Large Field-of-View Super-Resolution Optical Microscopy Based on Planar Polymer Waveguides

ACS Photonics ◽  
2021 ◽  
Author(s):  
Anders Kokkvoll Engdahl ◽  
Stefan Belle ◽  
Tung-Cheng Wang ◽  
Ralf Hellmann ◽  
Thomas Huser ◽  
...  
2018 ◽  
Vol 1074 ◽  
pp. 012172
Author(s):  
Shilin Gao ◽  
Kai Meng ◽  
Zhan Yang ◽  
Huicong Liu ◽  
Tao Chen ◽  
...  

2017 ◽  
Vol 25 (12) ◽  
pp. 13382 ◽  
Author(s):  
Zeyu Zhao ◽  
Bo Xin ◽  
Luchang Li ◽  
Zhen-Li Huang

2020 ◽  
Vol 40 (13) ◽  
pp. 1322002
Author(s):  
王超 Wang Chao ◽  
史浩东 Shi Haodong ◽  
李英超 Li Yingchao ◽  
付强 Fu Qiang ◽  
刘壮 Liu Zhuang

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Anna Archetti ◽  
Evgenii Glushkov ◽  
Christian Sieben ◽  
Anton Stroganov ◽  
Aleksandra Radenovic ◽  
...  

2021 ◽  
Vol 28 (3) ◽  
Author(s):  
Talgat Mamyrbayev ◽  
Katsumasa Ikematsu ◽  
Hidekazu Takano ◽  
Yanlin Wu ◽  
Kenji Kimura ◽  
...  

Owing to the development of X-ray focusing optics during the past decades, synchrotron-based X-ray microscopy techniques allow the study of specimens with unprecedented spatial resolution, down to 10 nm, using soft and medium X-ray photon energies, though at the expense of the field of view (FOV). One of the approaches to increase the FOV to square millimetres is raster-scanning of the specimen using a single nanoprobe; however, this results in a long data acquisition time. This work employs an array of inclined biconcave parabolic refractive multi-lenses (RMLs), fabricated by deep X-ray lithography and electroplating to generate a large number of long X-ray foci. Since the FOV is limited by the pattern height if a single RML is used by impinging X-rays parallel to the substrate, many RMLs at regular intervals in the orthogonal direction were fabricated by tilted exposure. By inclining the substrate correspondingly to the tilted exposure, 378000 X-ray line foci were generated with a length in the centimetre range and constant intervals in the sub-micrometre range. The capability of this new X-ray focusing device was first confirmed using ray-tracing simulations and then using synchrotron radiation at BL20B2 of SPring-8, Japan. Taking account of the fact that the refractive lens is effective for focusing high-energy X-rays, the experiment was performed with 35 keV X-rays. Next, by scanning a specimen through the line foci, this device was used to perform large FOV pixel super-resolution scanning transmission hard X-ray microscopy (PSR-STHXM) with a 780 ± 40 nm spatial resolution within an FOV of 1.64 cm × 1.64 cm (limited by the detector area) and a total scanning time of 4 min. Biomedical implant abutments fabricated via selective laser melting using Ti–6Al–4V medical alloy were measured by PSR-STHXM, suggesting its unique potential for studying extended and thick specimens. Although the super-resolution function was realized in one dimension in this study, it can be expanded to two dimensions by aligning a pair of presented devices orthogonally.


Sign in / Sign up

Export Citation Format

Share Document