Embodied Energy of Construction Materials: Integrating Human and Capital Energy into an IO-Based Hybrid Model

2015 ◽  
Vol 49 (3) ◽  
pp. 1936-1945 ◽  
Author(s):  
Manish K. Dixit ◽  
Charles H. Culp ◽  
Jose L. Fernandez-Solis
Keyword(s):  
Hybrid Model ◽  
Construction Materials ◽  
Embodied Energy

Agriculture—Things That Are Grown

2017 ◽  
Author(s):  
Peter Rez
Keyword(s):  
Crop Yields ◽  
Animal Feed ◽  
Electrical Power ◽  
Construction Materials ◽  
Embodied Energy ◽  
Liquid Fuels ◽  
Energy Output ◽  
Recycled Paper ◽  
Additional Energy ◽  
Energy Inputs

Timber has the lowest embodied energy of any of the construction materials. Paper production from trees requires much more energy. There is some energy saving in recycling, as recycled paper substitutes for pulp derived from wood chips. Growing crops for food also requires energy. The energy required for plants to grow comes from the sun, but there are additional energy inputs from fertiliser and farm machinery to speed up the growth process and vastly improve crop yields. If grains are used as animal feed, then the energy inputs are much larger than the dietary energy output—the larger the animal and the longer it is fattened up before slaughter, the more inefficient the process. The use of crops to make fuel for electrical power generation or for processing into liquid fuels is horribly inefficient. The problem is simple—the plants do not grow fast enough!

scholarly journals Resource harvesting through a systematic deconstruction of the residential house: a case study of the ‘Whole House Reuse’ project in Christchurch, New Zealand

2018 ◽  
Author(s):  
Atiq U. Zaman ◽  
Juliet Arnott ◽  
Kate Mclntyre ◽  
Jonathon Hannon
Keyword(s):  
Emission Reduction ◽  
Greenhouse Gas Emission ◽  
New Products ◽  
Construction Materials ◽  
Resource Conservation ◽  
Local Communities ◽  
Embodied Energy ◽  
Market Condition ◽  
Residential House

This study analyses the case study of a deconstruction project called the ‘Whole House Reuse’ (WHR) which aimed, firstly, to harvest materials from a residential house, secondly, to produce new products using the recovered materials, and thirdly, to organize exhibition for the local public to promote awareness on resource conservation and sustainable deconstruction practices. The study applies characterization of recovered materials through deconstruction. In addition to the material recovery, the study assesses the embodied energy saving and greenhouse gas emission abatement of the deconstruction project. Around twelve tonnes of various construction materials were harvested through a systematic deconstruction approach, most which would otherwise be disposed to landfill in the traditional demolition approach. The study estimates that the recovered materials could potentially save around 502,158MJ of embodied energy and prevent carbon emission of around 27,029kg (CO2e). Deconstruction could eventually contribute to New Zealand’s national emission reduction targets. In addition, the project successfully engages local communities and designers to produce 400 new products using the recovered materials and exhibited to the local people. The study concludes that there is a huge prospect in regard to resource recovery, emission reduction, employment and small business opportunities using deconstruction of the old house. The socio-cultural importance of the WHR project is definitely immense; however, the greater benefits of such projects are often ignored and remain unreported to wider audiences as most of the external and environmental costs have not been considered in the traditional linear economy. It is acknowledged that under a favourable market condition and with appropriate support from local communities and authorities, deconstruction could contribute significantly to resource conservation and environmental protection despite its requirement of labour intensive efforts.

scholarly journals Reduction of Embodied Energy and Construction Cost of Affordable Houses through Efficient Architectural Design: A Case Study in Indian Scenario

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Deepak Bansal ◽  
V. K. Minocha ◽  
Arvinder Kaur ◽  
Vaidehi A. Dakwale ◽  
R. V. Ralegaonkar
Keyword(s):  
Affordable Housing ◽  
Architectural Design ◽  
Construction Materials ◽  
Construction Cost ◽  
Area Ratio ◽  
Embodied Energy ◽  
Important Indicator ◽  
Individual Unit ◽  
Architectural Planning ◽  
Cost Of Construction

Embodied energy and cost of construction of any building depends upon the consumption of resources, more specifically construction materials. In housing clusters, the spaces provided for horizontal and vertical circulation of occupants such as corridors and contribute in the built-up area of individual unit without any increase in the usable/carpet area. Thus, an efficient architectural planning of common circulation spaces plays a major role in lowering the built-up-to-carpet area ratio of individual housing unit in clusters. This may, thus, result in lesser embodied energy and maximum area availability for occupant usage. In the present study, 30 clusters of Indian affordable housing units (IAHUs) of similar typology and different architectural designs are analyzed. The built-up and carpet area of each IAHU are estimated, and the ratio of the built-up to carpet area is calculated. Detailed estimates of construction materials for each IAHU is prepared, and cost of construction and embodied energy is calculated. The calculations of embodied energy and construction cost are done for major construction materials, viz., cement, steel, bricks, sand, and coarse aggregate and compared with different built-up-to-carpet area ratio. The study of IAHUs concludes that a variation of 1.30 to 1.62 in the built-up area-to-carpet area ratio results in variation in construction cost (INR 13,425.00 to 20,138.00 per m2 carpet area) and embodied energy (4–6.5 GJ per m2 carpet area). Analysis suggests that the IAHU with a lower built-up-to-carpet area ratio exhibits reduction in the cost of construction and embodied energy simultaneously. Thus, an efficient architectural design plays a major role in improving the sustainability of IAHUs and built-up-to-carpet area ratio is an important indicator of sustainability.

Cost and environmental impacts reduction through building compactness

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Andrea Parisi Kern ◽  
Renata Postay ◽  
Eduardo Reuter Schneck ◽  
Mauricio Mancio ◽  
Marco Aurélio Stumpf González ◽  
...  
Keyword(s):  
Environmental Impacts ◽  
Construction Materials ◽  
Embodied Energy ◽  
Constructive Method ◽  
Emission Data ◽  
Content Type ◽  
Wide Range ◽  
The Cost ◽  
Research Stage ◽  
Compactness Index

PurposeThe central motivation for this study was to examine alternatives against the apartment area reduction as a safe way to reduce construction costs, adopted by many construction companies. From the building economic compactness index concept, it was studied the cost and environmental impacts (material consumption, embodied energy – EE and CO2 emission).Design/methodology/approachThe research strategy takes advantage of a case study aiming to investigate the relation between design characteristics related to area (m²) and building economic compactness index (%) with cost (Research Stage 1) and with environmental impacts: (Research Stage 2). The study involved real data from social housing projects, chosen in terms in terms of very similar features like size, area and constructive method (constants), however, with dissimilar compactness (variable).FindingsThe lack of direct relation between area and cost signs the importance of including the cost of vertical plans considered in the economic compactness building. The higher the economic compactness index, the lower the cost, the lower the amount of material, EE and CO2 emission parameters. However, due to the wide range of EE and CO2 values available, the reduction in the amount of materials achieved by increasing building economic compactness index may not be reflected in EE and CO2 gains.Research limitations/implicationsAs the limitation of this study, it must be taken into account a limited number of case buildings and the fact that the analysis is dependent on the reliability and accuracy of the data provided by constructors and the available information of EE and CO2 emission. As well discussed in the literature, the consistent database is a great challenge for the construction sector.Originality/valueThere might be alternatives to higher areas with relatively low-cost increments since results from buildings with the same area present different cost estimative and suggest a strong relationship with the economic compactness index. The large variation of EE and CO2 emission data indicates that reductions obtained by compactness increase may be impaired if the construction materials are produced with high levels of EE and CO2 emission. Thus, there must be an integrated effort on the part of designers (design and material specification) and manufacturers (material production), since isolated solutions may not be enough.

scholarly journals Embodied Energy and CO2 Emissions of Widely Used Building Materials: The Ethiopian Context

Buildings ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 136 ◽  
Author(s):  
Woubishet Zewdu Taffese ◽  
Kassahun Admassu Abegaz
Keyword(s):  
Co2 Emissions ◽  
Building Materials ◽  
Construction Materials ◽  
Developed Countries ◽  
Embodied Energy ◽  
Policy Makers ◽  
Coarse Aggregates ◽  
Human Habitat ◽  
Wide Range ◽  
Concrete Blocks

Buildings use a wide range of construction materials, and the manufacturing of each material consumes energy and emits CO2. Several studies have already been conducted to evaluate the embodied energy and the related CO2 emissions of building materials, which are mainly based on case studies from developed countries. There is a considerable gap in cases of developing countries regarding assessment of embodied energy and CO2 emissions of these building materials. This study identified the top five most used construction materials (cement, sand, coarse aggregates, hollow concrete blocks, and reinforcement bars), which are also prime sources of waste generation during construction in the Ethiopian building construction sector. Then, what followed was the evaluation of the embodied energies and CO2 emissions of these materials by examining five commercial and public buildings within the cradle-to-site lifecycle boundary. The evaluation results demonstrated that cement, hollow concrete blocks (HCB), and reinforcement bars (rebars) are the major consumers of energy and major CO2 emitters. Cumulatively, they were responsible for 94% of the embodied energy and 98% of the CO2 emissions. The waste part of the construction materials has inflated the embodied energy and the subsequent CO2 emissions considerably. The study also recommended several strategies for the reduction of embodied energy and the related CO2 emissions. The research delivers critical insights into embodied energy and CO2 emissions of the five most used building materials in the Ethiopian construction industry, as there are no prior studies on this theme. This might be a cause to arouse awareness and interest among the policy makers and the wider public to clearly understand the importance of research on this crucial issue to develop national energy and CO2 descriptors for construction materials, in order to take care of our naturally endowed, but yet fragile, human habitat.

scholarly journals Assessment of moisture and mould of hempcrete and straw panels

2021 ◽  
Vol 2069 (1) ◽  
pp. 012194
Author(s):  
Jane Raamets ◽  
Laura Lokko ◽  
Aime Ruus ◽  
Targo Kalamees ◽  
Karin Muoni
Keyword(s):  
Greenhouse Gas ◽  
Wheat Straw ◽  
Construction Materials ◽  
Embodied Energy ◽  
Insulation Material ◽  
Biological Degradation ◽  
Recycled Paper ◽  
Sustainable Solutions ◽  
Critical Moisture ◽  
Structural Engineers

Abstract At present buildings contribute a third of total greenhouse gas emissions. There is a need for sustainable solutions and natural materials, which offer low-embodied energy and their low impact has a promising potential as construction alternatives. Hempcrete is a lightweight insulation material, which provides natural, airtight, and vapor-permeable insulation. Straw panels are also natural construction materials and they consist of extruded wheat straw and are surrounded with recycled paper on all sides. There are some risks, which can be associated with the use of such materials - infestation, biological degradation, presence of moisture, and structural degradation. The aim of the study is to determine the critical moisture level and mould resistance of hempcrete and straw panels. The results of this study are valuable to both scientists and structural engineers.

scholarly journals Genetic Algorithm for Embodied Energy Optimisation of Steel-Concrete Composite Beams

2020 ◽  
Vol 12 (8) ◽  
pp. 3102 ◽  
Author(s):  
Alex H. Whitworth ◽  
Konstantinos Daniel Tsavdaridis
Keyword(s):  
Genetic Algorithm ◽  
Parametric Design ◽  
Construction Materials ◽  
Tall Buildings ◽  
Composite Beams ◽  
Embodied Energy ◽  
Objective Functions ◽  
Composite Frames ◽  
Energy Optimisation ◽  
The Relationship

The optimisation of structural performance is acknowledged as a means of obtaining sustainable structural designs. A minimisation of embodied energy of construction materials is a key component in the delivery of sustainable future designs. This study attempts to understand the relationship between embodied energy and structural form of composite floor plates for tall buildings, and how this form can be optimised to minimise embodied energy. As a search method based upon the principles of genetics and natural selection, genetic algorithms (GA) have previously been used as novel means of optimising composite beams and composite frames for cost and weight objective functions. Parametric design models have also been presented as optimisation tools to optimise steel floor plates for both cost and embodied carbon. In this study, a Matlab algorithm is presented incorporating MathWorks global optimisation toolbox GA and utilising Eurocode 4 design processes to optimise a composite beam for five separate objective functions: maximise span length; minimise beam cross-section; minimise slab depth; minimise weight; minimise deflected shape for each of the objective functions. Candidate designs are to be assessed for embodied energy to determine individual relationships. This study shows that it is possible to reduce the embodied energy of steel–concrete composite beams by genetic algorithm optimisation whilst remaining compliant to given design codes.

Zero Energy Houses and Embodied Energy: Regulatory and Design Considerations

2008 ◽  
Author(s):  
Patxi Hernandez ◽  
Paul Kenny
Keyword(s):  
Life Cycle ◽  
Energy Demand ◽  
Energy Use ◽  
Construction Materials ◽  
Energy Performance ◽  
Embodied Energy ◽  
Base Case ◽  
Life Cycle Approach ◽  
Zero Energy ◽  
Zero Energy Buildings

Building energy performance regulations and standards around the world are evolving aiming to reduce the energy use in buildings. As we move towards zero energy buildings, the embodied energy of construction materials and energy systems becomes more important, as it represents a high percentage of the overall life cycle energy use of a building. However, this issue is still ignored by many regulations and certification methods, as happens with the European Energy Performance of Buildings Directive (EPBD), which focuses on the energy used in operation. This paper analyses a typical house designed to comply with Irish building regulations, calculating its energy use for heating and how water with the Irish national calculation tool, which uses a methodology in line with the EPBD. A range of measures to reduce the energy performance in use of this typical house are proposed, calculating the reduced energy demand and moving towards a zero energy demand building. A life-cycle approach is added to the analysis, taking into account the differential embodied energy of the implemented measures in relation to the typical house base-case, annualizing the differential embodied energy and re-calculating the overall energy use. The paper discusses how a simplified approach for accounting embodied energy of materials could be useful in a goal to achieve the lowest life-cycle energy use in buildings, and concludes with a note on how accounting for embodied energy is a key element when moving towards zero energy buildings.

Sign in / Sign up

Export Citation Format

Share Document