In Situ Controllable Fabrication of Two-Dimensional Magnetic Fe3O4/TiO2@Ti3C2Tx Composites for Highly Efficient Phosphopeptides Enrichment

2021 ◽  
Author(s):  
Lingzhu Yu ◽  
Bin Luo ◽  
Xiaoxi Zhou ◽  
Yicheng Liu ◽  
Fang Lan ◽  
...  
Keyword(s):  
Two Dimensional ◽  
Highly Efficient ◽  
Controllable Fabrication ◽  
Magnetic Fe3o4

In situ polydopamine-assisted deposition of silver nanoparticles on a two dimensional support as an inexpensive and highly efficient SERS substrate

RSC Advances ◽  
2015 ◽  
Vol 5 (46) ◽  
pp. 36368-36373 ◽  
Author(s):  
Peilan Wang ◽  
Yanling Zhou ◽  
Ying Wen ◽  
Feng Wang ◽  
Haifeng Yang
Keyword(s):  
Silver Nanoparticles ◽  
Sers Substrate ◽  
Two Dimensional ◽  
Highly Efficient

Versatile substrates were modified with polydopamine followed by in situ AgNP deposition to fabricate a cheap, flexible and disposable SERS substrate.

Self-evolved hydrogen peroxide boosts photothermal-promoted tumor-specific nanocatalytic therapy

2019 ◽  
Vol 7 (22) ◽  
pp. 3599-3609 ◽  
Author(s):  
Shanshan Gao ◽  
Xiangyu Lu ◽  
Piao Zhu ◽  
Han Lin ◽  
Luodan Yu ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Fenton Reaction ◽  
Rational Design ◽  
Tumor Therapy ◽  
Two Dimensional ◽  
Highly Efficient

Highly efficient nanocatalytic tumor therapy has been achieved by in situ self-supplied H2O2-triggered and photothermally-promoted Fenton reaction by the rational design of two-dimensional composite nanoreactors.

Concomitant induction to few-layer and 1T-rich two-dimensional MoS2 by rigid segment-containing polysulfide as a sulfur source and in situ intercalator

2021 ◽  
Author(s):  
Yijuan Wang ◽  
Jianzhi Wang ◽  
Jie Liu ◽  
Zhuangwei Xiao ◽  
Yanan Xue ◽  
...  
Keyword(s):  
Sulfur Source ◽  
Two Dimensional ◽  
Rigid Segment

A rigid segment-containing polysulfide was used as a sulfur source and in situ intercalator to induce the formation of few-layer and 1T-rich MoS2.

Catalytic asymmetric hydrogenation reaction by in situ formed ultra-fine metal nanoparticles in live thermophilic hydrogen-producing bacteria

Nanoscale ◽  
2021 ◽  
Author(s):  
Wei Bing ◽  
Faming Wang ◽  
Yuhuan Sun ◽  
Jinsong Ren ◽  
Xiaogang Qu
Keyword(s):  
Metal Nanoparticles ◽  
Catalytic Hydrogenation ◽  
Asymmetric Hydrogenation ◽  
Environmentally Friendly ◽  
Hydrogenation Reaction ◽  
Highly Efficient ◽  
Hydrogenation Reactions ◽  
Live Bacteria ◽  
Catalytic Asymmetric Hydrogenation

An environmentally friendly biomimetic strategy has been presented and validated for the catalytic hydrogenation reaction in live bacteria. In situ formed ultra-fine metal nanoparticles can realize highly efficient asymmetric hydrogenation reactions.

scholarly journals A Self-Established “Machining-Measurement-Evaluation” Integrated Platform for Taper Cutting Experiments and Applications

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 929
Author(s):  
Xudong Yang ◽  
Zexiao Li ◽  
Linlin Zhu ◽  
Yuchu Dong ◽  
Lei Liu ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Precision Machining ◽  
Two Dimensional ◽  
Dimensional Image ◽  
Two Dimensional Image ◽  
Integrated Platform ◽  
Hard And Brittle Materials ◽  
Ultra Precision ◽  
Cutting Experiments

Taper-cutting experiments are important means of exploring the nano-cutting mechanisms of hard and brittle materials. Under current cutting conditions, the brittle-ductile transition depth (BDTD) of a material can be obtained through a taper-cutting experiment. However, taper-cutting experiments mostly rely on ultra-precision machining tools, which have a low efficiency and high cost, and it is thus difficult to realize in situ measurements. For taper-cut surfaces, three-dimensional microscopy and two-dimensional image calculation methods are generally used to obtain the BDTDs of materials, which have a great degree of subjectivity, leading to low accuracy. In this paper, an integrated system-processing platform is designed and established in order to realize the processing, measurement, and evaluation of taper-cutting experiments on hard and brittle materials. A spectral confocal sensor is introduced to assist in the assembly and adjustment of the workpiece. This system can directly perform taper-cutting experiments rather than using ultra-precision machining tools, and a small white light interference sensor is integrated for in situ measurement of the three-dimensional topography of the cutting surface. A method for the calculation of BDTD is proposed in order to accurately obtain the BDTDs of materials based on three-dimensional data that are supplemented by two-dimensional images. The results show that the cutting effects of the integrated platform on taper cutting have a strong agreement with the effects of ultra-precision machining tools, thus proving the stability and reliability of the integrated platform. The two-dimensional image measurement results show that the proposed measurement method is accurate and feasible. Finally, microstructure arrays were fabricated on the integrated platform as a typical case of a high-precision application.

MOF-derived M-OOH with rich oxygen defects by in-situ electro-oxidation reconstitution for highly efficient oxygen evolution reaction

2021 ◽  
Author(s):  
Zhikai Shi ◽  
Zebin Yu ◽  
Ronghua Jiang ◽  
Jun Huang ◽  
Yanping Hou ◽  
...  
Keyword(s):  
Oxygen Evolution ◽  
Oxygen Evolution Reaction ◽  
Energy Production ◽  
Low Cost ◽  
Highly Efficient ◽  
Oxygen Defects ◽  
Electro Oxidation

The oxygen evolution reaction (OER) is an important half-reaction in the field of energy production. However, how effectively, simply, and greenly to prepare low-cost OER electrocatalysts remains a problem. Herein,...

scholarly journals A thin, deformable, high-performance supercapacitor implant that can be biodegraded and bioabsorbed within an animal body

2021 ◽  
Vol 7 (2) ◽  
pp. eabe3097
Author(s):  
Hongwei Sheng ◽  
Jingjing Zhou ◽  
Bo Li ◽  
Yuhang He ◽  
Xuetao Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Electronic Devices ◽  
Form Factors ◽  
Time Frame ◽  
Water Soluble ◽  
Two Dimensional ◽  
Medical Electronics ◽  
Thin Structure ◽  
Shed Light

It has been an outstanding challenge to achieve implantable energy modules that are mechanically soft (compatible with soft organs and tissues), have compact form factors, and are biodegradable (present for a desired time frame to power biodegradable, implantable medical electronics). Here, we present a fully biodegradable and bioabsorbable high-performance supercapacitor implant, which is lightweight and has a thin structure, mechanical flexibility, tunable degradation duration, and biocompatibility. The supercapacitor with a high areal capacitance (112.5 mF cm−2 at 1 mA cm−2) and energy density (15.64 μWh cm−2) uses two-dimensional, amorphous molybdenum oxide (MoOx) flakes as electrodes, which are grown in situ on water-soluble Mo foil using a green electrochemical strategy. Biodegradation behaviors and biocompatibility of the associated materials and the supercapacitor implant are systematically studied. Demonstrations of a supercapacitor implant that powers several electronic devices and that is completely degraded after implantation and absorbed in rat body shed light on its potential uses.

In-situ liquid cell transmission electron microscopy guiding the design of large-sized cocatalysts coupled with ultra-small photocatalysts for highly efficient energy harvesting

2021 ◽  
Author(s):  
Chunlang Gao ◽  
Chunqiang Zhuang ◽  
Yuanli Li ◽  
Heyang Qi ◽  
Ge Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Energy Harvesting ◽  
Design Strategy ◽  
Efficient Energy ◽  
Highly Efficient ◽  
Transmission Electron ◽  
Cell Transmission ◽  
Liquid Cell

In this study, we employed in-situ liquid cell transmission electron microscopy (LC-TEM) to carry out the new design strategy of precisely regulating the microstructure of large-sized cocatalysts for highly efficient...

Sign in / Sign up

Export Citation Format

Share Document