bubble swollen islands, which was more pronounced at higher concentrations of gum and leaf extracts. FTIR results confirmed some chemical interactions of ferula extracts with the polymer matrix. At the end of day 14th, the growth rate of Aspergillus niger and Saccharomyces cerevisea in the presence of the PE-Gum-5 reduced more than PE-Leaf-5 (3.7 and 2.4 logarithmic cycles, respectively) compared to the first day. Our findings showed that active LDPE films have desire thermo-mechanical and barrier properties for food packaging.

Physicomechanical, optical, barrier, and WAXS studies of filled linear low-density polyethylene films

2003 ◽  
Vol 90 (11) ◽  
pp. 2938-2944 ◽  
Author(s):  
Siddaramaiah ◽  
T. Jeevananda ◽  
K. S. Jagadeesh ◽  
H. Somashekarappa ◽  
R. Somashekar
Keyword(s):  
Low Density Polyethylene ◽  
Low Density ◽  
Linear Low Density Polyethylene ◽  
Optical Barrier ◽  
Polyethylene Films

Low-density polyethylene/curcumin melt extruded composites with enhanced water vapor barrier and antioxidant properties for active food packaging

Polymer ◽  
2019 ◽  
Vol 175 ◽  
pp. 137-145 ◽  
Author(s):  
Jasim Zia ◽  
Uttam C. Paul ◽  
José Alejandro Heredia-Guerrero ◽  
Athanassia Athanassiou ◽  
Despina Fragouli
Keyword(s):  
Water Vapor ◽  
Food Packaging ◽  
Antioxidant Properties ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Water Vapor Barrier ◽  
Active Food Packaging

scholarly journals Low-density polyethylene films incorporated with silver nanoparticles to promote antimicrobial efficiency in food packaging

2019 ◽  
Vol 26 (4) ◽  
pp. 353-366
Author(s):  
Sabrina da Costa Brito ◽  
Joana D Bresolin ◽  
Kátia Sivieri ◽  
Marcos D Ferreira
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Silver Nanoparticles ◽  
Food Packaging ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Bacterial Cells ◽  
Scanning Calorimetry ◽  
Polyethylene Films ◽  
Scanning Electron

Technological innovations in packaging are intended to prevent microbiological contaminations for ensuring food safety and preservation. In this context, researchers have investigated the antimicrobial effect of low-density polyethylene films incorporated with the following concentrations of silver nanoparticles: 1.50, 3.75, 7.50, 15.00, 30.00, 60.00, and 75.00 µg/ml. The films were characterized using field emission gun scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetry, and differential scanning calorimetry. From the results of these techniques, it could be concluded that the silver nanoparticles incorporated in the low-density polyethylene films did not influence their physical, chemical, and thermal properties. The direct contact assays, shake-flask assays, and bacterial images obtained using scanning electron microscopy were used to analyze the antimicrobial activity of the films. In the microbial analyses, it was verified that the nanostructured films exhibited antimicrobial properties against all the microorganisms studied, although more notably for fungi and Gram-negative bacteria than the Gram-positive bacteria. Moreover, it was discovered that the packages, in which silver nanoparticles were incorporated, inhibited the growth and reproduction of bacterial cells during the early stages. These results suggest that the extruded low-density polyethylene films incorporated with silver nanoparticles may be an essential tool for improving food quality and safety.

Long- and short-term antibacterial properties of low-density polyethylene-based films coated with zinc oxide nanoparticles for potential use in food packaging

2019 ◽  
Vol 35 (2) ◽  
pp. 117-134 ◽  
Author(s):  
Hajer Rokbani ◽  
France Daigle ◽  
Abdellah Ajji
Keyword(s):  
Zinc Oxide ◽  
Antibacterial Activity ◽  
Zinc Oxide Nanoparticles ◽  
Food Packaging ◽  
Antibacterial Properties ◽  
Polyethylene Film ◽  
Low Density Polyethylene ◽  
Oxide Nanoparticles ◽  
Low Density ◽  
Polyethylene Films

Concerns in food safety and the need for high-quality foods have increased the demand for extending the shelf life of packaged foods. Subsequently, promoting and investigating the development of antibacterial materials for food packaging has become inevitable. Zinc oxide nanoparticles have attracted attention lately owing to their multifunctional properties, especially antibacterial activity. For this study, antibacterial low-density polyethylene films were prepared by coating zinc oxide nanoparticles onto their surface. The low-density polyethylene film antibacterial activity was evaluated toward Gram-positive and Gram-negative bacteria. The scanning electron microscopy images showed that using anhydride-modified low-density polyethylene (LDPE-g-AM) resin permitted improved zinc oxide nanoparticle distribution on the low-density polyethylene film surface, reduced the agglomerate sizes, and reinforced the zinc oxide nanoparticle bonding to the low-density polyethylene film surface. We found that the coated low-density polyethylene films exhibited high antibacterial activity against both strains. The antibacterial tests also proved that the coated films retained their antibacterial efficiency toward Escherichia coli, even after eight months, with a reduction rate higher than 99.9%, whereas for Staphylococcus aureus the antibacterial properties for the linear low-density polyethylene (LLDPE) films decreased at eight months and improved for the LDPE-g-AM films. When the zinc oxide coated films were laminated with neat low-density polyethylene, only the LDPE-g-AM was still active against E. coli provided that the lamination thickness does not go beyond 8 µm. This research demonstrated that the coated low-density polyethylene films have excellent attributes when used as an active coating in the food packaging industry.

scholarly journals Physicomechanical, optical, barrier, and wide angle X-ray scattering studies of filled low density polyethylene films

2006 ◽  
Vol 100 (4) ◽  
pp. 2781-2789 ◽  
Author(s):  
Siddaramaiah ◽  
K. H. Guruprasad ◽  
R. T. Nagaralli ◽  
H. Somashekarappa ◽  
T. N. Guru Row ◽  
...  
Keyword(s):  
Low Density Polyethylene ◽  
Low Density ◽  
Wide Angle ◽  
Optical Barrier ◽  
X Ray ◽  
Polyethylene Films ◽  
X Ray Scattering ◽  
Ray Scattering

scholarly journals Evaluación de la migración de bromuro de cetilpiridinio desde nanocompósitos activos hacia un simulante graso de alimentos/Cetylpyridinium bromide migration assessment from active nanocomposites to a fatty food simulant

2020 ◽  
Author(s):  
C. Muñoz-Shugulí ◽  
F.J. Rodríguez ◽  
E. Muñoz ◽  
M.J. Galotto
Keyword(s):  
Electrical Conductivity ◽  
Food Packaging ◽  
Low Density Polyethylene ◽  
Low Density ◽  
Polymeric Nanocomposites ◽  
Cetylpyridinium Bromide ◽  
Active Food Packaging ◽  
Food Simulant ◽  
Fatty Food ◽  
The Matrix

En los últimos años, el desarrollo de nanocompósitos poliméricos se plantea como una interesante alternativa para el diseño de nuevos materiales para el envasado activo de alimentos. A pesar de esto, existe constante preocupación relacionada a la migración de los componentes activos incorporados en el material ya que, un material de envasado destinado a entrar en contacto con un alimento debe presentar valores de migración bajo los límites establecidos en regulaciones internacionales. En este sentido, el objetivo del presente trabajo fue evaluar la migración del surfactante bromuro de cetilpiridinio (CPB) desde nanocompósitos activos de polietileno de baja densidad y montmorillonita modificada con CPB, hacia un simulante graso de alimentos (etanol 95 %). El seguimiento de la migración del componente se realizó a través de la medición de la conductividad eléctrica del simulante en contacto con los nanocompósitos. Se determinó que la presencia del 3,0 % de organoarcilla permite una mayor migración del CPB debido a la presencia del surfactante libre en la matriz y al hinchamiento de la organoarcilla superficial por hidratación. Además, se observó que la migración es prolongada en el tiempo y está por debajo de los límites permitidos por la legislación estadounidense, lo que permitiría la generación de materiales novedosos que podrían ser empleados en el diseño de envases activos de alimentos. In the last years, the development of polymeric nanocomposites is presented as an interesting alternative for the design of new materials for active food packaging. Despite this, there are concerns regarding the migration of the components incorporated in the material since a packaging material intended to come into contact with food must have migration values under the limits established in international regulations. In this sense, the aim in this work was to evaluate the migration of the surfactant cetylpyridinium bromide (CPB) from active nanocomposites of low density polyethylene and motmorillonite modified with CPB to a fatty food simulant (ethanol 95 %). The migration of the component was followed by fat simulant electrical conductivity measurements during the contact with the nanocomposites. It was determined that materials with 3,0 % of organoclay allowed a higher migration of CPB due to the presence of free surfactant in the matrix and swelling of the superficial organoclay. In addition, it was observed that the migration is prolonged in time and it is below the limits allowed by US legislation, which would enable the generation of novel materials that could be used in the design of active food packaging. Palabras clave: surfactante, conductividad eléctrica, polietileno de baja densidad, organoarcilla, envase activo de alimentos. Keywords: surfactant, electrical conductivity, low density polyethylene, organoclay, food active packaging.

Sign in / Sign up

Export Citation Format

Share Document