Propan-2-ol (isopropyl alcohol) for industrial use

1965 ◽  
Keyword(s):  
Isopropyl Alcohol ◽  
Industrial Use

scholarly journals CATALYTIC SYNTHESIS OF A LINE BY ACETYLENE HYDRATION

2020 ◽  
Vol 2 (440) ◽  
pp. 23-30
Author(s):  
N. Fayzullayev ◽  
K. Akmalaiuly ◽  
A. Karjavov
Keyword(s):  
Calcium Phosphate ◽  
Isopropyl Alcohol ◽  
High Selectivity ◽  
Alcohol Oxidation ◽  
Average Yield ◽  
Chemical Product ◽  
Temperature Changes ◽  
Flexible Technology ◽  
Acetic Aldehyde ◽  
Industrial Use

Acetone is a valuable chemical product. It can be obtained by oxidative dehydrogenation of isopropyl alcohol, oxidation of propylene, decomposition of acetic acid and ethyl alcohol, oxidation of cymene and others. Among the known processes for the production of acetone, the most promising is the synthesis by hydration of acetylene in the presence of catalysts. The advantage of this method is the possibility of carrying out the process in existing plants for the production of acetic aldehyde. On the other hand, the process of simultaneously producing acetaldehyde and acetone under the influence of multifunctional catalysts and carrying out the process using flexible technology is promising. The vapor-phase hydration of acetylene with the formation of acetone on polyfunctional catalysts was studied. Process parameters are found that provide acetone with high selectivity and acetylene conversion. At present, acetic aldehyde is mainly obtained by two methods - hydration of acetylene and oxidation of ethylene. The process of hydration of acetylene to acetic aldehyde in the presence of catalysts has been studied quite well. Numerous catalysts have been proposed for this process. Among the known catalysts for hydration of acetylene to acetic aldehyde, the most active was the cadmium calcium phosphate catalyst (CCF), which is recommended for industrial use. However, cadmium calcium phosphate catalyst is not without drawbacks. The average yield of acetaldehyde in one pass of acetylene does not exceed 7.0%. The CCF catalyst is very sensitive to temperature changes, its service life before regeneration does not exceed 72-76 hours. Keywords: acetone, propylene, hydration process, catalyst, crosslinking, multifunctional properties.

Ultrastructure of mesotheliomas

1984 ◽  
Vol 42 ◽  
pp. 98-101
Author(s):  
Irving Dardick
Keyword(s):  
Electron Microscopy ◽  
Latent Period ◽  
Spindle Cell ◽  
Spindle Cell Sarcoma ◽  
Metastatic Adenocarcinoma ◽  
Cell Sarcoma ◽  
Cytological Features ◽  
Industrial Use ◽  
Degree Of Differentiation

With the extensive industrial use of asbestos in this century and the long latent period (20-50 years) between exposure and tumor presentation, the incidence of malignant mesothelioma is now increasing. Thus, surgical pathologists are more frequently faced with the dilemma of differentiating mesothelioma from metastatic adenocarcinoma and spindle-cell sarcoma involving serosal surfaces. Electron microscopy is amodality useful in clarifying this problem.In utilizing ultrastructural features in the diagnosis of mesothelioma, it is essential to appreciate that the classification of this tumor reflects a variety of morphologic forms of differing biologic behavior (Table 1). Furthermore, with the variable histology and degree of differentiation in mesotheliomas it might be expected that the ultrastructure of such tumors also reflects a range of cytological features. Such is the case.

TEM study of order, structure and defects of β and martensite in Cu-Al-Mn shape memory alloys

1990 ◽  
Vol 48 (4) ◽  
pp. 188-189
Author(s):  
J.M. Guilemany ◽  
F. Peregrin
Keyword(s):  
Shape Memory ◽  
Orthophosphoric Acid ◽  
Isopropyl Alcohol ◽  
Metastable Phase ◽  
Characteristic Temperature ◽  
Ethanol Solution ◽  
Order Structure ◽  
Thin Foils ◽  
Polycrystalline Alloys ◽  
Diamond Saw

The shape memory effect (SME) shown by Cu-Al-Mn alloys stems from the thermoelastic martensitic transformation occuring between a β (L2,) metastable phase and a martensitic phase. The TEM study of both phases in single and polycrystalline Cu-Al-Mn alloys give us greater knowledge of the structure, order and defects.The alloys were obtained by vacuum melting of Cu, Al and Mn and single crystals were obtained from polycrystalline alloys using a modified Bridgman method. Four different alloys were used with (e/a) ranging from 1.41 to 1.46 . Two different heat treatments were used and the alloys also underwent thermal cycling throughout their characteristic temperature range -Ms, Mf, As, Af-. The specimens were cut using a low speed diamond saw and discs were mechanically thinned to 100 μm and then ion milled to perforation at 4 kV. Some thin foils were also prepared by twin-jet electropolishing, using a (1:10:50:50) urea: isopropyl alcohol: orthophosphoric acid: ethanol solution at 20°C. The foils were examinated on a TEM operated at 200 kV.

Development of reference materials with the composition of propyl and isopropyl alcohol solutions

2020 ◽  
pp. 66-72
Author(s):  
Irina A. Piterskikh ◽  
Svetlana V. Vikhrova ◽  
Nina G. Kovaleva ◽  
Tatyana O. Barynskaya
Keyword(s):  
Reference Materials ◽  
Measurement Errors ◽  
Isopropyl Alcohol ◽  
Certified Reference Materials ◽  
Toxic Substances ◽  
Biological Objects ◽  
Margin Of Error ◽  
Measurement Results ◽  
And Control ◽  
Characteristic Mass

Certified reference materials (CRM) composed of propyl (11383-2019) and isopropyl (11384-2019) alcohols solutions were created for validation of measurement procedures and control of measurement errors of measurement results of mass concentrations of toxic substances (alcohol) in biological objects (urine, blood) and water. Two ways of establishing the value of the certified characteristic – mass consentration of propanol-1 or propanol-2 have been studied. The results obtained by the preparation procedure and comparison with the standard are the same within the margin of error.

Sign in / Sign up

Export Citation Format

Share Document