Well-Defined Fullerene-Containing Homopolymers and Diblock Copolymers with High Fullerene Content and Their Use for Solution-Phase and Bulk Organization

2006 ◽  
Vol 39 (1) ◽  
pp. 70-72 ◽  
Author(s):  
Zachary T. Ball ◽  
Kevin Sivula ◽  
Jean M. J. Fréchet
Keyword(s):  
Diblock Copolymers ◽  
Solution Phase ◽  
High Fullerene ◽  
Fullerene Content

Synthesis and Characterisation of High Fullerene Content Polymers and Their Use in Organic Photovoltaic Devices

2015 ◽  
Vol 68 (11) ◽  
pp. 1767 ◽  
Author(s):  
Sean M. Clark ◽  
Jonathan A. Campbell ◽  
David A. Lewis
Keyword(s):  
Acid Methyl Ester ◽  
Organic Photovoltaic ◽  
Maximum Efficiency ◽  
Photovoltaic Devices ◽  
Organic Photovoltaic Devices ◽  
Bulk Heterojunctions ◽  
Reversible Addition ◽  
High Fullerene ◽  
Conversion Efficiencies ◽  
Fullerene Content

Narrow dispersity polymers with a high tethered fullerene content were synthesised by first polymerising poly(chloromethyl styrene) using reversible addition–fragmentation chain transfer (RAFT) polymerisation and subsequently functionalising them with pristine fullerene. The polymers comprised 52 % by weight fullerene, corresponding to approximately one fullerene per monomer in the polymer with a different morphology to poly(3-hexyl thiophene) (P3HT) : phenyl-C61-butyric acid methyl ester (PCBM) systems. Bulk heterojunctions formed from the polymer tethered fullerene (PTF) with P3HT yielded functioning organic photovoltaic devices with power conversion efficiencies ranging from 0.0030 to 0.22 % as the PTF was increased from 1 : 0.8 to 1 : 1.3. Process optimisation resulted in a maximum efficiency of 0.4 %.

Transition alpha structure in beta-isomorphous Nb-Hf alloys

1987 ◽  
Vol 45 ◽  
pp. 232-233
Author(s):  
R.W. Carpenter ◽  
Changhai Li ◽  
David J. Smith
Keyword(s):  
Solid Solution ◽  
Solution Phase ◽  
Miscibility Gap ◽  
Large Strains ◽  
Solid Solution Phase ◽  
Two Phase ◽  
Diffuse Intensity ◽  
Metastable Form ◽  
The Matrix ◽  
Equilibrium Morphology

Binary Nb-Hf alloys exhibit a wide bcc solid solution phase field at temperatures above the Hfα→ß transition (2023K) and a two phase bcc+hcp field at lower temperatures. The β solvus exhibits a small slope above about 1500K, suggesting the possible existence of a miscibility gap. An earlier investigation showed that two morphological forms of precipitate occur during the bcc→hcp transformation. The equilibrium morphology is rod-type with axes along <113> bcc. The crystallographic habit of the rod precipitate follows the Burgers relations: {110}||{0001}, <112> || <1010>. The earlier metastable form, transition α, occurs as thin discs with {100} habit. The {100} discs induce large strains in the matrix. Selected area diffraction examination of regions ∼2 microns in diameter containing many disc precipitates showed that, a diffuse intensity distribution whose symmetry resembled the distribution of equilibrium α Bragg spots was associated with the disc precipitate.

Morphological behavior of compatibilized ternary blends prepared by mechanical mixing

1993 ◽  
Vol 51 ◽  
pp. 1200-1201
Author(s):  
S.D. Smith ◽  
R.J. Spontak ◽  
D.H. Melik ◽  
S.M. Buehler ◽  
K.M. Kerr ◽  
...  
Keyword(s):  
Interfacial Adhesion ◽  
Diblock Copolymers ◽  
Ternary Blends ◽  
Mechanical Mixing ◽  
Design Considerations ◽  
Covalently Bonded ◽  
Homopolymer Blends ◽  
Emulsifying Agent ◽  
Surface Active ◽  
Low Entropy

When blended together, homopolymers A and B will normally macrophase-separate into relatively large (≫1 μm) A-rich and B-rich phases, between which exists poor interfacial adhesion, due to a low entropy of mixing. The size scale of phase separation in such a blend can be reduced, and the extent of interfacial A-B contact and entanglement enhanced, via addition of an emulsifying agent such as an AB diblock copolymer. Diblock copolymers consist of a long sequence of A monomers covalently bonded to a long sequence of B monomers. These materials are surface-active and decrease interfacial tension between immiscible phases much in the same way as do small-molecule surfactants. Previous studies have clearly demonstrated the utility of block copolymers in compatibilizing homopolymer blends and enhancing blend properties such as fracture toughness. It is now recognized that optimization of emulsified ternary blends relies upon design considerations such as sufficient block penetration into a macrophase (to avoid block slip) and prevention of a copolymer multilayer at the A-B interface (to avoid intralayer failure).

Triply-periodic nanostructures in surfactant, block copolymer, and biomembrane systems, and simulation of TEMs

1993 ◽  
Vol 51 ◽  
pp. 884-885
Author(s):  
David M. Anderson ◽  
Tomas Landh
Keyword(s):  
Liquid Crystalline ◽  
Diblock Copolymers ◽  
Cubic Phase ◽  
List Type ◽  
Interpenetrating Networks ◽  
Triply Periodic ◽  
Wide Range ◽  
Bicontinuous Cubic ◽  
Phase Liquid ◽  
Dividing Surface

First discovered in surfactant-water liquid crystalline systems, so-called ‘bicontinuous cubic phases’ have the property that hydropnilic and lipophilic microdomains form interpenetrating networks conforming to cubic lattices on the scale of nanometers. Later these same structures were found in star diblock copolymers, where the simultaneous continuity of elastomeric and glassy domains gives rise to unique physical properties. Today it is well-established that the symmetry and topology of such a morphology are accurately described by one of several triply-periodic minimal surfaces, and that the interface between hydrophilic and hydrophobic, or immiscible polymer, domains is described by a triply-periodic surface of constant, nonzero mean curvature. One example of such a dividing surface is shown in figure 5.The study of these structures has become of increasing importance in the past five years for two reasons:1)Bicontinuous cubic phase liquid crystals are now being polymerized to create microporous materials with monodispersed pores and readily functionalizable porewalls; figure 3 shows a TEM from a polymerized surfactant / methylmethacrylate / water cubic phase; and2)Compelling evidence has been found that these same morphologies describe biomembrane systems in a wide range of cells.

Equilibrium emulsification of polymer blends by diblock copolymers

1990 ◽  
Vol 51 (2) ◽  
pp. 185-200 ◽  
Author(s):  
Zhen-Gang Wang ◽  
S.A. Safran
Keyword(s):  
Polymer Blends ◽  
Diblock Copolymers

Mechanical and Structural Consequences of Associative Dynamic Cross-Linking in Acrylic Diblock Copolymers

2019 ◽  
Author(s):  
Jacob Ishibashi ◽  
Yan Fang ◽  
Julia Kalow
Keyword(s):  
Block Copolymers ◽  
Rheological Properties ◽  
Diblock Copolymers ◽  
Cross Linking ◽  
Statistical Copolymer

<p>Block copolymers are used to construct covalent adaptable networks that employ associative exchange chemistry (vitrimers). The resulting vitrimers display markedly different nanostructural, thermal and rheological properties relative to those of their statistical copolymer-derived counterparts. This study demonstrates that prepolymer sequence is a versatile strategy to modify the properties of vitrimers.</p>

Sign in / Sign up

Export Citation Format

Share Document