How Much Processing Time Is Needed to Drive Perceptual Recalibration of Speech?

2014 ◽  
Author(s):  
Arthur Samuel
Keyword(s):  
Processing Time

A new tool for rapid development of electron microscopy negatives and micrographs: Initial impressions of the MOHR/PRO-8 processor

1992 ◽  
Vol 50 (2) ◽  
pp. 972-973
Author(s):  
James C. Long
Keyword(s):  
Electron Microscopy ◽  
Processing Time ◽  
Rapid Development ◽  
Processing Times ◽  
Initial Impressions ◽  
Transport Method

Over the years, many techniques and products have been developed to reduce the amount of time spent in a darkroom processing electron microscopy negatives and micrographs. One of the latest tools, effective in this effort, is the Mohr/Pro-8 film and rc paper processor.At the time of writing, a unit has been recently installed in the photographic facilities of the Electron Microscopy Center at Texas A&M University. It is being evaluated for use with TEM sheet film, SEM sheet film, 35mm roll film (B&W), and rc paper.Originally designed for use in the phototypesetting industry, this processor has only recently been introduced to the field of electron microscopy.The unit is a tabletop model, approximately 1.5 × 1.5 × 2.0 ft, and uses a roller transport method of processing. It has an adjustable processing time of 2 to 6.5 minutes, dry-to-dry. The installed unit has an extended processing switch, enabling processing times of 8 to 14 minutes to be selected.

Classifying the Past: Discriminant Analysis and its Application to Medieval Farming Systems

1996 ◽  
Vol 8 (1) ◽  
pp. 1-10 ◽  
Author(s):  
Ken Bartley
Keyword(s):  
Cluster Analysis ◽  
Discriminant Analysis ◽  
Processing Time ◽  
Farming Systems ◽  
Frame Of Reference ◽  
Analytical Models ◽  
Successful Implementation ◽  
Medieval Period ◽  
The Past ◽  
Livestock Management

This paper discusses the need for nationally based analytical models of the medieval period. The use of cluster analysis as a method for classifying demesne farms, by the crops they grew and their livestock management, is explained. Successful implementation of cluster analysis requires both the existence of a large base sample, to permit isolation of specific groupings within the data, and access to considerable processing time. The paper concludes by demonstrating how discriminant analysis can provide an efficient and systematic way of classifying even a single manor within a national frame of reference.

INFLUENCE OF FORCED CONVECTION IN LIQUID INSIDE THE TIN ON DURATION OF STERILIZATION IN THE COURSE OF FISH PROCESSING

2017 ◽  
pp. 137-144
Author(s):  
Gennadiy Valentinovich Alexeev ◽  
Elena Igorevna Verboloz
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Forced Convection ◽  
Thermal Process ◽  
Processing Time ◽  
Fish Processing ◽  
Study Results ◽  
Equipment Modernization ◽  
Bottom To Top

The article focuses on the process of intensive mixing of liquid phase in the tin during high-temperature sterilization, i.e. sterilization when temperature of the heat carrier reaches 150-160°C. It has been stated that for intensification of the thermal process during sterilization of tinned fish with liquid filling it is preferable to turn a tin from bottom to top. This operation helps to increase the driving power of the process and to shorten warming time. Besides, high-temperature sterilization carried out according to experimental modes, where the number of tin turnovers is calculated, greatly shortens processing time and improves quality of the product. In this case there is no superheating, all tins are evenly heated. The study results will contribute to equipment modernization and to preserving valuable food qualities.

Perancangan dan Pembuatan Alat Bantu Meja Putar untuk Mesin Cnc 4 Axis

2016 ◽  
Vol 10 (2) ◽  
pp. 162-171
Author(s):  
Hafid Hafid ◽  
Tatang Sutisna
Keyword(s):  
Processing Time ◽  
Rotary Table ◽  
Engineering Process ◽  
Cnc Machine ◽  
Economical Analysis ◽  
Machining Center ◽  
Design And Manufacturing ◽  
The Cost ◽  
Productivity And Competitiveness

The design and manufacturing of the rotary table with the specification Ø 170 mm (6 inches) for CNC machine 4 axis has been done. The objective of manufacturing a rotary table is to increase the efficiency of CNC machine Hardford 4 axis to be above 80% in line machining center CV. IM’s workshop. The engineering methods was taken, consist of: working preparation, manufacturing of working drawing, engineering process, the manufacturing and testing. The prototype has been tested and operated, the resulting of increasing productivity of which were as follows: the process of assembling was increased to be 3 time ( before 1 time) and processing time for a specific case reduced from 5 hours to 3 hours, number of operators for the case of assembling the rotary reduced to 1 person (before 4 persons), safety and security become to be better. The results show increased efficiency of CNC machine Hardford, from under 50% to be above 80%. Based on the economical analysis obtained by the cost of good sold (C.G.S) of the rotary table is IDR 34.060.000. The results presented in this paper is expected to be case study for developing a business of the metal and engineering SMEs domestic to the effort of improving efficiency, quality, productivity and competitiveness in global market.ABSTRAKPerancangan dan pembuatan alat bantu meja putar (rotary table) dengan spesifikasi teknis Ø 170 mm (6 inci) untuk mesin CNC 4 axis telah dilakukan. Tujuan pembuatan rotary table adalah untuk meningkatkan efisiensi mesin CNC Hardford 4 axis di atas 80% pada line machining center Bengkel CV. IM. Metode rancang bangun yang dilakukan, meliputi: persiapan kerja, pembuatan gambar kerja, proses engineering, pembuatan dan uji coba. Prototip tersebut telah diuji coba dan dioperasikan dengan hasil peningkatan produktivitas sebagai berikut: proses pengerjaan bongkar pasang meningkat menjadi 3 kali (sebelumnya 1 kali) dan waktu pengerjaan untuk kasus tertentu berkurang dari 5 jam menjadi 3 jam, jumlah operator untuk kasus bongkar pasang rotary berkurang menjadi 1 orang (sebelumnya 4 orang), keselamatan kerja dan keamanan menjadi lebih baik. Hasil peningkatan berupa efisiensi mesin CNC Hardford 4 axis dari sebelumnya di bawah 50% menjadi di atas 80%. Berdasarkan hasil perhitungan analisis ekonomi diperoleh harga pokok produksi (HPP) alat bantu meja putar adalah sebesar Rp. 34.060.000. Bahasan ini diharapkan menjadi contoh kasus bagi pengembangan usaha IKM logam dan mesin dalam negeri untuk meningkatkan efisiensi, mutu, produktivitas dan keunggulan daya saing di pasar global.Kata kunci: alat bantu meja putar, mesin CNC, harga pokok produksi

Removal of copper (Cu2+) by preparation modified carbon from macadamia shells by chemical agent with H2O2 in wastewater

2020 ◽  
pp. 215-221
Keyword(s):  
Heavy Metal ◽  
Processing Time ◽  
Chemical Agent ◽  
Optimum Conditions ◽  
Adsorption Ability

Macadamia shells were used to prepare modified carbon by chemical agent H2O2 (25%) in 48 hours with coke ratio: H2O2 = 1:10. Modified carbon from Macadamia shells with chemical agent H2O2 has capable of adsorption heavy metal copper (Cu 2+) at an assumption concentration is 30ppm in the optimum conditions such as pH = 4, dose is 1.8 g/l, and the processing time is 30 minutes. The result showed that the adsorption ability of the material reached the highest efficiency is 78.33%. This result showed that modified carbon from shells Macadamia by chemical agent H2O2 capable of removing applications on heavy metal copper (Cu2+) in wastewater.

Sign in / Sign up

Export Citation Format

Share Document