Mechanical Properties of Plasma Immersion Ion Implanted PEEK for Bioactivation of Medical Devices

2015 ◽  
Vol 7 (41) ◽  
pp. 23029-23040 ◽  
Author(s):  
Edgar A. Wakelin ◽  
Ali Fathi ◽  
Masturina Kracica ◽  
Giselle C. Yeo ◽  
Steven G. Wise ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Medical Devices ◽  
Ion Implanted

Ultra-Microhardness Tests on Ion Implanted Metal Surfaces

1981 ◽  
Vol 7 ◽  
Author(s):  
J.B. Pethica ◽  
W.C. Oliver
Keyword(s):  
Mechanical Properties ◽  
Ion Implantation ◽  
Metal Surfaces ◽  
Nitrogen Ion Implantation ◽  
Nitrogen Ion ◽  
High Doses ◽  
Penetration Depths ◽  
Ion Implanted

ABSTRACTTo measure the mechanical properties of ion implanted layers special microhardness tests with penetration depths less than 100 nm have been made. The results show that increases in hardness of up to 50 % may occur in a number of metals as a result of nitrogen ion implantation. Considerable carbon is also present in the implanted surfaces and when in the form of a distinct layer, may give an apparent softening of surfaces at high doses.

scholarly journals Experimental Measurements of Mechanical Properties of PUR Foam Used for Testing Medical Devices and Instruments Depending on Temperature, Density and Strain Rate

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4560 ◽  
Author(s):  
Zdenek Horak ◽  
Karel Dvorak ◽  
Lucie Zarybnicka ◽  
Hana Vojackova ◽  
Jana Dvorakova ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Mechanical Testing ◽  
Medical Devices ◽  
Optical Microscope ◽  
Surgical Instruments ◽  
Effect Of Temperature ◽  
Experimental Measurements ◽  
Compression Tests ◽  
Biomedical Material

Rigid polyurethane (PUR) foam is products used as a biomedical material for medical device testing. Thermal stability is a very important parameter for evaluating the feasibility of use for testing surgical instrument load during drilling. This work aimed to perform experimental measurements to determine the dependence of the mechanical properties of a certified PUR on temperature, strain rate and density. Experimental measurements were realised for three types of the PUR samples with different density 10, 25 and 40 pounds per cubic foot. The samples were characterised in terms of their mechanical properties evaluated from tensile and compression tests at temperatures of 25 °C, 90 °C and 155 °C. Furthermore, the structures of the samples were characterised using optical microscope, their thermal properties were characterised by thermogravimetric analysis, and their density and stiffness with the effect of temperature was monitored. The results show that it is optimal not only for mechanical testing but also for testing surgical instruments that generate heat during machining. On the basis of experimental measurements and evaluations of the obtained values, the tested materials are suitable for mechanical testing of medical devices. At the same time, this material is also suitable for testing surgical instruments that generate heat during machining.

scholarly journals Nano/micro-mechanical and tribological characterization of Ar, C, N, and Ne ion-implanted Si

2010 ◽  
Vol 25 (5) ◽  
pp. 880-889 ◽  
Author(s):  
Zhi-Hui Xu ◽  
Young-Bae Park ◽  
Xiaodong Li
Keyword(s):  
Mechanical Properties ◽  
Tribological Properties ◽  
Crystalline Silicon ◽  
Semiconductor Industry ◽  
Damage Mechanism ◽  
Mechanical And Tribological Properties ◽  
Tribological Characterization ◽  
The Relationship ◽  
Ion Implanted

Ion implantation has been widely used to improve the mechanical and tribological properties of single crystalline silicon, an essential material for the semiconductor industry. In this study, the effects of four different ion implantations, Ar, C, N, and Ne ions, on the mechanical and tribological properties of single crystal Si were investigated at both the nanoscale and the microscale. Nanoindentation and microindentation were used to measure the mechanical properties and fracture toughness of ion-implanted Si. Nano and micro scratch and wear tests were performed to study the tribological behaviors of different ion-implanted Si. The relationship between the mechanical properties and tribological behavior and the damage mechanism of scratch and wear were also discussed.

scholarly journals Microstructure and Mechanical Properties of Ti + N Ion Implanted Cronidur30 Steel

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 427 ◽  
Author(s):  
Jie Jin ◽  
Wei Wang ◽  
Xinchun Chen
Keyword(s):  
Mechanical Properties ◽  
Ion Implantation ◽  
Photoelectron Spectroscopy ◽  
Structural Modification ◽  
Surface Region ◽  
Grazing Incidence ◽  
Bearing Steel ◽  
Near Surface ◽  
X Ray ◽  
Ion Implanted

In this study, Ti + N ion implantation was used as a surface modification method for surface hardening and friction-reducing properties of Cronidur30 bearing steel. The structural modification and newly-formed ceramic phases induced by the ion implantation processes were investigated by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and grazing incidence X-ray diffraction (GIXRD). The mechanical properties of the samples were tested by nanoindentation and friction experiments. The surface nanohardness was also improved significantly, changing from ~10.5 GPa (pristine substrate) to ~14.2 GPa (Ti + N implanted sample). The friction coefficient of Ti + N ion implanted samples was greatly reduced before failure, which is less than one third of pristine samples. Furthermore, the TEM analyses confirmed a trilamellar structure at the near-surface region, in which amorphous/ceramic nanocrystalline phases were embedded into the implanted layers. The combined structural modification and hardening ceramic phases played a crucial role in improving surface properties, and the variations in these two factors determined the differences in the mechanical properties of the samples.

Hardness as a Measure of Wear Resistance

1983 ◽  
Vol 27 ◽  
Author(s):  
W.C. Oliver ◽  
R. Hutchings ◽  
J.B. Pethica ◽  
I.L. Singer ◽  
G.K. Hubler
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Wear Rate ◽  
Wear Mechanism ◽  
Chemical Nature ◽  
Bearing Steel ◽  
Mechanical Properties Of Materials ◽  
Microhardness Data ◽  
Properties Of Materials ◽  
Ion Implanted

ABSTRACTOne measure of the surface mechanical properties of materials can be obtained through microhardness data. The success of microhardness in predicting the improvements in wear resistance of ion implanted metals has been mixed. In this paper the cases of N implantation into 304 S.S. and Ti implantation into 52100 bearing steel will be examined. Microhardness data indicates little or no hardness changes whereas large wear rate changes are observed. From these two examples it is clear that the wear mechanism, the chemical nature of the surface, the ductility, and the toughness can be more important than the hardness changes.

Sign in / Sign up

Export Citation Format

Share Document