Redox-Driven Reversible Structural Evolution of Isolated Silver Atoms Anchored to Specific Sites on γ-Al2O3

ACS Catalysis ◽  
2021 ◽  
pp. 544-559
Author(s):  
Hiroe Kubota ◽  
Shinya Mine ◽  
Takashi Toyao ◽  
Zen Maeno ◽  
Ken-ichi Shimizu
Keyword(s):  
Structural Evolution ◽  
Silver Atoms

Heterogeneous Precipitation at Dislocations

1969 ◽  
Vol 27 ◽  
pp. 70-71
Author(s):  
A. K. Eikum
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Dislocation Loops ◽  
Silver Alloys ◽  
Heterogeneous Precipitation ◽  
Precipitation Phenomena ◽  
Aluminum Base ◽  
Silver Atoms

Precipitation phenomena in concentrated aluminum-base silver alloys have been studied with a variety of techniques including electron microscopy. The purpose of the present work was to investigate the dislocation reactions that occur as silver atoms precipitate (or segregate) under a relatively low supersaturation. Specimens (0.1 mm thick) of Al-1 at. % Ag were quenched from ~500°C into an oil bath at room temperature and aged 30 min. at 265°C. The initial configurations available as sites for heterogeneous precipitation will therefore include perfect prismatic dislocation loops, Frank sessile loops and random segments of grown-in dislocations.

Microstructure and reactivity of small metal particles: The role of Ce additives

1992 ◽  
Vol 50 (1) ◽  
pp. 318-319
Author(s):  
L.D. Schmidt ◽  
K. R. Krause ◽  
J. M. Schwartz ◽  
X. Chu
Keyword(s):  
Atmospheric Pressure ◽  
Noble Metals ◽  
Mixed Oxides ◽  
Catalytic Properties ◽  
Chemical Shifts ◽  
Catalytic Converter ◽  
Structural Evolution ◽  
Single Particles ◽  
Small Metal Particles

The evolution of microstructures of 10- to 100-Å diameter particles of Rh and Pt on SiO2 and Al2O3 following treatment in reducing, oxidizing, and reacting conditions have been characterized by TEM. We are able to transfer particles repeatedly between microscope and a reactor furnace so that the structural evolution of single particles can be examined following treatments in gases at atmospheric pressure. We are especially interested in the role of Ce additives on noble metals such as Pt and Rh. These systems are crucial in the automotive catalytic converter, and rare earths can significantly modify catalytic properties in many reactions. In particular, we are concerned with the oxidation state of Ce and its role in formation of mixed oxides with metals or with the support. For this we employ EELS in TEM, a technique uniquely suited to detect chemical shifts with ∼30Å resolution.

Electrodeposition of Strained-Layer Superlattices

1996 ◽  
Vol 451 ◽  
Author(s):  
T. P. Moffat
Keyword(s):  
Charge Transfer ◽  
Mass Transport ◽  
Structural Evolution ◽  
Iron Group ◽  
Morphological Instability ◽  
Group Metal ◽  
Iron Group Metal ◽  
Transport Control ◽  
Strained Layer Superlattices ◽  
Interfacial Charge

ABSTRACTA variety of Cu/(Ni, Co) multilayers have been grown on Cu single crystals by pulse plating from an alloy electroplating bath. Copper is deposited under mass transport control while the iron group metal is deposited under interfacial charge transfer control. The structural evolution of these films is influenced by the morphological instability of the mass transport limited copper deposition reaction and the development of growth twins during iron-group metal deposition. Specular films have been obtained for growth on Cu(100) while rough, defective films were typically obtained for growth on Cu(111) and Cu(110).

Pattern Formation in Thin Polymer Films: A New Morphology

2000 ◽  
Vol 629 ◽  
Author(s):  
Jean-Loup Masson ◽  
Peter F. Green
Keyword(s):  
Growth Rate ◽  
Pattern Formation ◽  
Early Stage ◽  
Structural Evolution ◽  
Distinct Form ◽  
Thin Polymer Films ◽  
Intermediate Morphology ◽  
Thin Polymer ◽  
Nonwetting Liquid ◽  
Cylindrical Holes

ABSTRACTResearchers have shown that thin, nonwetting, liquid homopolymer films dewet substrates, forming patterns that reflect fluctuations in the local film thickness. These patterns have been shown to be either discrete cylindrical holes or bicontinuous “spinodal-like” patterns. In this paper we show the existence of a new morphology. During the early stage of dewetting, discrete highly asymmetric holes appear spontaneously throughout the film. The nucleation rate of these holes is faster than their growth rate. The morphology of the late stage of evolution, after 18 days, is characterized by a bicontinuous pattern, distinct form conventional spinodal dewetting patterns. This morphology has been observed for a range of film thicknesses between 7.5 and 21nm. The structural evolution of this intermediate morphology is discussed.

Tunable Carbon Surface from Mono- to Multi-Metallic Single Atoms

2020 ◽  
Author(s):  
Weihong Lai ◽  
Heng Wang ◽  
Quan jiang ◽  
Zichao Yan ◽  
Hanwen Liu ◽  
...  
Keyword(s):  
Synergistic Effects ◽  
Structural Evolution ◽  
Charge Compensation ◽  
Catalytic Reactions ◽  
Single Atom ◽  
Carbon Surface ◽  
Hydrogen Electrode ◽  
Single Atoms ◽  
Mass Activity ◽  
Co Doped

<p>Herein, we develop a non-selective charge compensation strategy to prepare multi-single-atom doped carbon (MSAC) in which a sodium p-toluenesulfonate (PTS-Na) doped polypyrrole (S-PPy) polymer is designed to anchor discretionary mixtures of multiple metal cations, including iron (Fe<sup>3+</sup>), cobalt (Co<sup>3+</sup>), ruthenium (Ru<sup>3+</sup>), palladium (Pd<sup>2+</sup>), indium (In<sup>3+</sup>), iridium (Ir<sup>2+</sup>), and platinum (Pt<sup>2+</sup>) . As illustrated in Figure 1, the carbon surface can be tuned with different level of compositional complexities, including unary Pt<sub>1</sub>@NC, binary (MSAC-2, (PtFe)<sub>1</sub>@NC), ternary (MSAC-3, (PtFeIr)<sub>1</sub>@NC), quaternary (MSAC-4, (PtFeIrRu)<sub>1</sub>@NC), quinary (MSAC-5, (PtFeIrRuCo)<sub>1</sub>@NC), senary (MSAC-6, (PtFeIrRuCoPd)<sub>1</sub>@NC), and septenary (MSAC-7, (PtFeIrRuCoPdIn)<sub>1</sub>@NC) samples. The structural evolution of carbon surface dictates the activities of both ORR and HER. The senary MSAC-6 achieves the ORR mass activity of 18.1 A·mg<sub>metal</sub><sup>-1</sup> at 0.9 V (Vs reversible hydrogen electrode (RHE)) over 30K cycles, which is 164 times higher than that of commercial Pt/C. The quaternary MSAC-4 presented a comparable HER catalytic capability with that of Pt/C. These results indicate that the highly complexed carbon surface can enhance its ability over general electrochemical catalytic reactions. The mechanisms regarding of the ORR and HER activities of the alternated carbon surface are also theoretically and experimentally investigated in this work, showing that the synergistic effects amongst the co-doped atoms can activate or inactivate certain single-atom sites.</p>

Sign in / Sign up

Export Citation Format

Share Document