Capacitive Pressure Sensor with Wide-Range, Bendable, and High Sensitivity Based on the Bionic Komochi Konbu Structure and Cu/Ni Nanofiber Network

2019 ◽  
Vol 11 (12) ◽  
pp. 11928-11935 ◽  
Author(s):  
Jian Wang ◽  
Ryuki Suzuki ◽  
Marine Shao ◽  
Frédéric Gillot ◽  
Seimei Shiratori
Keyword(s):  
Pressure Sensor ◽  
High Sensitivity ◽  
Capacitive Pressure Sensor ◽  
Wide Range

Silicon Carbide MEMS Capacitive Pressure Sensor for Harsh Environments

2013 ◽  
Author(s):  
Zhibang Chen ◽  
Wei Du ◽  
Feng Zhao
Keyword(s):  
Silicon Carbide ◽  
Pressure Sensor ◽  
Large Scale ◽  
Applied Pressure ◽  
High Sensitivity ◽  
Capacitive Pressure Sensor ◽  
Wide Range ◽  
Sensor Structure ◽  
Nuclear Station ◽  
Oil Gas

In this paper, we investigated a new capacitive pressure sensor structure on a silicon carbide (SiC) platform for high sensitivity and harsh environment operation capability. The superior material properties of SiC ensure robustness of the new sensor to withstand large-scale pressure at high temperature and in chemical/biological medium. The sensor structure consists of a circular SiC diaphragm suspended by four arms over a SiC substrate, with design to enable diaphragm to deflect nearly uniformly with applied pressure. This configuration results in improved sensing properties. With high sensitivity and operation capability in hostile environment, this new pressure sensor is promising for use in a wide range of applications such as automotive, nuclear station, aerospace, and oil/gas exploration, etc.

Flexible M-Tooth Hybrid Micro-Structure Based Capacitive Pressure Sensor with High Sensitivity and Wide Sensing Range

2021 ◽  
pp. 1-1
Author(s):  
Valliammai Palaniappan ◽  
Masoud Panahi ◽  
Dinesh Maddipatla ◽  
Xingzhe Zhang ◽  
Simin Masihi ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
High Sensitivity ◽  
Capacitive Pressure Sensor ◽  
Micro Structure ◽  
Sensing Range

scholarly journals Locally Controlled Sensing Properties of Stretchable Pressure Sensors Enabled by Micro-Patterned Piezoresistive Device Architecture

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6588
Author(s):  
Jun Ho Lee ◽  
Jae Sang Heo ◽  
Keon Woo Lee ◽  
Jae Cheol Shin ◽  
Jeong-Wan Jo ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Silver Nanowires ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Fast Response ◽  
Large Area ◽  
Site Specific ◽  
Sensing Properties ◽  
Sensing Range ◽  
Wide Range

For wearable health monitoring systems and soft robotics, stretchable/flexible pressure sensors have continuously drawn attention owing to a wide range of potential applications such as the detection of human physiological and activity signals, and electronic skin (e-skin). Here, we demonstrated a highly stretchable pressure sensor using silver nanowires (AgNWs) and photo-patternable polyurethane acrylate (PUA). In particular, the characteristics of the pressure sensors could be moderately controlled through a micro-patterned hole structure in the PUA spacer and size-designs of the patterned hole area. With the structural-tuning strategies, adequate control of the site-specific sensitivity in the range of 47~83 kPa−1 and in the sensing range from 0.1 to 20 kPa was achieved. Moreover, stacked AgNW/PUA/AgNW (APA) structural designed pressure sensors with mixed hole sizes of 10/200 µm and spacer thickness of 800 µm exhibited high sensitivity (~171.5 kPa−1) in the pressure sensing range of 0~20 kPa, fast response (100~110 ms), and high stretchability (40%). From the results, we envision that the effective structural-tuning strategy capable of controlling the sensing properties of the APA pressure sensor would be employed in a large-area stretchable pressure sensor system, which needs site-specific sensing properties, providing monolithic implementation by simply arranging appropriate micro-patterned hole architectures.

Study of High-Temperature MEMS Pressure Sensor Based on SiC-AlN Structure

2013 ◽  
Vol 562-565 ◽  
pp. 471-476 ◽  
Author(s):  
Hao Jie Lv ◽  
Tao Geng ◽  
Guo Qing Hu
Keyword(s):  
High Temperature ◽  
Pressure Sensor ◽  
Sandwich Structure ◽  
High Sensitivity ◽  
High Accuracy ◽  
External Pressure ◽  
Harsh Environment ◽  
Capacitive Pressure Sensor ◽  
Technical Process ◽  
Higher Temperature

In the paper, a touch mode capacitive pressure sensor with double-notches structure is presented. The sensor employs a special SiC-AlN-SiC sandwich structure to achieve high-accuracy pressure measurement in hash environment such as high-temperature. The analysis to the relation of capacitance and external pressure of the sensor shows that the sensor has high sensitivity and long linear range simultaneously. In addition, the technical process of the sensor has been designed in detail in the paper. The research shows that the sensor packaged in a high-temperature ceramic AlN can withstand higher temperature. Consequently, the sensor can be applied in high-temperature and harsh environment.

Flexible Pressure Sensor Based on Photo Paper-Molded Micro-Structural AgNWs/PDMS Electrode

2015 ◽  
Vol 748 ◽  
pp. 1-4 ◽  
Author(s):  
Li Xin Mo ◽  
Yu Qun Hou ◽  
Qing Bin Zhai ◽  
Wen Guan Zhang ◽  
Lu Hai Li
Keyword(s):  
Pressure Sensor ◽  
Silver Nanowires ◽  
Low Cost ◽  
Flexible Substrate ◽  
High Sensitivity ◽  
Low Energy ◽  
Capacitive Pressure Sensor ◽  
Micro Structure ◽  
Energy Consuming ◽  
Flexible Pressure Sensor

The novel flexible pressure sensor with skin-like stretchability and sensibility has attracted tremendous attention in academic and industrial world in recent years. And it also has demonstrated great potential in the applications of electronic skin and wearable devices. It is significant and challenging to develop a highly sensitive flexible pressure sensor with a simple, low energy consuming and low cost method. In this paper, the silver nanowires (AgNWs) as electrode material were synthesized by polyol process. The polydimethylsiloxane (PDMS) was chosen as a flexible substrate and polyimide (PI) film as dielectric layer. The AgNWs based electrode was prepared in two methods. One is coating the AgNWs on photographic paper followed by in situ PDMS curing. Another one is suction filtration of the AgNWs suspension followed by glass slide transfer and PDMS curing. Then the capacitive pressure sensor was packaged in a sandwich structure with two face to face electrodes and a PI film in the middle. The sensitivity of the sensor as well as the micro-structure of the electrodes was compared and studied. The results indicate that the roughness of the electrode based on AgNWs/PDMS micro-structure plays an important role in the sensitivity of sensor. The as-prepared flexible pressure sensor demonstrates high sensitivity of 0.65kPa-1. In addition, the fabrication method is simple, low energy consuming and low cost, which has great potential in the detection of pulse, heart rate, sound vibration and other tiny pressure.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

A capacitive sensor using resin thermoplastic elastomer and carbon fibers for monitoring pressure distribution

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Guanzheng Wu ◽  
Siming Li ◽  
Jiayu Hu ◽  
Manchen Dong ◽  
Ke Dong ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Carbon Fibers ◽  
Pressure Sensor ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Thermoplastic Elastomer ◽  
Gauge Factor ◽  
Capacitive Pressure Sensor ◽  
Wearable Electronics ◽  
Content Type

Purpose This paper aims to study the working principle of the capacitive pressure sensor and explore the distribution of pressure acting on the surface of the capacitor. Herein, a kind of high sensitivity capacitive pressure sensor was prepared by overlaying carbon fibers (CFs) on the surfaces of the thermoplastic elastomer (TPE), the TPE with high elasticity is a dielectric elastomer for the sensor and the CFs with excellent electrical conductivity were designed as the conductor. Design/methodology/approach Due to the excellent mechanical properties and electrical conductivity of CFs, it was designed as the conductor layer for the TPE/CFs capacitive pressure sensor via laminating CFs on the surfaces of the columnar TPE. Then, a ‘#' type structure of the capacitive pressure sensor was designed and fabricated. Findings The ‘#' type of capacitive pressure sensor of TPE/CFs composite was obtained in high sensitivity with a gauge factor of 2.77. Furthermore, the change of gauge factor values of the sensor under 10 per cent of applied strains was repeated for 1,000 cycles, indicating its outstanding sensing stability. Moreover, the ‘#' type capacitive pressure sensor of TPE/CFs was consisted of several capacitor arrays via laminating CFs, which could detect the distribution of pressure. Research limitations/implications The TPE/CFs capacitive pressure sensor was easily fabricated with high sensitivity and quick responsiveness, which is desirably applied in wearable electronics, robots, medical devices, etc. Originality/value The outcome of this study will help to fabricate capacitive pressure sensors with high sensitivity and outstanding sensing stability.

Sign in / Sign up

Export Citation Format

Share Document