Tertiary Recycling of Polyethylene to Hydrocarbon Fuel by Catalytic Cracking over Aluminum Pillared Clays

2002 ◽  
Vol 16 (2) ◽  
pp. 485-489 ◽  
Author(s):  
George Manos ◽  
Isman Y. Yusof ◽  
Nicolas H. Gangas ◽  
Nikos Papayannakos
2018 ◽  
Vol 2 (5) ◽  
pp. 1057-1068 ◽  
Author(s):  
Man Vir Singh ◽  
Sudesh Kumar ◽  
Moinuddin Sarker

Waste high-density poly(ethylene) (HD-PE) plastic deformation into liquid hydrocarbon fuel using a pyrolysis-catalytic cracking process with a copper carbonate (CuCO3) catalyst, at a temperature range from 23 °C to 390 °C.


2018 ◽  
Vol 51 (9) ◽  
pp. 778-785 ◽  
Author(s):  
Iori Shimada ◽  
Yoshitaka Nakamura ◽  
Haruhisa Ohta ◽  
Kengo Suzuki ◽  
Toru Takatsuka

2018 ◽  
Vol 112 ◽  
pp. 138-143 ◽  
Author(s):  
Iori Shimada ◽  
Yoshitaka Nakamura ◽  
Shin Kato ◽  
Ryohei Mori ◽  
Haruhisa Ohta ◽  
...  

Author(s):  
Nadia Mrad ◽  
Maria Paraschiv ◽  
Fethi Aloui ◽  
Mohand Tazerout ◽  
Sassi Ben Nasrallah

Liquid fuels can be produced from triglyceride sources via thermo-catalytic process. In the present work, the production of bio-fuel by catalytic cracking of waste fish fat in a continuous reactor at atmospheric pressure has been studied. Different catalysts were used and maximum bio-oil yield of 66% with the lowest acidity of 4.3 mgKOH/goil was obtained with a controlled reaction temperature of 500°C and Na2CO3 as a catalyst. After chemical treatment of this bio-oil, the acidity decreases to 1.5mgKOH/goil. These bio-fuels were characterized according to their physico-chemical properties, and compared with the diesel fuel. The results show that the catalytic cracking process represents an alternative method to produce bio-fuels with physico-chemical characteristics similar to petroleum fuels from fish oil industrial residues.


2017 ◽  
Vol 8 (1) ◽  
pp. 1193-1202
Author(s):  
Jean Baptiste Habyarimana ◽  
Mohammed Njiemon ◽  
Raiyan Abdulnasir ◽  
Musa Neksumi ◽  
Muhammad Yahaya ◽  
...  

2020 ◽  
Vol 63 (1) ◽  
pp. 10-19
Author(s):  
Iori SHIMADA ◽  
Takuya MATSUMOTO ◽  
Haruhisa OHTA ◽  
Toru TAKATSUKA

2018 ◽  
Vol 61 (5) ◽  
pp. 302-310 ◽  
Author(s):  
Iori Shimada ◽  
Yutaka Kobayashi ◽  
Haruhisa Ohta ◽  
Kengo Suzuki ◽  
Toru Takatsuka

2021 ◽  
Vol 14 (01) ◽  
pp. 647-652
Author(s):  
Minto Supeno ◽  
Agung Pratama ◽  
FriskilaRumianta Kembaren

Sign in / Sign up

Export Citation Format

Share Document