First in situ temperature measurements in the summer mesosphere at very high latitudes (78°N)

2003 ◽  
Vol 108 (D8) ◽  
Author(s):  
Franz-Josef Lübken
Keyword(s):  
Temperature Measurements ◽  
High Latitudes ◽  
Very High

scholarly journals Critical Dynamics of Defects and Mechanisms of Damage-Failure Transitions in Fatigue

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2554
Author(s):  
Oleg Naimark ◽  
Vladimir Oborin ◽  
Mikhail Bannikov ◽  
Dmitry Ledon
Keyword(s):  
Fatigue Damage ◽  
Kinetic Equations ◽  
Experimental Methodology ◽  
Preliminary Deformation ◽  
Scaling Properties ◽  
In Situ Data ◽  
Number Of Cycles ◽  
Fish Eye ◽  
Very High

An experimental methodology was developed for estimating a very high cycle fatigue (VHCF) life of the aluminum alloy AMG-6 subjected to preliminary deformation. The analysis of fatigue damage staging is based on the measurement of elastic modulus decrement according to “in situ” data of nonlinear dynamics of free-end specimen vibrations at the VHCF test. The correlation of fatigue damage staging and fracture surface morphology was studied to establish the scaling properties and kinetic equations for damage localization, “fish-eye” nucleation, and transition to the Paris crack kinetics. These equations, based on empirical parameters related to the structure of the material, allows us to estimate the number of cycles for the nucleation and advance of fatigue crack.

scholarly journals A Pixel Design of a Branching Ultra-Highspeed Image Sensor

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2506
Author(s):  
Nguyen Hoai Ngo ◽  
Kazuhiro Shimonomura ◽  
Taeko Ando ◽  
Takayoshi Shimura ◽  
Heiji Watanabe ◽  
...  
Keyword(s):  
Image Sensor ◽  
Frame Rate ◽  
Front Side ◽  
Digital Signals ◽  
Memory Element ◽  
Image Capture ◽  
Readout Circuits ◽  
Pros And Cons ◽  
Very High

A burst image sensor named Hanabi, meaning fireworks in Japanese, includes a branching CCD and multiple CMOS readout circuits. The sensor is backside-illuminated with a light/charge guide pipe to minimize the temporal resolution by suppressing the horizontal motion of signal carriers. On the front side, the pixel has a guide gate at the center, branching to six first-branching gates, each bifurcating to second-branching gates, and finally connected to 12 (=6×2) floating diffusions. The signals are either read out after an image capture operation to replay 12 to 48 consecutive images, or continuously transferred to a memory chip stacked on the front side of the sensor chip and converted to digital signals. A CCD burst image sensor enables a noiseless signal transfer from a photodiode to the in-situ storage even at very high frame rates. However, the pixel count conflicts with the frame count due to the large pixel size for the relatively large in-pixel CCD memory elements. A CMOS burst image sensor can use small trench-type capacitors for memory elements, instead of CCD channels. However, the transfer noise from a floating diffusion to the memory element increases in proportion to the square root of the frame rate. The Hanabi chip overcomes the compromise between these pros and cons.

scholarly journals Influence of Hydrogeochemistry on Tunnel Drainage in Evaporitic Formations: El Regajal Tunnel Case Study (Aranjuez, Spain)

2021 ◽  
Vol 13 (3) ◽  
pp. 1505
Author(s):  
Ignacio Menéndez Pidal ◽  
Jose Antonio Mancebo Piqueras ◽  
Eugenio Sanz Pérez ◽  
Clemente Sáenz Sanz
Keyword(s):  
High Speed ◽  
Civil Engineering ◽  
Saturation Index ◽  
The Subject ◽  
Under Construction ◽  
Underground Flow ◽  
Very High ◽  
Over Time

Many of the large number of underground works constructed or under construction in recent years are in unfavorable terrains facing unusual situations and construction conditions. This is the case of the subject under study in this paper: a tunnel excavated in evaporitic rocks that experienced significant karstification problems very quickly over time. As a result of this situation, the causes that may underlie this rapid karstification are investigated and a novel methodology is presented in civil engineering where the use of saturation indices for the different mineral specimens present has been crucial. The drainage of the rock massif of El Regajal (Madrid-Toledo, Spain, in the Madrid-Valencia high-speed train line) was studied and permitted the in-situ study of the hydrogeochemical evolution of water flow in the Miocene evaporitic materials of the Tajo Basin as a full-scale testing laboratory, that are conforms as a whole, a single aquifer. The work provides a novel methodology based on the calculation of activities through the hydrogeochemical study of water samples in different piezometers, estimating the saturation index of different saline materials and the dissolution capacity of the brine, which is surprisingly very high despite the high electrical conductivity. The circulating brine appears unsaturated with respect to thenardite, mirabilite, epsomite, glauberite, and halite. The alteration of the underground flow and the consequent renewal of the water of the aquifer by the infiltration water of rain and irrigation is the cause of the hydrogeochemical imbalance and the modification of the characteristics of the massif. These modifications include very important loss of material by dissolution, altering the resistance of the terrain and the increase of the porosity. Simultaneously, different expansive and recrystallization processes that decrease the porosity of the massif were identified in the present work. The hydrogeochemical study allows the evolution of these phenomena to be followed over time, and this, in turn, may facilitate the implementation of preventive works in civil engineering.

Investigation of Emulsion Flow in Steam-Assisted Gravity Drainage

SPE Journal ◽  
2013 ◽  
Vol 18 (03) ◽  
pp. 440-447 ◽  
Author(s):  
C.C.. C. Ezeuko ◽  
J.. Wang ◽  
I.D.. D. Gates
Keyword(s):  
Experimental Data ◽  
Numerical Simulation ◽  
Oil Recovery ◽  
Vital Role ◽  
Gravity Drainage ◽  
Steam Assisted Gravity Drainage ◽  
Emulsion Flow ◽  
Very High ◽  
Effective Representation

Summary We present a numerical simulation approach that allows incorporation of emulsion modeling into steam-assisted gravity-drainage (SAGD) simulations with commercial reservoir simulators by means of a two-stage pseudochemical reaction. Numerical simulation results show excellent agreement with experimental data for low-pressure SAGD, accounting for approximately 24% deficiency in simulated oil recovery, compared with experimental data. Incorporating viscosity alteration, multiphase effect, and enthalpy of emulsification appears sufficient for effective representation of in-situ emulsion physics during SAGD in very-high-permeability systems. We observed that multiphase effects appear to dominate the viscosity effect of emulsion flow under SAGD conditions of heavy-oil (bitumen) recovery. Results also show that in-situ emulsification may play a vital role within the reservoir during SAGD, increasing bitumen mobility and thereby decreasing cumulative steam/oil ratio (cSOR). Results from this work extend understanding of SAGD by examining its performance in the presence of in-situ emulsification and associated flow of emulsion with bitumen in porous media.

scholarly journals Asymmetric Pd-NHC*-catalyzed coupling reactions

2012 ◽  
Vol 84 (8) ◽  
pp. 1741-1748 ◽  
Author(s):  
E. Peter Kündig ◽  
Yixia Jia ◽  
Dmitry Katayev ◽  
Masafumi Nakanishi
Keyword(s):  
High Temperature ◽  
Coupling Reactions ◽  
Structural Studies ◽  
Methylene Unit ◽  
Asymmetric Coupling ◽  
New Applications ◽  
Very High

Very high asymmetric inductions result in the Pd-catalyzed intramolecular arylation of amides to give 3,3-disubstituted oxindoles when new in situ-generated chiral N-heterocyclic carbene (NHC*) ligands are employed. Structural studies show that conformational locking to minimize allylic strain is the key to understanding the function of these ligands. New applications of these ligands in the frontier area of asymmetric coupling reactions involving C(sp3)–H bonds are detailed. Highly enantioenriched fused indolines are accessible using either preformed- or in situ-generated Pd-NHC* catalysts. Remarkably, this occurs at high temperature (140–160 °C) via excellent asymmetric recognition of an enantiotopic C–H bond in an unactivated methylene unit.

Monitoring and assessment of an oil spill event with very high resolution tools. 

2021 ◽  
Author(s):  
Ana M. Mancho ◽  
Guillermo García-Sánchez ◽  
Antonio G. Ramos ◽  
Josep Coca ◽  
Begoña Pérez-Gómez ◽  
...  
Keyword(s):  
High Resolution ◽  
Oil Spill ◽  
In Situ Observation ◽  
The European Union ◽  
Horizon 2020 ◽  
Research And Innovation ◽  
Port Authorities ◽  
Different Sources ◽  
Very High

<p>This presentation discusses a downstream application from Copernicus Services, developed in the framework of the IMPRESSIVE project, for the monitoring of  the oil spill produced after the crash of the ferry “Volcan de Tamasite” in waters of the Canary Islands on the 21<sup>st</sup> of April 2017. The presentation summarizes the findings of [1] that describe a complete monitoring of the diesel fuel spill, well-documented by port authorities. Complementary information supplied by different sources enhances the description of the event. We discuss the performance of very high resolution hydrodynamic models in the area of the Port of Gran Canaria and their ability for describing the evolution of this event. Dynamical systems ideas support the comparison of different models performance. Very high resolution remote sensing products and in situ observation validate the description.</p><p>Authors acknowledge support from IMPRESSIVE a project funded by the European Union’s Horizon 2020 research and innovation programme under grant agreement No 821922. SW acknowledges the support of ONR Grant No. N00014-01-1-0769</p><p><strong>References</strong></p><p>[1] G.García-Sánchez, A. M. Mancho, A. G. Ramos, J. Coca, B. Pérez-Gómez, E. Álvarez-Fanjul, M. G. Sotillo, M. García-León, V. J. García-Garrido, S. Wiggins. Very High Resolution Tools for the Monitoring and Assessment of Environmental Hazards in Coastal Areas.  Front. Mar. Sci. (2021) doi: 10.3389/fmars.2020.605804.</p>

Mechanically Aspirated Solar Radiation Shields: A CFD and Neural Network Design Analysis

2001 ◽  
Author(s):  
B. M. Fichera ◽  
R. L. Mahajan ◽  
T. W. Horst
Keyword(s):  
Neural Network ◽  
Solar Radiation ◽  
Temperature Sensor ◽  
Temperature Measurements ◽  
Analysis And Design ◽  
Computational Fluid Dynamics Analysis ◽  
Radiation Shields ◽  
Input Variables ◽  
The Relationship

Abstract Accurate air temperature measurements made by surface meteorological stations are demanded by climate research programs for various uses. Heating of the temperature sensor due to inadequate coupling with the environment can lead to significant errors. Therefore, accurate in-situ temperature measurements require shielding the sensor from exposure to direct and reflected solar radiation, while also allowing the sensor to be brought into contact with atmospheric air at the ambient temperature. The difficulty in designing a radiation shield for such a temperature sensor lies in satisfying these two conditions simultaneously. In this paper, we perform a computational fluid dynamics analysis of mechanically aspirated radiation shields (MARS) to study the effect of geometry, wind speed, and interplay of multiple heat transfer processes. Finally, an artificial neural network model is developed to learn the relationship between the temperature error and specified input variables. The model is then used to perform a sensitivity analysis and design optimization.

scholarly journals High sampling rate thermistor string observations at the slope of Great Meteor Seamount

Ocean Science ◽  
2005 ◽  
Vol 1 (1) ◽  
pp. 17-28 ◽  
Author(s):  
H. van Haren ◽  
R. Groenewegen ◽  
M. Laan ◽  
B. Koster
Keyword(s):  
High Frequency ◽  
North Atlantic Ocean ◽  
Sampling Rate ◽  
Very High Frequency ◽  
High Sampling ◽  
High Sampling Rate ◽  
In Situ Calibration ◽  
Great Meteor Seamount ◽  
Very High

Abstract. A high sampling rate (1 Hz) thermistor string has been built to accommodate the scientific need to accurately monitor high-frequency and vigorous internal wave and overturning processes in the ocean. The thermistors and their custom designed electronics can register temperature at an estimated precision of about 0.001° C with a response time faster than 0.25 s down to depths of 6000 m. With a quick in situ calibration using SBE 911 CTD an absolute accuracy of 0.005° C is obtained. The present string holds 128 sensors at 0.5 m intervals, which are all read-out within 0.5 s. When sampling at 1 Hz, the batteries and the memory capacity of the recorder allow for deployments of up to 2 weeks. In this paper, the instrument is described in some detail. Its performance is illustrated with examples from the first moored observations, which show Kelvin-Helmholtz overturning and very high-frequency (Doppler-shifted) internal waves besides occasionally large turbulent bores moving up the sloping side of Great Meteor Seamount, Canary Basin, North-Atlantic Ocean.

Use of an FBG Sensor for In-situ Temperature Measurements of Gas Dielectric Barrier Discharges

2012 ◽  
Author(s):  
Meenu Ahlawat ◽  
Bachir Saoudi ◽  
Elton Soares de Lima Filho ◽  
Michael R. Wertheimer ◽  
Raman Kashyap
Keyword(s):  
Temperature Measurements ◽  
Dielectric Barrier Discharges ◽  
Dielectric Barrier ◽  
Fbg Sensor ◽  
Barrier Discharges

Investigation of Magnetic Order in Iron Oxide-Nickel Oxide Superlattices with Modulation Wavelength Less Than 80 Å

1991 ◽  
Vol 231 ◽  
Author(s):  
S. D. Berry ◽  
D. M. Lind ◽  
G. Chern ◽  
H. Mathias ◽  
L. R. Testardi
Keyword(s):  
Magnetic Order ◽  
Spontaneous Magnetization ◽  
X Ray Diffraction ◽  
High Crystalline Quality ◽  
X Ray ◽  
Long Wavelength ◽  
Saturation Moment ◽  
Very High ◽  
Modulation Wavelength

AbstractWe have investigated the magnetic order, using SQUID magnetometry, for short modulation wavelength Fe3O4/NiO superlattices, grown on single crystal MgO. Ferrimagnetic Fe3O4 has a saturation moment of ~500 emu/cm3 at 0 K and a Curie temperature of 858 K, while bulk NiO is antiferromagnetic with a NMel temperature of 525 K. Very high crystalline quality with little interdiffusion is indicated by X-ray diffraction, SEM, optical microscopy, and in-situ RHEED, and the samples show highly anisotropic electrical conductivity which also indicates the strong modulation present. Long wavelength samples (Amod > 200 Å) have a behavior only slightly different from that expected from bulk Fe3O4, but for Amod<80 Å, spontaneous magnetization is replaced by paramagnetism, with weak temperature dependence (not I/T) from 5 K to 400 K.

Sign in / Sign up

Export Citation Format

Share Document