scholarly journals Structural Evolution of Chemically-Driven RuO2 Nanowires and 3-Dimensional Design for Photo-Catalytic Applications

2015 ◽  
Vol 5 (1) ◽  
Author(s):  
Joonmo Park ◽  
Jae Won Lee ◽  
Byeong Uk Ye ◽  
Sung Hee Chun ◽  
Sang Hoon Joo ◽  
...  
Keyword(s):  
Water Oxidation ◽  
Three Dimensional ◽  
Visible Region ◽  
Structural Evolution ◽  
Photocurrent Density ◽  
Nucleation Theory ◽  
Crystallographic Structure ◽  
3 Dimensional ◽  
Uv Visible ◽  
Solar Water Oxidation

Abstract Growth mechanism of chemically-driven RuO2 nanowires is explored and used to fabricate three-dimensional RuO2 branched Au-TiO2 nanowire electrodes for the photostable solar water oxidation. For the real time structural evolution during the nanowire growth, the amorphous RuO2 precursors (Ru(OH)3·H2O) are heated at 180 °C, producing the RuO2 nanoparticles with the tetragonal crystallographic structure and Ru enriched amorphous phases, observed through the in-situ synchrotron x-ray diffraction and the high-resolution transmission electron microscope images. Growth then proceeds by Ru diffusion to the nanoparticles, followed by the diffusion to the growing surface of the nanowire in oxygen ambient, supported by the nucleation theory. The RuO2 branched Au-TiO2 nanowire arrays shows a remarkable enhancement in the photocurrent density by approximately 60% and 200%, in the UV-visible and Visible region, respectively, compared with pristine TiO2 nanowires. Furthermore, there is no significant decrease in the device’s photoconductance with UV-visible illumination during 1 day, making it possible to produce oxygen gas without the loss of the photoactvity.

Loading the FeNiOOH cocatalyst on Pt-modified hematite nanostructures for efficient solar water oxidation

2016 ◽  
Vol 18 (15) ◽  
pp. 10453-10458 ◽  
Author(s):  
Jiujun Deng ◽  
Xiaoxin Lv ◽  
Hui Zhang ◽  
Binhua Zhao ◽  
Xuhui Sun ◽  
...  
Keyword(s):  
Water Oxidation ◽  
Photocurrent Density ◽  
Onset Potential ◽  
Solar Water ◽  
Solar Water Oxidation

A significant cathodic shift of the onset potential and an enhancement of the photocurrent density can be found in the FeNiOOH-decorated hematite photoanode.

scholarly journals Influence of C3N4 Precursors on Photoelectrochemical Behavior of TiO2/C3N4 Photoanode for Solar Water Oxidation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 974 ◽  
Author(s):  
Swetha S. M. Bhat ◽  
Sang Eon Jun ◽  
Sol A Lee ◽  
Tae Hyung Lee ◽  
Ho Won Jang
Keyword(s):  
Water Oxidation ◽  
Photocurrent Density ◽  
Continuous Illumination ◽  
Photoelectrochemical Performance ◽  
Photoelectrochemical Activity ◽  
Energy Demands ◽  
Photoelectrochemical Response ◽  
Solar Water Oxidation ◽  
Redox Ability ◽  
2D Nanosheets

Photoelectrochemical water splitting is considered as a long-term solution for the ever-increasing energy demands. Various strategies have been employed to improve the traditional TiO2 photoanode. In this study, TiO2 nanorods were decorated by graphitic carbon nitride (C3N4) derived from different precursors such as thiourea, melamine, and a mixture of thiourea and melamine. Photoelectrochemical activity of TiO2/C3N4 photoanode can be modified by tuning the number of precursors used to synthesize C3N4. C3N4 derived from the mixture of melamine and thiourea in TiO2/C3N4 photoanode showed photocurrent density as high as 2.74 mA/cm2 at 1.23 V vs. RHE. C3N4 synthesized by thiourea showed particle-like morphology, while melamine and melamine with thiourea derived C3N4 yielded two dimensional (2D) nanosheets. Nanosheet-like C3N4 showed higher photoelectrochemical performance than that of particle-like nanostructures as specific surface area, and the redox ability of nanosheets are believed to be superior to particle-like nanostructures. TiO2/C3N4 displayed excellent photostability up to 20 h under continuous illumination. Thiourea plays an important role in enhancing the photoelectrochemical performance of TiO2/C3N4. This study emphasizes the fact that the improved photoelectrochemical performance can be achieved by varying the precursors of C3N4 in TiO2/C3N4 heterojunction. This is the first report to show the influence of C3N4 precursors on photoelectrochemical performance in TiO2/C3N4 systems. This would pave the way to explore different precursors influence on C3N4 with respect to the photoelectrochemical response of TiO2/C3N4 heterojunction photoanode.

Sensitivity of HEMATEG Induced by Radiation Dose in the Diagnostic X-Ray Energy Range

2015 ◽  
Vol 1087 ◽  
pp. 267-271
Author(s):  
Siti Atiqah Ishak ◽  
S.M. Iskandar ◽  
Azhar Abdul Rahman
Keyword(s):  
Radiation Dose ◽  
Urbach Energy ◽  
Visible Region ◽  
Band Gap Energy ◽  
Exposure Dose ◽  
Polymer Gel ◽  
Indirect Transition ◽  
X Ray ◽  
3 Dimensional ◽  
Uv Visible

The aim of this study is to determine sensitivity of new recipes polymer gel HEMATEG with varied x-ray exposure by using UV-visible spectrophotometer as an evaluation technique. The gels were irradiated by x-ray radiation and the polymerization of HEMATEG were followed. Polymerization was read based on absorption spectra in the range wavelength UV 300 nm to 700 nm. The dependency of polymerization with increasing of exposure dose was determined by changes in the band gap energy (Eg) and Urbach energy (∆E). In the UV-visible region,Egwith indirect transition of HEMATEG were decreased with increasing radiation dose while,∆Ewere increased with increasing radiation dose. This observation supported the increase of structured disorder of the polymer with increasing radiation dose. This study proved that HEMATEG had a high potential to be used as a 3-dimensional dosimeter in the diagnostic x-ray.

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

Design and calibration of an IVEM for general 3-dimensional imaging of non-diffracting materials

1992 ◽  
Vol 50 (2) ◽  
pp. 1040-1041
Author(s):  
Neil Rowlands ◽  
Jeff Price ◽  
Michael Kersker ◽  
Seichi Suzuki ◽  
Steve Young ◽  
...  
Keyword(s):  
3D Imaging ◽  
Tomographic Reconstruction ◽  
Three Dimensional ◽  
3 Dimensional ◽  
3D Microstructure ◽  
Image Translation ◽  
Digital Correlation ◽  
On Line ◽  
Mechanical Stage ◽  
Projection Angle

Three-dimensional (3D) microstructure visualization on the electron microscope requires that the sample be tilted to different positions to collect a series of projections. This tilting should be performed rapidly for on-line stereo viewing and precisely for off-line tomographic reconstruction. Usually a projection series is collected using mechanical stage tilt alone. The stereo pairs must be viewed off-line and the 60 to 120 tomographic projections must be aligned with fiduciary markers or digital correlation methods. The delay in viewing stereo pairs and the alignment problems in tomographic reconstruction could be eliminated or improved by tilting the beam if such tilt could be accomplished without image translation.A microscope capable of beam tilt with simultaneous image shift to eliminate tilt-induced translation has been investigated for 3D imaging of thick (1 μm) biologic specimens. By tilting the beam above and through the specimen and bringing it back below the specimen, a brightfield image with a projection angle corresponding to the beam tilt angle can be recorded (Fig. 1a).

scholarly journals Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Min Yang ◽  
Lu Wang ◽  
Wentao Yan
Keyword(s):  
Additive Manufacturing ◽  
Phase Field ◽  
Field Model ◽  
Three Dimensional ◽  
Phase Field Model ◽  
Nucleation Theory ◽  
Experimental Result ◽  
Classical Nucleation Theory ◽  
Validation Experiment ◽  
Powder Particles

AbstractA three-dimensional phase-field model is developed to simulate grain evolutions during powder-bed-fusion (PBF) additive manufacturing, while the physically-informed temperature profile is implemented from a thermal-fluid flow model. The phase-field model incorporates a nucleation model based on classical nucleation theory, as well as the initial grain structures of powder particles and substrate. The grain evolutions during the three-layer three-track PBF process are comprehensively reproduced, including grain nucleation and growth in molten pools, epitaxial growth from powder particles, substrate and previous tracks, grain re-melting and re-growth in overlapping zones, and grain coarsening in heat-affected zones. A validation experiment has been carried out, showing that the simulation results are consistent with the experimental results in the molten pool and grain morphologies. Furthermore, the grain refinement by adding nanoparticles is preliminarily reproduced and compared against the experimental result in literature.

scholarly journals Comparative Study of Silk Fibroin-Based Hydrogels and Their Potential as Material for 3-Dimensional (3D) Printing

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3887
Author(s):  
Watcharapong Pudkon ◽  
Chavee Laomeephol ◽  
Siriporn Damrongsakkul ◽  
Sorada Kanokpanont ◽  
Juthamas Ratanavaraporn
Keyword(s):  
3D Printing ◽  
Silk Fibroin ◽  
Biomedical Applications ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Structure Stability ◽  
3 Dimensional ◽  
Critical Technology ◽  
Box Structure ◽  
High Degree

Three-dimensional (3D) printing is regarded as a critical technology in material engineering for biomedical applications. From a previous report, silk fibroin (SF) has been used as a biomaterial for tissue engineering due to its biocompatibility, biodegradability, non-toxicity and robust mechanical properties which provide a potential as material for 3D-printing. In this study, SF-based hydrogels with different formulations and SF concentrations (1–3%wt) were prepared by natural gelation (SF/self-gelled), sodium tetradecyl sulfate-induced (SF/STS) and dimyristoyl glycerophosphorylglycerol-induced (SF/DMPG). From the results, 2%wt SF-based (2SF) hydrogels showed suitable properties for extrusion, such as storage modulus, shear-thinning behavior and degree of structure recovery. The 4-layer box structure of all 2SF-based hydrogel formulations could be printed without structural collapse. In addition, the mechanical stability of printed structures after three-step post-treatment was investigated. The printed structure of 2SF/STS and 2SF/DMPG hydrogels exhibited high stability with high degree of structure recovery as 70.4% and 53.7%, respectively, compared to 2SF/self-gelled construct as 38.9%. The 2SF/STS and 2SF/DMPG hydrogels showed a great potential to use as material for 3D-printing due to its rheological properties, printability and structure stability.

A semiconducting polymer bulk heterojunction photoanode for solar water oxidation

2021 ◽  
Vol 4 (5) ◽  
pp. 431-438
Author(s):  
Han-Hee Cho ◽  
Liang Yao ◽  
Jun-Ho Yum ◽  
Yongpeng Liu ◽  
Florent Boudoire ◽  
...  
Keyword(s):  
Water Oxidation ◽  
Bulk Heterojunction ◽  
Semiconducting Polymer ◽  
Solar Water ◽  
Polymer Bulk ◽  
Solar Water Oxidation

Clinical Utility of an Exoskeleton Robot Using 3-Dimensional Scanner Modeling in Burn Patient: A Case Report

2021 ◽  
Author(s):  
So Young Joo ◽  
Seung Yeol Lee ◽  
Yoon Soo Cho ◽  
Sangho Yi ◽  
Cheong Hoon Seo
Keyword(s):  
Burn Injury ◽  
Hand Function ◽  
Three Dimensional ◽  
The Body ◽  
3D Technology ◽  
Early Management ◽  
3 Dimensional ◽  
Exoskeleton Robot ◽  
Physical Abilities ◽  
Upper Limb Dysfunction

Abstract Hands are the part of the body that are most commonly involved in burns, and the main complications are finger joint contractures and nerve injuries. Hypertrophic scarring cannot be avoided despite early management of acute hand burn injuries, and some patients may need application of an exoskeleton robot to restore hand function. To do this, it is essential to individualize the customization of the robot for each patient. Three-dimensional (3D) technology, which is widely used in the field of implants, anatomical models, and tissue fabrication, makes this goal achievable. Therefore, this report is a study on the usefulness of an exoskeleton robot using 3D technology for patients who lost bilateral hand function due to burn injury. Our subject was a 45-year-old man with upper limb dysfunction of 560 days after a flame and chemical burn injury, with resultant impairment of manual physical abilities. After wearing an exoskeleton robot made using 3D printing technology, he could handle objects effectively and satisfactorily. This innovative approach provided considerable advantages in terms of customization of size and reduction in manufacturing time and costs, thereby showing great potential for use in patients with hand dysfunction after burn injury.

Sign in / Sign up

Export Citation Format

Share Document