Rates of solvolysis of m-fluorobenzoyl chloride and m-trifluoromthylbenozyl chloride in isopropyl alcohol-benzene solutions. The cosolvent effect

1967 ◽  
Vol 71 (5) ◽  
pp. 1374-1381 ◽  
Author(s):  
Thomas F. Fagley ◽  
George A. Von Bodungen ◽  
James J. Rathmell ◽  
J. Douglas Hutchison
Keyword(s):  
Isopropyl Alcohol ◽  
Alcohol Benzene

TEM study of order, structure and defects of β and martensite in Cu-Al-Mn shape memory alloys

1990 ◽  
Vol 48 (4) ◽  
pp. 188-189
Author(s):  
J.M. Guilemany ◽  
F. Peregrin
Keyword(s):  
Shape Memory ◽  
Orthophosphoric Acid ◽  
Isopropyl Alcohol ◽  
Metastable Phase ◽  
Characteristic Temperature ◽  
Ethanol Solution ◽  
Order Structure ◽  
Thin Foils ◽  
Polycrystalline Alloys ◽  
Diamond Saw

The shape memory effect (SME) shown by Cu-Al-Mn alloys stems from the thermoelastic martensitic transformation occuring between a β (L2,) metastable phase and a martensitic phase. The TEM study of both phases in single and polycrystalline Cu-Al-Mn alloys give us greater knowledge of the structure, order and defects.The alloys were obtained by vacuum melting of Cu, Al and Mn and single crystals were obtained from polycrystalline alloys using a modified Bridgman method. Four different alloys were used with (e/a) ranging from 1.41 to 1.46 . Two different heat treatments were used and the alloys also underwent thermal cycling throughout their characteristic temperature range -Ms, Mf, As, Af-. The specimens were cut using a low speed diamond saw and discs were mechanically thinned to 100 μm and then ion milled to perforation at 4 kV. Some thin foils were also prepared by twin-jet electropolishing, using a (1:10:50:50) urea: isopropyl alcohol: orthophosphoric acid: ethanol solution at 20°C. The foils were examinated on a TEM operated at 200 kV.

Development of reference materials with the composition of propyl and isopropyl alcohol solutions

2020 ◽  
pp. 66-72
Author(s):  
Irina A. Piterskikh ◽  
Svetlana V. Vikhrova ◽  
Nina G. Kovaleva ◽  
Tatyana O. Barynskaya
Keyword(s):  
Reference Materials ◽  
Measurement Errors ◽  
Isopropyl Alcohol ◽  
Certified Reference Materials ◽  
Toxic Substances ◽  
Biological Objects ◽  
Margin Of Error ◽  
Measurement Results ◽  
And Control ◽  
Characteristic Mass

Certified reference materials (CRM) composed of propyl (11383-2019) and isopropyl (11384-2019) alcohols solutions were created for validation of measurement procedures and control of measurement errors of measurement results of mass concentrations of toxic substances (alcohol) in biological objects (urine, blood) and water. Two ways of establishing the value of the certified characteristic – mass consentration of propanol-1 or propanol-2 have been studied. The results obtained by the preparation procedure and comparison with the standard are the same within the margin of error.

Sign in / Sign up

Export Citation Format

Share Document