scholarly journals Understanding the Uptake Mechanism and Interaction Potential of the Designed Peptide and Preparation of Composite Fiber Matrix for Fungal Keratitis

ACS Omega ◽  
2020 ◽  
Vol 5 (21) ◽  
pp. 12090-12102
Author(s):  
Amit Chatterjee ◽  
Hemavathy Nagarajan ◽  
Prema Padmanabhan ◽  
Umashankar Vetrivel ◽  
Kulandhai Lily Therese ◽  
...  
1994 ◽  
Vol 370 ◽  
Author(s):  
Gebran N. Karam

AbstractThe area and properties of the fiber-matrix interface in fiber reinforced cements and concretes determines the amount of stress transferred forth and back between the cement paste and the reinforcement and hence controls the mechanical properties of the composite. Fiber-fiber interaction and overlap of fibers with fibers, voids and aggregates can dramatically decrease the efficiency of the reinforcement by reducing this interfacial area. A simple model to account for this reduction is proposed and ways to integrate it in the models describing the mechanical properties of short fiber reinforced concretes are presented. The parameters of the model are evaluated from previously published data sets and its predictions are found to compare well with experimental observations; for example, it is able to predict the non-linear variation of bending and tensile strength with increasing fiber volume fraction as well as the existence of an optimal fiber content.


2012 ◽  
Vol 498 ◽  
pp. 210-218 ◽  
Author(s):  
Bouchra Hassoune-Rhabbour ◽  
Laurence Poussines ◽  
Valérie Nassiet

There are several models on the relationship structures and properties of the composite fiber / matrix interface [1]. Including literature proposes the development of micromechanical tests suitable for assessing the shear strength of the interface fiber / polymer matrix. The first test which allowed to characterize the fiber / matrix interface is the pull-out test developed by Broutman [2]. It consists in extracting the fiber from the matrix that can be in block form, gout or disk of resin. To reduce the variation in results due to the geometries used, it was agreed to use a drop of resin with small dimensions. The test is to characterize the fiber / matrix interface of natural thermosetting or thermoplastic by determining the shear stress.


2020 ◽  
Vol 5 (14) ◽  
pp. 4364-4370
Author(s):  
Nidhi Gupta ◽  
Himansh Goel ◽  
Deenan Santhiya ◽  
Chandra Mohan Srivastava ◽  
Sarita Mishra ◽  
...  

Author(s):  
G. G. Shaw

The morphology and composition of the fiber-matrix interface can best be studied by transmission electron microscopy and electron diffraction. For some composites satisfactory samples can be prepared by electropolishing. For others such as aluminum alloy-boron composites ion erosion is necessary.When one wishes to examine a specimen with the electron beam perpendicular to the fiber, preparation is as follows: A 1/8 in. disk is cut from the sample with a cylindrical tool by spark machining. Thin slices, 5 mils thick, containing one row of fibers, are then, spark-machined from the disk. After spark machining, the slice is carefully polished with diamond paste until the row of fibers is exposed on each side, as shown in Figure 1.In the case where examination is desired with the electron beam parallel to the fiber, preparation is as follows: Experimental composites are usually 50 mils or less in thickness so an auxiliary holder is necessary during ion milling and for easy transfer to the electron microscope. This holder is pure aluminum sheet, 3 mils thick.


Author(s):  
K.L. More ◽  
R.A. Lowden

The mechanical properties of fiber-reinforced composites are directly related to the nature of the fiber-matrix bond. Fracture toughness is improved when debonding, crack deflection, and fiber pull-out occur which in turn depend on a weak interfacial bond. The interfacial characteristics of fiber-reinforced ceramics can be altered by applying thin coatings to the fibers prior to composite fabrication. In a previous study, Lowden and co-workers coated Nicalon fibers (Nippon Carbon Company) with silicon and carbon prior to chemical vapor infiltration with SiC and determined the influence of interfacial frictional stress on fracture phenomena. They found that the silicon-coated Nicalon fiber-reinforced SiC had low flexure strengths and brittle fracture whereas the composites containing carbon coated fibers exhibited improved strength and fracture toughness. In this study, coatings of boron or BN were applied to Nicalon fibers via chemical vapor deposition (CVD) and the fibers were subsequently incorporated in a SiC matrix. The fiber-matrix interfaces were characterized using transmission and scanning electron microscopy (TEM and SEM). Mechanical properties were determined and compared to those obtained for uncoated Nicalon fiber-reinforced SiC.


1995 ◽  
Vol 74 (06) ◽  
pp. 1501-1510 ◽  
Author(s):  
J Kuiper ◽  
H van de Bilt ◽  
U Martin ◽  
Th J C van Berkel

SummaryThe catabolism of the novel plasminogen activator reteplase (BM 06.022) was described. For this purpose BM 06.022 was radiolabelled with l25I or with the accumulating label l25I-tyramine cellobiose (l25I-TC).BM 06.022 was injected at a pharmacological dose of 380 μg/kg b.w. and it was cleared from the plasma in a biphasic manner with a half-life of about 1 min in the α-phase and t1/2of 20-28 min in the β-phase. 28% and 72% of the injected dose was cleared in the α-phase and β-phase, respectively. Initially liver, kidneys, skin, bones, lungs, spleen, and muscles contributed mainly to the plasma clearance. Only liver and the kidneys, however, were responsible for the uptake and subsequent degradation of BM 06.022 and contributed for 75% to the catabolism of BM 06.022. BM 06.022 was degraded in the lysosomal compartment of both organs. Parenchymal liver cells were responsible for 70% of the liver uptake of BM 06.022. BM 06.022 associated rapidly to isolated rat parenchymal liver cells and was subsequently degraded in the lysosomal compartment of these cells. BM 06.022 bound with low-affinity to the parenchymal liver cells (550 nM) and the binding of BM 06.022 could be displaced by t-PA (IC50 5.6 nM), indicating that the low-density lipoprotein receptor-related protein (LRP) could be involved in the binding of BM 06.022. GST-RAP, which is an inhibitor of LRP, could in vivo significantly inhibit the uptake of BM 06.022 in the liver.It is concluded that BM 06.022 is metabolized primarily in the liver and the kidneys. These organs take up and degrade BM 06.022 in the lysosomes. The uptake mechanism of BM 06.022 in the kidneys is unknown, while LRP is responsible for a low-affinity binding and uptake of BM 06.022 in parenchymal liver cells.


Sign in / Sign up

Export Citation Format

Share Document