scholarly journals Novel Nitrogen–Phosphorus Flame Retardant Based on Phosphonamidate: Thermal Stability and Flame Retardancy

ACS Omega ◽  
2019 ◽  
Vol 4 (18) ◽  
pp. 17791-17797 ◽  
Author(s):  
Hai Vothi ◽  
Congtranh Nguyen ◽  
Lam H. Pham ◽  
DongQuy Hoang ◽  
Jinhwan Kim
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Nitrogen Phosphorus

Preparation, characterization and testing of flame retardant cotton cellulose material: flame retardancy, thermal stability and flame-retardant mechanism

Cellulose ◽  
2021 ◽  
Vol 28 (6) ◽  
pp. 3789-3805
Author(s):  
Ling Sun ◽  
Huixin Wang ◽  
Wennan Li ◽  
Jiaojiao Zhang ◽  
Zheng Zhang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Cotton Cellulose ◽  
Cellulose Material

scholarly journals Investigation of the Structure-Property Effect of Phosphorus-Containing Polysulfone on Decomposition and Flame Retardant Epoxy Resin Composites

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 380 ◽  
Author(s):  
Wei Zhao ◽  
Yongxiang Li ◽  
Qiushi Li ◽  
Yiliang Wang ◽  
Gong Wang
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Phosphorus Content ◽  
Structure Property ◽  
Scanning Calorimetry ◽  
Inhibition Effect ◽  
Phosphorus Containing ◽  
High Degree ◽  
Thermal Stability Of

The flame retardant modification of epoxy (EP) is of great signification for aerospace, automotive, marine, and energy industries. In this study, a series of EP composites containing different variations of phosphorus-containing polysulfone (with a phosphorus content of approximately 1.25 wt %) were obtained. The obtained EP/polysulfone composites had a high glass transition temperature (Tg) and high flame retardancy. The influence of phosphorus-containing compounds (ArPN2, ArPO2, ArOPN2 and ArOPO2) on the thermal properties and flame retardancy of EP/polysulfone composites was investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), a UL-94 vertical burning test, and cone calorimeter tests. The phosphorus-containing polysulfone enhanced the thermal stability of EP. The more stable porous char layer, less flammable gases, and a lower apparent activation energy at a high degree of conversion demonstrated the high gas inhibition effect of phosphorus-containing compounds. Moreover, the gas inhibition effect of polysulfone with a P–C bond was more efficient than the polysulfone with a P–O–C bond. The potential for optimizing flame retardancy while maintaining a high Tg is highlighted in this study. The flame-retardant EP/polysulfone composites with high thermal stability broaden the application field of epoxy.

scholarly journals Synthesis of a Novel Phosphorous-Nitrogen Based Charring Agent and Its Application in Flame-retardant HDPE/IFR Composites

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1062 ◽  
Author(s):  
Junlei Chen ◽  
Jihui Wang ◽  
Aiqing Ni ◽  
Hongda Chen ◽  
Penglong Shen
Keyword(s):  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Fire Hazard ◽  
Weight Ratio ◽  
Charring Agent ◽  
Migration Percentage ◽  
Ul 94 ◽  
Thermal Stability Of

In this work, a novel phosphorous–nitrogen based charring agent named poly(1,3-diaminopropane-1,3,5-triazine-o-bicyclic pentaerythritol phosphate) (PDTBP) was synthesized and used to improve the flame retardancy of high-density polyethylene (HDPE) together with ammonium polyphosphate (APP). The results of Fourier transform infrared spectroscopy (FTIR) and 13C solid-state nuclear magnetic resonance (NMR) showed that PDTBP was successfully synthesized. Compared with the traditional intumescent flame retardant (IFR) system contained APP and pentaerythritol (PER), the novel IFR system (APP/PDTBP, weight ratio of 2:1) could significantly promote the flame retardancy, water resistance, and thermal stability of HDPE. The HDPE/APP/PDTBP composites (PE3) could achieve a UL-94 V-0 rating with LOI value of 30.8%, and had a lower migration percentage (2.2%). However, the HDPE/APP/PER composites (PE5) had the highest migration percentage (4.7%), lower LOI value of 23.9%, and could only achieve a UL-94 V-1 rating. Besides, the peak of heat release rate (PHRR), total heat release (THR), and fire hazard value of PE3 were markedly decreased compared to PE5. PE3 had higher tensile strength and flexural strength of 16.27 ± 0.42 MPa and 32.03 ± 0.59 MPa, respectively. Furthermore, the possible flame-retardant mechanism of the APP/PDTBP IFR system indicated that compact and continuous intumescent char layer would be formed during burning, thus inhibiting the degradation of substrate material and improving the thermal stability of HDPE.

scholarly journals Highly Efficient Composite Flame Retardants for Improving the Flame Retardancy, Thermal Stability, Smoke Suppression, and Mechanical Properties of EVA

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1251
Author(s):  
Yilin Liu ◽  
Bin Li ◽  
Miaojun Xu ◽  
Lili Wang
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Heat Release ◽  
Flame Retardant ◽  
Production Rate ◽  
Flame Retardancy ◽  
Flame Retardants ◽  
Mass Loss Rate ◽  
Smoke Suppression ◽  
Average Mass

Ethylene vinyl acetate (EVA) copolymer has been used extensively in many fields. However, EVA is flammable and releases CO gas during burning. In this work, a composite flame retardant with ammonium polyphosphate (APP), a charring–foaming agent (CFA), and a layered double hydroxide (LDH) containing rare-earth elements (REEs) was obtained and used to improve the flame retardancy, thermal stability, and smoke suppression for an EVA matrix. The thermal analysis showed that the maximum thermal degradation temperature of all composites increased by more than 37 °C compared with that of pure EVA. S-LaMgAl/APP/CFA/EVA, S-CeMgAl/APP/CFA/EVA, and S-NdMgAl/APP/CFA/EVA could achieve self-extinguishing behavior according to the UL-94 tests (V-0 rating). The peak heat release rate (pk-HRR) indicated that all LDHs containing REEs obviously reduced the fire strength in comparison with S-MgAl. In particular, pk-HRR of S-LaMgAl/APP/CFA/EVA, S-CeMgAl/APP/CFA/EVA and S-NdMgAl/APP/CFA/EVA were all decreased by more than 82% in comparison with pure EVA. Furthermore, the total heat release (THR), smoke production rate (SPR), and production rate of CO (COP) also decreased significantly. The average mass loss rate (AMLR) confirmed that the flame retardant exerted an effect in the condensed phase of the composites. Meanwhile, the combination of APP, CFA, and LDH containing REEs allowed the EVA matrix to maintain good mechanical properties.

Influence of silicon dioxide addition and processing methods on structure, thermal stability and flame retardancy of EVA/NR blend nanocomposite foams

2020 ◽  
pp. 147776062095343
Author(s):  
Alif Walong ◽  
Bencha Thongnuanchan ◽  
Tadamoto Sakai ◽  
Natinee Lopattananon
Keyword(s):  
Thermal Stability ◽  
Silicon Dioxide ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Layered Silicate ◽  
Melt Mixing ◽  
Limiting Oxygen Index ◽  
Char Layer ◽  
Nanocomposite Foams ◽  
Silicon Based

Rubber nanocomposite foams based on 60/40 ethylene vinyl acetate (EVA)/natural rubber (NR) were melt-mixed with flame retardant silicon dioxide (SiO2) (20 parts per hundred rubber, phr), and foamed by compression molding process. In this study, the effect of mixing phenomena of SiO2 through two different compounding techniques such as direct mixing (DM) and phase selective mixing (PSM) methods on structure, thermal stability, combustility and flame retardancy of EVA/NR blend nanocomposite foams were investigated. DM method is a melt mixing of EVA, NR, layered silicate and SiO2, followed by foaming. PSM is a new method based on pre-mixing EVA with SiO2, then melt mixing of EVA/SiO2 masterbatch with NR and layered silicate, and finally foaming. Based on TEM technique, it was found that the SiO2 was exclusively located in dispersed NR phase for the sample prepared by DM method, and the SiO2 was preferably dispersed in continuous EVA matrix when PSM method was employed. However, the different mixing methods did not significantly alter their cellular structures. The thermal stability and char residue content of foamed samples with SiO2 increased obviously when compared with those of corresponding foams without SiO2. The results based on limiting oxygen index (LOI) test and oxygen bomb calorimetry indicated that the foams combined with SiO2 had better combustion resistance and flame retardancy due to barrier effect of thermally stable silicon-based char layer. Further, the SiO2 filled foamed system obtained from the PSM method showed a higher degree of improvement in thermal stability, combustion resistance and flame retardancy than that of DM method because the homogeneous dispersion of SiO2 in EVA matrix rather than the selective dispersion in NR phase. This resulted in the continuity of flame retardant EVA/SiO2 phase in the 60/40 EVA/NR nanocomposite foams, which exerted more efficient fire barrier of the silicon-based char layer.

scholarly journals Solid Wastes Toward Flame Retardants for Polymeric Materials: A Review

2021 ◽  
Vol 8 ◽  
Author(s):  
Chuanhua Gao ◽  
Siqi Huo ◽  
Zhenhu Cao
Keyword(s):  
Thermal Stability ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Mass Production ◽  
Flame Retardants ◽  
Polymeric Materials ◽  
Solid Wastes ◽  
Smoke Suppression ◽  
Future Perspectives ◽  
Recycle And Reuse

It has been significant yet challenging to recycle and reuse different kinds of wastes because of their mass production within society. Many efforts have been conducted to reuse wastes in different fields. Interestingly, some wastes have been employed to replace traditional petroleum-based flame retardants for polymeric materials. This review focuses on the recent development of waste flame retardants and their impacts on thermal stability, flame retardancy, and smoke suppression of polymers, followed by representative flame-retardant mechanisms. Finally, the key challenges associated with waste flame retardants are presented, and some future perspectives are proposed.

Preparation of lignin–silica hybrids and its application in intumescent flame-retardant poly(lactic acid) system

2012 ◽  
Vol 24 (8) ◽  
pp. 738-746 ◽  
Author(s):  
Rui Zhang ◽  
Xifu Xiao ◽  
Qilong Tai ◽  
Hua Huang ◽  
Jian Yang ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Flame Retardant ◽  
Flame Retardancy ◽  
Photoelectron Spectroscopy ◽  
Intumescent Flame Retardant ◽  
Poly Lactic Acid ◽  
Limiting Oxygen Index ◽  
Silica Hybrids ◽  
Thermal Stability Of

Lignin–silica hybrids (LSHs) were prepared by sol–gel method and characterized by Fourier transform infrared (FT-IR) spectra, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). LSH and ammonium polyphosphate (APP) were added into poly(lactic acid) (PLA) as a novel intumescent flame-retardant (IFR) system to improve the flame retardancy of PLA. The flame-retardant effect of APP and LSH in PLA was studied using limiting oxygen index (LOI), vertical burning (UL-94) tests and cone calorimeter. The thermal stability of PLA/APP/LSH composites was evaluated by thermogravimetric analysis (TGA). Additionally, the morphology and components of char residues of the IFR-PLA composites were investigated by SEM and XPS. With the addition of APP/LSH to PLA system, the morphology of the char residue has obviously changed. Compared with PLA/APP and PLA/APP/lignin, a continuous and dense intumescent charring layer with more phosphor in PLA composites is formed, which exhibits better flame retardancy. All the results show that the combination of APP and LSH can improve the flame-retardant property and increase the thermal stability of PLA composites greatly.

Sign in / Sign up

Export Citation Format

Share Document