scholarly journals Melt processing and characterisation of polyamide 6/graphene nanoplatelet composites

RSC Advances ◽  
2015 ◽  
Vol 5 (65) ◽  
pp. 52395-52409 ◽  
Author(s):  
B. Mayoral ◽  
E. Harkin-Jones ◽  
P. Noorunnisa Khanam ◽  
M. A. AlMaadeed ◽  
M. Ouederni ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Polyamide 6 ◽  
Graphene Nanoplatelets ◽  
Melt Processing ◽  
Industrial Scale ◽  
Graphene Nanoplatelet

The incorporation of graphene nanoplatelets into nylon (PA6)viamelt processing on an industrial scale significantly increases the crystallinity, stiffness, and electrical conductivity of the resulting composites.

scholarly journals In situ alignment of graphene nanoplatelets in poly(vinyl alcohol) nanocomposite fibers with controlled stepwise interfacial exfoliation

2019 ◽  
Vol 1 (7) ◽  
pp. 2510-2517 ◽  
Author(s):  
Weiheng Xu ◽  
Sayli Jambhulkar ◽  
Rahul Verma ◽  
Rahul Franklin ◽  
Dharneedar Ravichandran ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electrical Conductivity ◽  
Vinyl Alcohol ◽  
Graphene Nanoplatelets ◽  
Poly Vinyl Alcohol ◽  
Graphene Nanoplatelet ◽  
Nanocomposite Fibers

Exfoliated and aligned continuous graphene nanoplatelet channels with enhanced mechanical properties and superior electrical conductivity.

scholarly journals Thermal and Quasi-Static Mechanical Characterization of Polyamide 6-Graphene Nanoplatelets Composites

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1454
Author(s):  
Pietro Russo ◽  
Francesca Cimino ◽  
Antonio Tufano ◽  
Francesco Fabbrocino
Keyword(s):  
Chemical Resistance ◽  
Experimental Tests ◽  
Polyamide 6 ◽  
Graphene Nanoplatelets ◽  
Strength Parameter ◽  
Melt Compounding ◽  
Static Mechanical ◽  
Thermal And Electrical Properties ◽  
Multifunctional Products

The growing demand for lightweight and multifunctional products in numerous industrial fields has recently fuelled a growing interest in the development of materials based on polymer matrices including graphene-like particles, intrinsically characterized by outstanding mechanical, thermal, and electrical properties. Specifically, with regard to one of the main mass sectors, which is the automotive, there has been a significant increase in the use of reinforced polyamides for underhood applications and fuel systems thanks to their thermal and chemical resistance. In this frame, polyamide 6 (PA6) composites filled with graphene nanoplatelets (GNPs) were obtained by melt-compounding and compared in terms of thermal and mechanical properties with the neat matrix processed under the same condition. The results of the experimental tests have shown that the formulations studied so far offer slight improvements in terms of thermal stability but much more appreciable benefits regarding both tensile and flexural parameters with respect to the reference material. Among these effects, the influence of the filler content on the strength parameter is noteworthy. However, the predictable worsening of the graphene sheet dispersion for GNPs contents greater than 3%, as witnessed by scanning electron images of the tensile fractured sections of specimens, affected the ultimate performance of the more concentrated formulation.

Scalable ultrarobust thermoconductive nonflammable bioinspired papers of graphene nanoplatelet crosslinked aramid nanofibers for thermal management and electromagnetic shielding

2021 ◽  
Author(s):  
Minh Canh Vu ◽  
Pyeong Jun Park ◽  
Sa-Rang Bae ◽  
Soo Young Kim ◽  
Young-Min Kang ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Thermal Management ◽  
Electromagnetic Shielding ◽  
Graphene Nanoplatelets ◽  
Emi Shielding ◽  
Graphene Nanoplatelet

Graphene nanoplatelets are chemically crosslinked to aramid nanofibers through a phosphorus trimer to fabricate ultratough, thermoconductive, flame retardant, and EMI shielding films.

scholarly journals Enhancing Graphene Retention and Electrical Conductivity of Plasma-Sprayed Alumina/Graphene Nanoplatelets Coating by Powder Heat Treatment

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 643
Author(s):  
Xiaoyu Wu ◽  
Shufeng Xie ◽  
Kangwei Xu ◽  
Lei Huang ◽  
Daling Wei ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Electrical Conductivity ◽  
Structural Integrity ◽  
Ceramic Coatings ◽  
Treatment Temperature ◽  
Graphene Nanoplatelets ◽  
Structural Defects ◽  
Temperature Plasma ◽  
Heat Treated ◽  
Plasma Sprayed

Burning loss of graphene in the high-temperature plasma-spraying process is a critical issue, significantly limiting the remarkable performance improvement in graphene reinforced ceramic coatings. Here, we reported an effective approach to enhance the graphene retention, and thus improve the performance of plasma-sprayed alumina/graphene nanoplatelets (Al2O3/GNPs) coatings by heat treatment of agglomerated Al2O3/GNPs powders. The effect of powder heat treatment on the microstructure, GNPs retention, and electrical conductivity of Al2O3/GNPs coatings were systematically investigated. The results indicated that, with the increase in the powder heat treatment temperature, the plasma-sprayed Al2O3/GNPs coatings exhibited decreased porosity and improved adhesive strength. Thermogravimetric analysis and Raman spectra results indicated that increased GNPs retention from 12.9% to 28.4%, and further to 37.4%, as well as decreased structural defects, were obtained for the AG, AG850, and AG1280 coatings, respectively, which were fabricated by using AG powders without heat treatment, powders heat-treated at 850 °C, and powders heat-treated at 1280 °C. Moreover, the electrical conductivities of AG, AG850, and AG1280 coatings exhibited 3 orders, 4 orders, and 7 orders of magnitude higher than that of Al2O3 coating, respectively. Powder heat treatment is considered to increase the melting degree of agglomerated alumina particles, eventually leaving less thermal energy for GNPs to burn; thus, a high retention amount and structural integrity of GNPs and significantly enhanced electrical conductivity were achieved for the plasma-sprayed Al2O3/GNPs coatings.

scholarly journals Investigation and Modeling of the Electrical Conductivity of Graphene Nanoplatelets-Loaded Doped-Polypyrrole

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1034
Author(s):  
Oladipo Folorunso ◽  
Yskandar Hamam ◽  
Rotimi Sadiku ◽  
Suprakas Sinha Ray ◽  
Neeraj Kumar
Keyword(s):  
Electrical Conductivity ◽  
Structural Changes ◽  
Spherical Shape ◽  
Graphene Nanoplatelets ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermogravimetric Analyzer ◽  
Energy Storage Applications ◽  
Electrical Conductivity Data

In this study, a hybrid of graphene nanoplatelets with a polypyrrole having 20 wt.% loading of carbon-black (HGPPy.CB20%), has been fabricated. The thermal stability, structural changes, morphology, and the electrical conductivity of the hybrids were investigated using thermogravimetric analyzer, differential scanning calorimeter, X-ray diffraction analyzer, scanning electron microscope, and laboratory electrical conductivity device. The morphology of the hybrid shows well dispersion of graphene nanoplatelets on the surface of the PPy.CB20% and the transformation of the gravel-like PPy.CB20% shape to compact spherical shape. Moreover, the hybrid’s electrical conductivity measurements showed percolation threshold at 0.15 wt.% of the graphene nanoplatelets content and the curve is non-linear. The electrical conductivity data were analyzed by comparing different existing models (Weber, Clingerman and Taherian). The results show that Taherian and Clingerman models, which consider the aspect ratio, roundness, wettability, filler electrical conductivity, surface interaction, and volume fractions, closely described the experimental data. From these results, it is evident that Taherian and Clingerman models can be modified for better prediction of the hybrids electrical conductivity measurements. In addition, this study shows that graphene nanoplatelets are essential and have a significant influence on the modification of PPy.CB20% for energy storage applications.

Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior

2017 ◽  
Vol 52 (11) ◽  
pp. 1495-1503 ◽  
Author(s):  
K Hamdi ◽  
Z Aboura ◽  
W Harizi ◽  
K Khellil
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fiber ◽  
Carbon Black ◽  
Electrical Current ◽  
Polyamide 6 ◽  
Fiber Reinforced Polymer ◽  
Carbon Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
Carbon Fiber Reinforced

This work tends to characterize the effect of carbon black nanofillers on the properties of the woven carbon fiber reinforced thermoplastic polymers. First of all, composites from nanofilled Polyamide 6 resin reinforced by carbon fibers were fabricated. Scanning electron microscopy observations were performed to localize the nanoparticles and showed that particles penetrated the fiber zone. In fact, by reaching this zone, the carbon black nanofillers create a connectivity's network between fibers, which produces an easy pathway for the electrical current. It explains the noticed improvement of the electrical conductivity of the carbon black nanofilled composites. Electrical conductivity of neat matrix composite passed from 20 to 80 S/cm by adding 8 wt% of carbon black and to 140 S/cm by adding 16 wt% of the same nanofiller. The addition of nanofillers modifies the heating and cooling laws of carbon fiber reinforced polymer: the nanofilled carbon fiber reinforced polymer with 16 wt% is the most conductive so it heats less. Based on these results, the use of the composite itself as an indicator of this mechanical state might be possible. In fact, the study of the influence of a mechanical loading on the electrical properties of the composite by recording the variance of an electrical set is possible.

Electrical conductivity enhancement in thermoplastic polyurethane-graphene nanoplatelet composites by stretch-release cycles

2017 ◽  
Vol 110 (12) ◽  
pp. 121904 ◽  
Author(s):  
Pietro Cataldi ◽  
Luca Ceseracciu ◽  
Sergio Marras ◽  
Athanassia Athanassiou ◽  
Ilker S. Bayer
Keyword(s):  
Electrical Conductivity ◽  
Thermoplastic Polyurethane ◽  
Graphene Nanoplatelet ◽  
Conductivity Enhancement
Sign in / Sign up

Export Citation Format

Share Document