Evaluation of Methods for Determining the Pore Size Distribution and Pore-Network Connectivity of Porous Carbons

Langmuir ◽  
2007 ◽  
Vol 23 (16) ◽  
pp. 8430-8440 ◽  
Author(s):  
Q. Cai ◽  
A. Buts ◽  
M. J. Biggs ◽  
N. A. Seaton
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Network Connectivity ◽  
Pore Network ◽  
Porous Carbons ◽  
Evaluation Of Methods

Porosity and pore size distribution of shales: a case study of the Carynginia Formation, Perth Basin, Western Australia

2017 ◽  
Vol 57 (2) ◽  
pp. 660
Author(s):  
M. Nadia Testamanti ◽  
Reza Rezaee ◽  
Jie Zou
Keyword(s):  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Gas Adsorption ◽  
Pore Network ◽  
Pore Sizes ◽  
Wide Range ◽  
Pore Characterisation ◽  
Shale Reservoirs ◽  
Mercury Injection Capillary Pressure

The evaluation of the gas storage potential of shale reservoirs requires a good understanding of their pore network. Each of the laboratory techniques used for pore characterisation can be applied to a specific range of pore sizes; but if the lithology of the rock is known, usually one suitable method can be selected to investigate its pore system. Shales do not fall under any particular lithological classification and can have a wide range of minerals present, so a combination of at least two methods is typically recommended for a better understanding of their pore network. In the laboratory, the Low-Pressure Nitrogen Gas Adsorption (LP-N2-GA) technique is typically used to examine micropores and mesopores, and Mercury Injection Capillary Pressure (MICP) tests can identify pore throats larger than 3 nm. In contrast, a wider range of pore sizes in rock can be screened with Nuclear Magnetic Resonance (NMR), either in laboratory measurements made on cores or through well logging, provided that the pores are saturated with a fluid. The pore network of a set of shale core samples from the Carynginia Formation was investigated using a combination of laboratory methods. The cores were studied using the NMR, LP-N2-GA and MICP techniques, and the experimental porosity and pore size distribution results are presented. When NMR results were calibrated with MICP or LP-N2-GA measurements, then the pore size distribution of the shale samples studied could be estimated.

scholarly journals Pore Network Analysis of Zone Model for Porous Media Drying

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Yuan Yuejin ◽  
Zhao Zhe ◽  
Nie Junnan ◽  
Xu Yingying
Keyword(s):  
Porous Media ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Phase Distribution ◽  
Pore Network ◽  
Pore Network Model ◽  
Zone Model ◽  
Drying Process ◽  
Isothermal Drying

In view of the fact that the zone model for porous media drying cannot disclose the mechanism of liquid phase distribution effectively, a pore network model for the slow isothermal drying process of porous media was developed by applying the theories of pore network drying and transport-process, which fused the physical parameters of porous media, such as porosity, pore mean diameter, and pore size distribution into the model parameters, and a sand bed drying experiment was conducted to verify the validity of this model. The experiment and simulation results indicate that the pore network model could explain the slow isothermal drying process of porous media well. The pore size distributions of porous media have a great effect on the liquid phase distribution of the drying process. The dual-zone model is suitable for the porous media whose pore size distribution obeys Gaussian distribution, while the three-zone model is suitable for the porous media whose pore size distribution obeys the lognormal distribution when the drying analysis of porous media is conducted.

scholarly journals Pore Network Simulation of Gas-Liquid Distribution in Porous Transport Layers

Processes ◽  
2019 ◽  
Vol 7 (9) ◽  
pp. 558 ◽  
Author(s):  
Nicole Vorhauer ◽  
Haashir Altaf ◽  
Evangelos Tsotsas ◽  
Tanja Vidakovic-Koch
Keyword(s):  
Porous Media ◽  
Water Supply ◽  
Pore Size Distribution ◽  
Pore Size ◽  
Size Distribution ◽  
Network Models ◽  
Pore Network ◽  
Liquid Films ◽  
Transport Layer ◽  
Liquid Clusters

Pore network models are powerful tools to simulate invasion and transport processes in porous media. They are widely applied in the field of geology and the drying of porous media, and have recently also received attention in fuel cell applications. Here we want to describe and discuss how pore network models can be used as a prescriptive tool for future water electrolysis technologies. In detail, we suggest in a first approach a pore network model of drainage for the prediction of the oxygen and water invasion process inside the anodic porous transport layer at high current densities. We neglect wetting liquid films and show that, in this situation, numerous isolated liquid clusters develop when oxygen invades the pore network. In the simulation with narrow pore size distribution, the volumetric ratio of the liquid transporting clusters connected between the catalyst layer and the water supply channel is only around 3% of the total liquid volume contained inside the pore network at the moment when the water supply route through the pore network is interrupted; whereas around 40% of the volume is occupied by the continuous gas phase. The majority of liquid clusters are disconnected from the water supply routes through the pore network if liquid films along the walls of the porous transport layer are disregarded. Moreover, these clusters hinder the countercurrent oxygen transport. A higher ratio of liquid transporting clusters was obtained for greater pore size distribution. Based on the results of pore network drainage simulations, we sketch a new route for the extraction of transport parameters from Monte Carlo simulations, incorporating pore scale flow computations and Darcy flow.

Sign in / Sign up

Export Citation Format

Share Document