Novel arylimides of phosphorus(III) and arsenic(III)[the arsazene being the first stable compound containing an asIIIN double bond]; X-ray structures of E(NAr)(NHAr)(E = P or As, Ar = C6H2But3-2,4,6)

1986 ◽  
pp. 1633-1634 ◽  
Author(s):  
Peter B. Hitchcock ◽  
Michael F. Lappert ◽  
Audesh K. Rai ◽  
Hugh D. Williams
Keyword(s):  
Double Bond ◽  
Stable Compound ◽  
X Ray

One-pot Synthesis of Pyrazolone Sulfones by Iodine-catalyzed Sulfenylation of Pyrazolones with Aryl Sulfonyl Hydrazides Followed by Oxidation in Water

2018 ◽  
Vol 15 (3) ◽  
pp. 380-387
Author(s):  
Xia Zhao ◽  
Xiaoyu Lu ◽  
Lipeng Zhang ◽  
Tianjiao Li ◽  
Kui Lu
Keyword(s):  
Double Bond ◽  
Efficient Method ◽  
Room Temperature ◽  
Sulfonyl Chloride ◽  
Antibacterial Activities ◽  
Oxidation Reactions ◽  
Reaction Conditions ◽  
One Pot ◽  
X Ray ◽  
Amide Form

Aim and Objective: Pyrazolone sulfones have been reported to exhibit herbicidal and antibacterial activities. In spite of their good bioactivities, only a few methods have been developed to prepare pyrazolone sulfones. However, the substrate scope of these methods is limited. Moreover, the direct sulfonylation of pyrazolone by aryl sulfonyl chloride failed to give pyrazolone sulfones. Thus, developing a more efficient method to synthesize pyrazolone sulfones is very important. Materials and Method: Pyrazolone, aryl sulphonyl hydrazide, iodine, p-toluenesulphonic acid and water were mixed in a sealed tube, which was heated to 100°C for 12 hours. The mixture was cooled to 0°C and m-CPBA was added in batches. The mixture was allowed to stir for 30 min at room temperature. The crude product was purified by silica gel column chromatography to afford sulfuryl pyrazolone. Results: In all cases, the sulfenylation products were formed smoothly under the optimized reaction conditions, and were then oxidized to the corresponding sulfones in good yields by 3-chloroperoxybenzoic acid (m-CPBA) in water. Single crystal X-ray analysis of pyrazolone sulfone 4aa showed that the major tautomer of pyrazolone sulfones was the amide form instead of the enol form observed for pyrazolone thioethers. Moreover, the C=N double bond isomerized to form an α,β-unsaturated C=C double bond. Conclusion: An efficient method to synthesize pyrazolone thioethers by iodine-catalyzed sulfenylation of pyrazolones with aryl sulfonyl hydrazides in water was developed. Moreover, this method was employed to synthesize pyrazolone sulfones in one-pot by subsequent sulfenylation and oxidation reactions.

Configuration on the C=N double bond of monosubstituted amidines and amidoximes

1989 ◽  
Vol 54 (12) ◽  
pp. 3245-3252 ◽  
Author(s):  
Bernard Tinant ◽  
Janine Dupont-Fenfau ◽  
Jean-Paul Declercq ◽  
Jaroslav Podlaha ◽  
Otto Exner
Keyword(s):  
Double Bond ◽  
Nitrogen Atom ◽  
Steric Effects ◽  
Model Compounds ◽  
X Ray ◽  
Analogous Model

Configuration on the C=N double bond of amidines and amidoximes is controlled by steric effects on the second nitrogen atom but there is a difference in the case of N’-monosubstituted derivatives: amidines prefer E configuration (conformation around the C-N bond sp) and amidoximes Z configuration (conformation ap). This was confirmed by the X-ray structures of two analogous model compounds N,N’-dimethyl-4-nitrobenzamidine (monoclinic, P21c, a = 10.855(3), b = 11.043(3), c = 8.593(3) Å, β = 105.69(2)°, V = 991.8(5) Å3, Z = 4, Dx = 1.29 g cm-3, CuKα, λ = 1.5418 Å, μ = 7.91 cm-1, F(000) = 408, T = 291 K, R = 0.065 for 1 265 observed reflections) and N’-methyl-4-nitrobenzamidoxime (monoclinic, P21/a, a = 6.699(2), b = 24.178(9), c = 6.075(2) Å, β = 106.20(3)°, V = 944.9(6) Å3, Z = 4, Dx = 1.37 g cm-3, CuKα, λ = 1.5418 Å, μ =9.22 cm-1, F(000) = 408, T = 291 K, R = 0.079 for 1 278 observed reflections).

scholarly journals Über die Reaktion von Wolframhexachlorid mit Se4N2; Kristallstruktur von PPh4[WCl5(NSeCl)] / On the Reaction of Tungsten Hexachloride with Se4N2; Crystal Structure of PPh4[WCl5(NSeCl)]

1991 ◽  
Vol 46 (12) ◽  
pp. 1625-1628 ◽  
Author(s):  
Stefan Vogler ◽  
Werner Massa ◽  
Kurt Dehnicke
Keyword(s):  
Crystal Structure ◽  
Double Bond ◽  
Structure Determination ◽  
Space Group ◽  
X Ray ◽  
Bond Lengths ◽  
Tetraphenylphosphonium Chloride ◽  
Tungsten Hexachloride

The reaction of tungsten hexachloride with Se4N2 leads to [WCl4(NSeCl)]2, which reacts with pyridine to form [WCl4(NSeCl)Py], and with tetraphenylphosphonium chloride to form PPh4[WCl5(NSeCl)], which was characterized by an X-ray structure determination. Space group P21, Z = 2, 1657 observed unique reflections, R = 0.074, wR = 0.061. Lattice dimensions at —80 C: a = 710.7(1), b = 2217.9(4), c = 953.6(2) pm; β = 111.93(3) . The [WCl5(NSeCl)]- ion possesses an almost linear WNSe group with bond lengths WN = 188 pm, corresponding to a double bond, and NSe = 200 pm.

Über Derivate des Hydrazins, VII Zur Reaktivität von Bis(trimethylsilyl)aminoisocyanid / On Derivatives of Hydrazine, VII Reactivity of Bis(trimethylsilyl)aminoisocyanide

1977 ◽  
Vol 32 (9) ◽  
pp. 1003-1009 ◽  
Author(s):  
Nils Wiberg ◽  
Gerhard Hübler
Keyword(s):  
Double Bond ◽  
Oxidation State ◽  
Ring Cleavage ◽  
Reaction Paths ◽  
Stable Compound ◽  
Oxidizing Agents ◽  
Formal Oxidation State ◽  
Double Bond System ◽  
Bond System ◽  
Derivatives Of

The chemistry of bis(trimethylsilyl)aminoisocyanide (1) is determined by three reactive centres of the system : the hydrolyzable Si–N-bond, the oxidizable carbon in the formal oxidation state two, the additionable double bond system. Reactions of the oxygen stable compound 1 with halogens X2 or sulfenyl halides RSX as oxidizing agents gives compounds of type (Me3Si)2NNCX2 or (Me3Si)2NNCX(SR). Heterocumulenes such as CO2, CS2, RNCS (R = (Me3Si)2N), SO2 add to 1, leading to heterocycles, which decompose at higher temperatures by ring cleavage. With other heterocumulenes such as PhNCO, Me3SiNSO, Me3SiNSNSiMe3 products are found, the formation of which could be explained by reaction paths including the building and cleavage of heterocycles.

The Structure of Polyisoprenes. II. The Structure of β-Gutta-Percha

1945 ◽  
Vol 18 (2) ◽  
pp. 280-283
Author(s):  
G. A. Jeffrey
Keyword(s):  
Molecular Structure ◽  
Double Bond ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Interatomic Distances ◽  
Methyl Group ◽  
X Ray ◽  
Gutta Percha ◽  
Qualitative Estimate

Abstract The x-ray diffraction data at present available from β-gutta-percha are shown to be insufficient to distinguish fine details of molecular structure. Since a qualitative estimate of the intensities on the fibre diagram can be adequately satisfied by a model having normal interatomic distances and valency angles, no evidence exists for the improbable distortion of the methyl group out of the plane of the double bond previously ascribed to the molecule.

Heterometallische Cluster durch ligandunterstützte Metallfragmentkondensation / Heterometallic Clusters by Ligand Assisted Metal Fragment Condensation

1991 ◽  
Vol 46 (9) ◽  
pp. 1169-1176 ◽  
Author(s):  
Wolfgang Rohde ◽  
Gert Fendesak
Keyword(s):  
Double Bond ◽  
Chelate Complexes ◽  
Heterometallic Clusters ◽  
X Ray ◽  
X Ray Crystallography ◽  
Inert Solvent ◽  
Fragment Condensation ◽  
Olefinic Double Bond ◽  
High Yields ◽  
Iron Fragment

Dicobalt complexes of 3-vinylpropargylic alcohol derivatives react with biscyclooctenetricarbonyliron to give new chelate complexes of the iron tricarbonyl fragment with the olefinic double bond and the alcohol oxygen atom bound to the iron fragment. These compounds react upon heating in an inert solvent to give FeCo-alkynyl cluster complexes in high yields. One of these compounds has been structurally characterized by X-ray crystallography.

scholarly journals Reactions of Dihaloboranes with Electron-Rich 1,4-Bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadienes

Molecules ◽  
2020 ◽  
Vol 25 (12) ◽  
pp. 2875
Author(s):  
Li Ma ◽  
Xiaolin Zhang ◽  
Wenbo Ming ◽  
Shengxin Su ◽  
Xiaoyong Chang ◽  
...  
Keyword(s):  
Double Bond ◽  
Nmr Spectroscopy ◽  
Diffraction Analysis ◽  
1H Nmr Spectroscopy ◽  
Variable Temperature ◽  
Organosilicon Compounds ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multinuclear Nmr Spectroscopy ◽  
Bond Character

The reactions of electron-rich organosilicon compounds 1,4-bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene (1), 2,3,5,6-tetramethyl-1,4-bis(trimethylsilyl)-1,4-diaza-2,5-cyclohexadiene (2), and 1,1′-bis(trimethylsilyl)-1,1′-dihydro-4,4′-bipyridine (12) with B-amino and B-aryl dihaloboranes afforded a series of novel B=N-bond-containing compounds 3–11 and 13. The B=N rotational barriers of 7 (>71.56 kJ/mol), 10 (58.79 kJ/mol), and 13 (58.65 kJ/mol) were determined by variable-temperature 1H-NMR spectroscopy, thus reflecting different degrees of B=N double bond character in the corresponding compounds. In addition, ring external olefin isomers 11 were obtained by a reaction between 2 and DurBBr2. All obtained B=N-containing products were characterized by multinuclear NMR spectroscopy. Compounds 5, 9, 10a, 11, and 13a were also characterized by single-crystal X-ray diffraction analysis.

Synthesis of a Stable Compound with Fivefold Bonding Between Two Chromium(I) Centers

Science ◽  
2005 ◽  
Vol 310 (5749) ◽  
pp. 844-847 ◽  
Author(s):  
Tailuan Nguyen ◽  
Andrew D. Sutton ◽  
Marcin Brynda ◽  
James C. Fettinger ◽  
Gary J. Long ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Room Temperature ◽  
Computational Studies ◽  
X Ray Diffraction ◽  
Electron Pairs ◽  
Stable Compound ◽  
X Ray ◽  
Slight Excess ◽  
Stable Species ◽  
Moisture Sensitive

Although in principle transition metals can form bonds with six shared electron pairs, only quadruply bonded compounds can be isolated as stable species at room temperature. Here we show that the reduction of {Cr(μ-Cl)Ar′}2 [where Ar′ indicates C6H3-2,6(C6H3-2,6-Pri2)2 and Pr indicates isopropyl] with a slight excess of potassium graphite has produced a stable compound with fivefold chromium-chromium (Cr–Cr) bonding. The very air- and moisture-sensitive dark red crystals of Ar′CrCrAr′ were isolated with greater than 40% yield. X-ray diffraction revealed a Cr–Cr bond length of 1.8351(4) angstroms (where the number in parentheses indicates the standard deviation) and a planar transbent core geometry. These data, the structure's temperature-independent paramagnetism, and computational studies support the sharing of five electron pairs in five bonding molecular orbitals between two 3d5 chromium(I) ions.

Structure cristalline et moléculaire d'un composé tricyclique contenant le cycle à dix chaînons dioxo diaza diphosphécine

1992 ◽  
Vol 70 (3) ◽  
pp. 809-816 ◽  
Author(s):  
Brigitte Duthu ◽  
Karim El Abed ◽  
Douraid Houalla ◽  
Robert Wolf ◽  
Joël Jaud
Keyword(s):  
Molecular Structure ◽  
Comparative Analysis ◽  
Double Bond ◽  
Mass Spectroscopy ◽  
Crystal And Molecular Structure ◽  
Accurate Information ◽  
X Ray Diffraction ◽  
X Ray ◽  
Nmr Parameters ◽  
C Nmr

The sulfuration of the tricyclic organophosphorous dimer 2 leads easily to the dithiotricyclic derivative 3, which has been characterized by 31P, 1H, and 13C NMR, elemental analysis, and mass spectroscopy. Its crystal and molecular structure has been established by X-ray diffraction and compared to that of 2, which was previously determined. The comparative analysis of X-ray diffraction and NMR parameters gives accurate information about the molecular structure of both compounds. A numerical value of the anistropy cone of the P=S double bond is proposed. Keywords: phosphecine, NMR, X-ray, tricycle.

Sign in / Sign up

Export Citation Format

Share Document