Enhanced Raman scattering from aromatic dithiols electrosprayed into plasmonic nanojunctions

2015 ◽  
Vol 184 ◽  
pp. 339-357 ◽  
Author(s):  
Patrick Z. El-Khoury ◽  
Grant E. Johnson ◽  
Irina V. Novikova ◽  
Yu Gong ◽  
Alan G. Joly ◽  
...  

We describe surface enhanced Raman spectroscopy (SERS) experiments in which molecular coverage is systematically varied from 3.8 × 105 to 3.8 × 102 to 0.38 molecules per μm2 using electrospray deposition of ethanolic 4,4′-dimercaptostilbene (DMS) solutions. The plasmonic SERS substrate used herein consists of a well-characterized 2-dimensional (2D) array of silver nanospheres (see El-Khoury et al., J. Chem. Phys., 2014, 141, 214308), previously shown to feature uniform topography and plasmonic response, as well as intense SERS activity. When compared to their ensemble averaged analogues, the spatially and temporally averaged spectra of a single molecule exhibit several unique features including: (i) distinct relative intensities of the observable Raman-active vibrational states, (ii) more pronounced SERS backgrounds, and (iii) broader Raman lines indicative of faster vibrational dephasing. The first observation may be understood on the basis of an intuitive physical picture in which the removal of averaging over multiple molecules exposes the tensorial nature of Raman scattering. When an oriented single molecule gives rise to the recorded SERS spectra, the relative orientation of the molecule with respect to vector components of the local electric field determines the relative intensities of the observable vibrational states. Using a single molecule SERS framework, described herein, we derive a unique molecular orientation in which a single DMS molecule is isolated at a nanojunction formed between two silver nanospheres in the 2D array. The DMS molecule is found lying nearly flat with respect to the metal. The derived orientation of a single molecule at a plasmonic nanojunction is consistent with observations (ii) and (iii). In particular, a careful inspection of the temporal spectral variations along the recorded single molecule SERS time sequences reveals that the time-averaged SERS backgrounds arise from individual molecular events, marked by broadened SERS signatures. We assign the broadened spectra along the SERS time sequence – which sum up to a SERS background in the averaged spectra – to instances in which the π-framework of the DMS molecule is parallel to the metal at a classical plasmonic nanojunction. This also accounts for Raman line broadening as a result of fast vibrational dephasing, and driven by molecular reorientation at a plasmonic nanojunction. Furthermore, we report on the molecular orientation dependence of single molecule SERS enhancement factors. We find that in the case of a single DMS molecule isolated at a plasmonic nanojunction, molecular orientation may affect the derived single molecule SERS enhancement factor by up to 5 orders of magnitude. Taking both chemical effects as well as molecular orientation into account, we were able to estimate a single molecule enhancement factor of ∼1010 in our measurements.

2008 ◽  
Vol 1077 ◽  
Author(s):  
Kushagra Singhal ◽  
Karthik Bhatt ◽  
Zhouyang Kang ◽  
Wouter Hoff ◽  
Aihua Xie ◽  
...  

ABSTRACTPhotoactive yellow protein (PYP) is a small cytosolic photoreceptor that actuates the negative phototactic response in its host organism Halorhodospira halophila. It has an optical absorption maximum at 446 nm (blue light). We report an initial study of the photocycle of PYP at the single molecule level using “high enhancement factor” surface-enhanced Raman scattering (SERS)-active nanostructures with 514 nm laser excitation. The SERS-active “nanometal-on-semiconductor” structures are prepared employing a redox technique on thin germanium films, coated on glass slides. Single molecule spectra are observed in terms of sudden appearance of discernable Raman peaks with spectral fluctuations. The single molecule spectra capture protonation, photo-isomerization, and H-bond breaking - the steps that are instrumental in the photocycle of PYP. This is indicative of single PYP molecules diffusing to high-enhancement-factor SERS sites, and undergoing photo-cycle under 514 nm excitation.


2015 ◽  
Vol 17 (33) ◽  
pp. 21294-21301 ◽  
Author(s):  
Daniel C. Rodrigues ◽  
Michele L. de Souza ◽  
Klester S. Souza ◽  
Diego P. dos Santos ◽  
Gustavo F. S. Andrade ◽  
...  

The SERS enhancement factor (SERS-EF) is one of the most important parameters that characterizes the ability of a given substrate to enhance the Raman signal for SERS applications. The comparison between dynamic and static substrates, however, should not be performed in sense of SERS-EF.


2020 ◽  
Vol 8 (46) ◽  
pp. 16513-16519
Author(s):  
Eleonora Cara ◽  
Luisa Mandrile ◽  
Alessio Sacco ◽  
Andrea M. Giovannozzi ◽  
Andrea M. Rossi ◽  
...  

Determination of the SERS enhancement factor through the challenging measurement of the molecular surface density by reference-free X-ray fluorescence.


2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Nathan D. Israelsen ◽  
Cynthia Hanson ◽  
Elizabeth Vargis

Raman spectroscopy has enabled researchers to map the specific chemical makeup of surfaces, solutions, and even cells. However, the inherent insensitivity of the technique makes it difficult to use and statistically complicated. When Raman active molecules are near gold or silver nanoparticles, the Raman intensity is significantly amplified. This phenomenon is referred to as surface-enhanced Raman spectroscopy (SERS). The extent of SERS enhancement is due to a variety of factors such as nanoparticle size, shape, material, and configuration. The choice of Raman reporters and protective coatings will also influence SERS enhancement. This review provides an introduction to how these factors influence signal enhancement and how to optimize them during synthesis of SERS nanoparticles.


Coatings ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 910
Author(s):  
Fernando Soto-Nieto ◽  
Rurik Farías ◽  
Simón Yobanny Reyes-López

Surface-enhanced Raman spectroscopy (SERS) and Surface-enhanced infrared absorption spectroscopy (SEIRAS) are both novel techniques favored by the excitation of surface plasmons onto metal nanostructures. The light emitted from the metal surface couples with the vibrational transitions of molecules in proximity, enhancing its spectral response and leading to more sensitive and effective spectroscopic analysis. The absence of inexpensive and reproducible substrates is among the major impediments to the accurate implementation and optimal performance of the technique. The development of a low-cost active substrate based on silica–hydroxyapatite through sol–gel synthesis and electrospinning is addressed in the present study. Fibers of 512 ± 199 nm diameter were produced after sintering at 1150 °C on the electrospun mats. The fibers are fixed to an indium tin oxide (ITO) glass base for electrodeposition with 10 and 20 mM AgNO3 at 1.5 and 3.3 V at different time periods. Electrodeposition produced silver nanorods and nanocubes on the fibers. The SERS and SEIRAS activity of each one of the nine supports was tested using pyridine 1 nM, comparing it with the spectrum of pyridine 1 mM. An enhancement factor of 2.01 × 106 for the band at 3335 cm−1 was obtained during a SEIRAS essay for the support doped for 2 min at 3.3 V with 10 mM silver nitrate solution. The highest SERS enhancement factor was 3.46 × 108, for the band at 1567 cm−1 in the substrate doped for 5 min at 1.5 V with silver nitrate solution at 10 mM. After testing both samples with 10−4 M violet crystal solution, no SERS enhancement factor was found, but higher band resolution in the spectra was observed.


2019 ◽  
Vol 26 (38) ◽  
pp. 6878-6895 ◽  
Author(s):  
Anna Jabłońska ◽  
Aleksandra Jaworska ◽  
Mateusz Kasztelan ◽  
Sylwia Berbeć ◽  
Barbara Pałys

: Surface Enhanced Raman Spectroscopy (SERS) has a long history as an ultrasensitive platform for the detection of biological species from small aromatic molecules to complex biological systems as circulating tumor cells. Thanks to unique properties of graphene, the range of SERS applications has largely expanded. Graphene is efficient fluorescence quencher improving quality of Raman spectra. It contributes also to the SERS enhancement factor through the chemical mechanism. In turn, the chemical flexibility of Reduced Graphene Oxide (RGO) enables tunable adsorption of molecules or cells on SERS active surfaces. Graphene oxide composites with SERS active nanoparticles have been also applied for Raman imaging of cells. This review presents a survey of SERS assays employing graphene or RGO emphasizing the improvement of SERS enhancement brought by graphene or RGO. The structure and physical properties of graphene and RGO will be discussed too.


Sign in / Sign up

Export Citation Format

Share Document