Electrospun p-Type Nickel Oxide Semiconducting Nanowires for Low-Voltage Field-Effect Transistors

2017 ◽  
Vol 10 (31) ◽  
pp. 25841-25849 ◽  
Author(s):  
Ao Liu ◽  
You Meng ◽  
Huihui Zhu ◽  
Yong-Young Noh ◽  
Guoxia Liu ◽  
...  
Keyword(s):  
Nickel Oxide ◽  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
Semiconducting Nanowires ◽  
P Type ◽  
Type Nickel

Electrospun p-type CuO nanofibers for low-voltage field-effect transistors

2017 ◽  
Vol 111 (14) ◽  
pp. 143501 ◽  
Author(s):  
Huihui Zhu ◽  
Ao Liu ◽  
Guoxia Liu ◽  
Fukai Shan
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
P Type

scholarly journals Nanonet: Low-temperature-processed tellurium nanowire network for scalable p-type field-effect transistors and a highly sensitive phototransistor array

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  
Keyword(s):  
Low Temperature ◽  
Field Effect ◽  
High Performance ◽  
Field Effect Transistors ◽  
Optical Measurements ◽  
Electrical Performance ◽  
Large Area ◽  
Nanowire Network ◽  
P Type ◽  
Nanowire Networks

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.

scholarly journals Large Area Emission in p-Type Polymer-Based Light-Emitting Field-Effect Transistors by Incorporating Charge Injection Interlayers

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 901
Author(s):  
Gizem Acar ◽  
Muhammad Javaid Iqbal ◽  
Mujeeb Ullah Chaudhry
Keyword(s):  
Field Effect ◽  
Field Effect Transistors ◽  
Charge Injection ◽  
Limiting Factors ◽  
Hole Injection ◽  
Large Area ◽  
Device Structure ◽  
Light Emitting ◽  
Emission Area ◽  
P Type

Organic light-emitting field-effect transistors (LEFETs) provide the possibility of simplifying the display pixilation design as they integrate the drive-transistor and the light emission in a single architecture. However, in p-type LEFETs, simultaneously achieving higher external quantum efficiency (EQE) at higher brightness, larger and stable emission area, and high switching speed are the limiting factors for to realise their applications. Herein, we present a p-type polymer heterostructure-based LEFET architecture with electron and hole injection interlayers to improve the charge injection into the light-emitting layer, which leads to better recombination. This device structure provides access to hole mobility of ~2.1 cm2 V−1 s−1 and EQE of 1.6% at a luminance of 2600 cd m−2. Most importantly, we observed a large area emission under the entire drain electrode, which was spatially stable (emission area is not dependent on the gate voltage and current density). These results show an important advancement in polymer-based LEFET technology toward realizing new digital display applications.

scholarly journals All-Organic, Low Voltage, Transparent and Compliant Organic Field-Effect Transistor Fabricated by Means of Large-Area, Cost-Effective Techniques

2020 ◽  
Vol 10 (19) ◽  
pp. 6656
Author(s):  
Stefano Lai ◽  
Giulia Casula ◽  
Pier Carlo Ricci ◽  
Piero Cosseddu ◽  
Annalisa Bonfiglio
Keyword(s):  
Field Effect ◽  
Low Voltage ◽  
Field Effect Transistors ◽  
High Mobility ◽  
Chemical Vapor ◽  
Cost Effective ◽  
Large Area ◽  
Parylene C ◽  
Biomedical Sensing ◽  
Novel Applications

The development of electronic devices with enhanced properties of transparency and conformability is of high interest for the development of novel applications in the field of bioelectronics and biomedical sensing. Here, a fabrication process for all organic Organic Field-Effect Transistors (OFETs) by means of large-area, cost-effective techniques such as inkjet printing and chemical vapor deposition is reported. The fabricated device can operate at low voltages (as high as 4 V) with ideal electronic characteristics, including low threshold voltage, relatively high mobility and low subthreshold voltages. The employment of organic materials such as Parylene C, PEDOT:PSS and 6,13-Bis(triisopropylsilylethynyl)pentacene (TIPS pentacene) helps to obtain highly transparent transistors, with a relative transmittance exceeding 80%. Interestingly enough, the proposed process can be reliably employed for OFET fabrication over different kind of substrates, ranging from transparent, flexible but relatively thick polyethylene terephthalate (PET) substrates to transparent, 700-nm-thick, compliant Parylene C films. OFETs fabricated on such sub-micrometrical substrates maintain their functionality after being transferred onto complex surfaces, such as human skin and wearable items. To this aim, the electrical and electromechanical stability of proposed devices will be discussed.

Organic solar cells employing magnetron sputtered p-type nickel oxide thin film as the anode buffer layer

2010 ◽  
Vol 94 (12) ◽  
pp. 2332-2336 ◽  
Author(s):  
Sun-Young Park ◽  
Hye-Ri Kim ◽  
Yong-Jin Kang ◽  
Dong-Ho Kim ◽  
Jae-Wook Kang
Keyword(s):  
Thin Film ◽  
Solar Cells ◽  
Nickel Oxide ◽  
Buffer Layer ◽  
Organic Solar Cells ◽  
Oxide Thin Film ◽  
Anode Buffer Layer ◽  
P Type ◽  
Type Nickel ◽  
Nickel Oxide Thin Film
Sign in / Sign up

Export Citation Format

Share Document