scholarly journals Correction to “Impact of Doping on GO: Fast Response–Recovery Humidity Sensor”

ACS Omega ◽  
2018 ◽  
Vol 3 (3) ◽  
pp. 3164-3164
Author(s):  
Keerti Rathi ◽  
Kaushik Pal
Keyword(s):  
Humidity Sensor ◽  
Fast Response ◽  
Response Recovery

scholarly journals Impact of Doping on GO: Fast Response–Recovery Humidity Sensor

ACS Omega ◽  
2017 ◽  
Vol 2 (3) ◽  
pp. 842-851 ◽  
Author(s):  
Keerti Rathi ◽  
Kaushik Pal
Keyword(s):  
Humidity Sensor ◽  
Fast Response ◽  
Response Recovery

scholarly journals Humidity Sensors with Shielding Electrode Under Interdigitated Electrode

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 659 ◽  
Author(s):  
Hong Liu ◽  
Qi Wang ◽  
Wenjie Sheng ◽  
Xubo Wang ◽  
Kaidi Zhang ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Capacitive Sensors ◽  
Humidity Sensors ◽  
Interdigitated Electrode ◽  
Response Recovery ◽  
Chip Fabrication ◽  
Good Agreement ◽  
Capacitive Humidity Sensor

Recently, humidity sensors have been investigated extensively due to their broad applications in chip fabrication, health care, agriculture, amongst others. We propose a capacitive humidity sensor with a shielding electrode under the interdigitated electrode (SIDE) based on polyimide (PI). Thanks to the shielding electrode, this humidity sensor combines the high sensitivity of parallel plate capacitive sensors and the fast response of interdigitated electrode capacitive sensors. We use COMSOL Multiphysics to design and optimize the SIDE structure. The experimental data show very good agreement with the simulation. The sensitivity of the SIDE sensor is 0.0063% ± 0.0002% RH. Its response/recovery time is 20 s/22 s. The maximum capacitance drift under different relative humidity is 1.28% RH.

scholarly journals Nonporous Inorganic Nanoparticle-Based Humidity Sensor: Evaluation of Humidity Hysteresis and Response Time

Sensors ◽  
2020 ◽  
Vol 20 (14) ◽  
pp. 3858
Author(s):  
Shinya Kano ◽  
Harutaka Mekaru
Keyword(s):  
Response Time ◽  
Humidity Sensor ◽  
Silica Nanoparticle ◽  
Fast Response ◽  
Inorganic Nanoparticles ◽  
Humidity Sensors ◽  
Inorganic Nanoparticle ◽  
Response Recovery ◽  
Recovery Times ◽  
Nanoparticle Film

Fast-response humidity sensors using nanomaterials are attractive and have been intensively studied. Among the various nanomaterials, nonporous inorganic nanoparticles are suitable for use in humidity sensitive films for sensors. Here, we focus on a nonporous inorganic nanoparticle film and investigate a humidity sensor using the film. Hysteresis error and a dynamic response to a change of humidity are fundamental specifications of humidity sensors. A humidity sensor using a 50 nm silica nanoparticle film shows a hysteresis error of 2% at 85% RH and a response/recovery time of 2.8/2.3 s in 30% RH to 70% RH. We also summarize response/recovery times and hysteresis errors of state-of-the-art humidity sensors. As compared to those of commercial sensors and porous nanoparticle-based sensors evaluated using saturated salt solutions, the fabricated sensor shows a comparative hysteresis error and shorter response time.

Highly responsive and stable Y3+ doped NiMg–ferrite thick films as an efficient humidity sensor

2016 ◽  
Vol 40 (2) ◽  
pp. 1720-1728 ◽  
Author(s):  
Pratibha Rao ◽  
Rajeev C. Chikate ◽  
Sunita Bhagwat
Keyword(s):  
Thick Film ◽  
Recovery Time ◽  
Humidity Sensor ◽  
Thick Films ◽  
Fast Response ◽  
Response Recovery ◽  
Hysteresis Characteristics ◽  
Screen Printed

Fast response–recovery time with less hysteresis characteristics exhibited by a screen printed Ni0.7Mg0.3Y0.1Fe1.9O4 thick film humidity sensor.

scholarly journals Tin Disulfide-Coated Microfiber for Humidity Sensing with Fast Response and High Sensitivity

Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 648
Author(s):  
Aijie Liang ◽  
Jingyuan Ming ◽  
Wenguo Zhu ◽  
Heyuan Guan ◽  
Xinyang Han ◽  
...  
Keyword(s):  
Humidity Sensor ◽  
Small Diameter ◽  
High Sensitivity ◽  
Large Change ◽  
Small Variation ◽  
Response Speed ◽  
Fast Response ◽  
Tin Disulfide ◽  
Recovery Times ◽  
Response And Recovery

Breath monitoring is significant in assessing human body conditions, such as cardiac and pulmonary symptoms. Optical fiber-based sensors have attracted much attention since they are immune to electromagnetic radiation, thus are safe for patients. Here, a microfiber (MF) humidity sensor is fabricated by coating tin disulfide (SnS2) nanosheets onto the surface of MF. The small diameter (~8 μm) and the long length (~5 mm) of the MF promise strong interaction between guiding light and SnS2. Thus, a small variation in the relative humidity (RH) will lead to a large change in optical transmitted power. A high RH sensitivity of 0.57 dB/%RH is therefore achieved. The response and recovery times are estimated to be 0.08 and 0.28 s, respectively. The high sensitivity and fast response speed enable our SnS2-MF sensor to monitor human breath in real time.

scholarly journals A Full-Range Flexible and Printed Humidity Sensor Based on a Solution-Processed P(VDF-TrFE)/Graphene-Flower Composite

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1915
Author(s):  
Shenawar Ali Khan ◽  
Muhammad Saqib ◽  
Muhammad Muqeet Rehman ◽  
Hafiz Mohammad Mutee Ur Rehman ◽  
Sheik Abdur Rahman ◽  
...  
Keyword(s):  
Active Layer ◽  
Humidity Sensor ◽  
High Reliability ◽  
Full Range ◽  
High Sensitivity ◽  
Fast Response ◽  
Considerable Change ◽  
Relative Humidity Range ◽  
Response And Recovery ◽  
Proportional Relationship

A novel composite based on a polymer (P(VDF-TrFE)) and a two-dimensional material (graphene flower) was proposed as the active layer of an interdigitated electrode (IDEs) based humidity sensor. Silver (Ag) IDEs were screen printed on a flexible polyethylene terephthalate (PET) substrate followed by spin coating the active layer of P(VDF-TrFE)/graphene flower on its surface. It was observed that this sensor responds to a wide relative humidity range (RH%) of 8–98% with a fast response and recovery time of 0.8 s and 2.5 s for the capacitance, respectively. The fabricated sensor displayed an inversely proportional response between capacitance and RH%, while a directly proportional relationship was observed between its impedance and RH%. P(VDF-TrFE)/graphene flower-based flexible humidity sensor exhibited high sensitivity with an average change of capacitance as 0.0558 pF/RH%. Stability of obtained results was monitored for two weeks without any considerable change in the original values, signifying its high reliability. Various chemical, morphological, and electrical characterizations were performed to comprehensively study the humidity-sensing behavior of this advanced composite. The fabricated sensor was successfully used for the applications of health monitoring and measuring the water content in the environment.

Gold functionalized ZnO nanowires as a fast response/recovery ammonia sensor

2018 ◽  
Vol 449 ◽  
pp. 244-249 ◽  
Author(s):  
Nancy Anna Anasthasiya A. ◽  
Roopa Kishore Kampara ◽  
Rai P.K. ◽  
Jeyaprakash B.G.
Keyword(s):  
Fast Response ◽  
Zno Nanowires ◽  
Ammonia Sensor ◽  
Response Recovery

scholarly journals Hydrogen gas sensor based on mesoporous In2O3 with fast response/recovery and ppb level detection limit

2018 ◽  
Vol 43 (50) ◽  
pp. 22746-22755 ◽  
Author(s):  
Zhijie Li ◽  
Shengnan Yan ◽  
Zhonglin Wu ◽  
Hao Li ◽  
Junqiang Wang ◽  
...  
Keyword(s):  
Detection Limit ◽  
Gas Sensor ◽  
Fast Response ◽  
Hydrogen Gas ◽  
Response Recovery

High-performance humidity sensors from Ni(SO4)0.3(OH)1.4 nanobelts

Nanoscale ◽  
2014 ◽  
Vol 6 (12) ◽  
pp. 6521-6525 ◽  
Author(s):  
Ming Zhuo ◽  
Yuejiao Chen ◽  
Tao Fu ◽  
Haonan Zhang ◽  
Zhi Xu ◽  
...  
Keyword(s):  
High Performance ◽  
Humidity Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Humidity Sensors ◽  
Term Stability ◽  
Long Term Stability

Ni(SO4)0.3(OH)1.4 nanobelts are utilized in a humidity sensor by a facile method. The nanobelt based sensor shows a high sensitivity, fast response and long-term stability in the sensing process.

A highly selective and fast-response photoluminescence humidity sensor based on F− decorated NH2-MIL-53(Al) nanorods

2017 ◽  
Vol 5 (36) ◽  
pp. 9465-9471 ◽  
Author(s):  
Ting Lu ◽  
Hongjie Song ◽  
Xiaoqun Dong ◽  
Jianyu Hu ◽  
Yi Lv
Keyword(s):  
Humidity Sensor ◽  
Fast Response

NH2-MIL-53(Al) nanorods studded with F− were successfully synthesized via coordination modulation with HF as a modulator.

Sign in / Sign up

Export Citation Format

Share Document